By visiting this site, you accept the use of cookies. More about our cookie policy.

GOST 7668-80

GOST R ISO 22034-1-2013 GOST R ISO 22034-2-2013 GOST P 53772-2010 GOST 5468-88 GOST 1579-93 GOST 10447-93 GOST 3187-76 GOST 9870-61 GOST 4034-63 GOST 4032-63 GOST 4028-63 GOST 792-67 GOST 16135-70 GOST 3920-70 GOST 9850-72 GOST 7675-73 GOST 18901-73 GOST 3062-80 GOST 3093-80 GOST 1526-81 GOST 2771-81 GOST 3875-83 GOST 3071-88 GOST R 50575-93 GOST P 50708-94 GOST 4033-63 GOST 13840-68 GOST 15598-70 GOST 3090-73 GOST 3110-74 GOST 3339-74 GOST 3120-75 GOST 283-75 GOST 10505-76 GOST 14963-78 GOST 14081-78 GOST 7372-79 GOST 5663-79 GOST 1545-80 GOST 3092-80 GOST 9161-85 GOST 29121-91 GOST 18143-72 GOST 1668-73 GOST 7480-73 GOST 7676-73 GOST 3193-2015 GOST 2715-75 GOST 10506-76 GOST 7669-80 GOST 2333-80 GOST 7668-80 GOST 3069-80 GOST 7667-80 GOST 2688-80 GOST 3089-80 GOST 3081-80 GOST 6727-80 GOST 3083-80 GOST 3091-80 GOST 7665-80 GOST 3077-80 GOST 2387-80 GOST 3064-80 GOST 3063-80 GOST 7348-81 GOST 5437-85 GOST 14118-85 GOST 23279-2012 GOST 14311-85 GOST 9074-85 GOST 3068-88 GOST 13603-89 GOST P 50566-93 GOST 4030-63 GOST 4035-63 GOST 4029-63 GOST 15892-70 GOST 11850-72 GOST 18899-73 GOST 6750-75 GOST 3088-80 GOST 10446-80 GOST 14954-80 GOST 7681-80 GOST 3079-80 GOST 3066-80 GOST 3097-80 GOST 3085-80 GOST 8478-81 GOST 4727-83 GOST 18834-83 GOST 26366-84 GOST 9124-85 GOST 3067-88 GOST 3070-88 GOST 3306-88 GOST 8803-89 GOST 17305-91 GOST P 50567-93 GOST 9389-75 GOST 2172-80 GOST 1071-81 GOST 3826-82 GOST 16853-88 GOST 12766.1-90 GOST 3241-91 GOST 16828-81 GOST 285-69 GOST 6613-86 GOST 28334-89 GOST 16827-81 GOST 5336-80 GOST 3282-74

GOST 7668−80 rope double twist rope, type LC-RO construction 6х36 (1+7+7/7+14)+1 O. S. Assortment (with Amendments No. 1, 2)

GOST 7668−80
The Group Of 75

INTERSTATE STANDARD

The DOUBLE LAY ROPE, TYPE LC-RO CONSTRUCTION 6х36 (1+7+7/7+14)+1 O. S.

Assortment

Two lay rope type LK-RO, construction 6х36 (1+7+7/7+14)+1 O. S. Dimensions

ISS 77.140.65
OKP 12 5100, 12 5200

Date of introduction 1982−01−01

Resolution of the USSR State Committee for standards of 23 April 1980, N 1835 date of introduction is established 01.01.82

The expiration time limit is removed by the Resolution of Gosstandart from 22.11.91 N 1790

REPLACE GOST 7668−69

Edition (may 2011) with Amendments No. 1, 2 approved in November 1986, November 1991 (IUS 2−87, 2−92), Amendment (ICS 6−2006)

1. This standard applies to steel ropes double lay linear touch the wires in the strands type LK-RO one organic core.

ГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)

2. The ropes are classified by signs

for the purpose:

gruzolyudskie — GL,

freight — G;

mechanical properties grades: VC, V, 1;

by coating the surface of wire rope:

from wire without coating,

galvanized wire depending on the surface density of zinc: C, W, coolant;

direction of lay:

right

left — L;

the combination of the guide elements of lay of rope:

Phillips,

unilateral —

combination — K;

by way of lay:

prosrochena — N,

unwinding;

for precision manufacturing:

normal

high — T;

according to the degree of balance:

ratowanie — R,

neritani.

Examples of symbols


Rope with a diameter of 39.5 mm, cargo destination, from wire without coating, grade I, right-sided lay, spun, ratowania, normal accuracy, marking the group 1770 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(180 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)):

Rope 39,5-G-I-O-R-1770 GOST 7668−80


Same, diameter 18,0 mm, gruzopodemnogo purpose of the brand, galvanized by the group coolant, left unilateral lay prescripcialis, Neradovsky, high precision, marking groups 1570 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(160 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)):

The rope 18-GL-coolant-L-O-N-T-1570 GOST 7668−80

3. The diameter of rope and basic parameters shall be as specified in the table.

Diameter, mm

The estimated area
all sections of wires, mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)

Estimated
the weight of 1000 m lubricated
rope, kg

Marking group, N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2))

ka-
on-
the
wire
1370 (140)
penny
RAL-
Noah
per-
the first layer
second
layer
the third layer (na
raznogo)
Breaking strength,
N, not less
6
Provo-
Locke
42 Provo
Loki
42 Provo
Loki
42 Provo
Loki
84
Provo-
Loki
the total of all wires in the rope
rope
in General
6,3
0,38
0,28
0,28
0,20
0,36
15,72
155,5
-
-
6,7
0,40
0,30
0,30
0,22
0,38
Of 17.81
176,0
-
-
7,4

0,45
0,32
0,32
0,24
0,40
20,16
199,0
-
-
8,1
0,50
0,36
0,36
0,28
0,45
25,67
253,5
-
-
9,0
0,55
0,40
0,40
0,30
0,50
31,45
310,5
-
-
9,7

0,60
0,45
0,45
0,34
0,55
38,82
383,5
-
-
11,5
0,70
0,50
0,50
0,40
0,65
51,96
513,0
-
-
13,5

0,80
0,60 0,60
0,45
0,75
70,55
696,5 - -
15,0
0,90
0,65
0,65
0,50
0,80
82,16
812,0
-
-
16,5

1,05
0,75
0,75
0,55
0,90
105,73
1045,0 -
-
18,0
1,10
0,80
0,80
0,60
Of 1.00
125,78
1245,0
-
-
20,0

1,20
0,90
0,90
0,65
1,10
153,99
1520,0
-
-
22,0
1,30
Of 1.00
Of 1.00
0,70
1,20
185,10
1830,0
253500
207500
23,5

1,50
1,05
1,05
0,80
1,30
215,94
2130,0
296000
242500
25,5
1,60
1,15
1,15
0,85
1,40
252,46
2495,0
346000
283500
27,0

1,70
1,20
1,20
0,90
1,50
283,79
2800,0
289000
318500
29,0
1,80
1,30
1,30
0,95
1,60
325,42
3215,0
446000
366000
31,0

1,90
1,40
1,40
Of 1.00
1,70
369,97
3655,0
507500
416000
33,0
Of 2.00
1,50
1,50
1,10
1,80
420,96
4155,0
577500
473000
34,5

2,10
1.55 V
1.55 V
1,15
1,90
461,07
4550,0
632500
518000
36,5
2,20
1,60
1,60
1,20
Of 2.00
503,09
4965,0
690000
565500
38,0
2,30
1,70
1,70
1,25
2,10
558,07
5510,0
765500
627500
39,5

2,40
1,80
1,80
1,30
2,20
615,95
6080,0
845000
692500
42,0
2,60
1,90
1,90
1,40
2,30
683,68
6750,0
938000
768500
43,0

2,70
1,90
1,90
1,40
2,40
717,18
7120,0
983500
806500
44,5
2,80
Of 2.00
Of 2.00
1,50
2,50
787,38
7770,0
1080000
885000
46,5
2,90
2,10
2,10
1,50
2,60
850,76
8400,0
1165000
956500
48,5

Of 3.00
2,20
2,20
1,60
2,70
927,12
9155,0
1270000
1040000
50,5
3,10
2,30
2,30
1,70
2,80
1006,85
9940,0
1380000
1130000
53,5
3,30
2,40
2,40
1,80
Of 3.00
1131,96
11150,0
1550000
1265000
56,0

3,40
2,50
2,50
1,90
3,10 1219,89
12050,0
1670000
1365000
58,5
3,60
2,60
2,60
Of 2.00
3,20
1314,56
13000,0
1800000
1470000
60,5

3,70
2,70
2,70
Of 2.05
3,40
1446,74
14250,0
1980000
1625000
63,0
3,80
2,80
2,80
2,10
3,50
1538,92
15200,0
2110000
1725000
65,0

3,90
2,90
2,90
2,15
3,60
1634,03
16100,0
2240000
1830000
68,0
4,10
Of 3.00
Of 3.00
2,25
3,80
1792,62
17700,0
2455000
2010000
72,0
4,30
3,20
3,20
2,40
Of 4.00
2008,28
19800,0
2755000
2255000



Continued

ГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)



Continued

ГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)


Continued

ГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)



Notes:

1. The ropes, breaking strength of which is given to the left of the bold line are made of wire without coating and galvanized. Ropes of galvanized wire groups W and coolant diameters and 58,5 72,0 mm marking groups 1370 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(140 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)), and 53,5 56,0 mm marking group 1470 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(150 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)), 34,5−56,0 mm marking groups 1570 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(160 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)), 34,5−44,5 mm marking group 1670 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(170 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)), 23,5−39,5 mm marking group 1770 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(180 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)), of 13.5−20.0 mm marking group 1960 N/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)(200 kgf/mmГОСТ 7668-80 Канат двойной свивки типа ЛК-РО конструкции 6х36(1+7+7/7+14)+1 о.с. Сортамент (с Изменениями N 1, 2)) are made by agreement between manufacturer and consumer.

The ropes, breaking strength of which is given to the right of the bold line are made of wire without coating. Allowed in coordination with the consumer manufacturing of ropes, galvanized wire.

2. The diameters of the ropes over 10mm rounded to whole numbers or to 0.5 mm.


2, 3. (Changed edition, Rev. N 1, 2, Amendment).

4. Technical requirements, acceptance rules, test methods, packaging, marking, transportation and storage GOST 3241−91.