Square bar made of stainless steel
|Grade||analogue||W. Nr.||Aisi Uns||En||Order|
|12X18H10T||EP2||1.4541||321||X12CrNiTi18-10||Buy from stock, view availability|
|08X18H10||EI825||1.4301||304||X5CrNi1810||Buy from stock, view availability|
|10X17H13M2||1.4401||316||X5CrNiMo17-12-2||Buy from stock, view availability|
|12X13||EJ1||1.4006||410||X12CrN13||Buy from stock, view availability|
|40X13||EJ4||1.4034||420||X46Cr13||Buy from stock, view availability|
|08X17||EI645||1.4016||430||X6Cr17||Buy from stock, view availability|
|12X17||X17||410||Buy from stock, view availability|
|20Х23Н18||EI417||1.4845||310S||X12CrNi25-21||Buy from stock, view availability|
Stainless square bar is used in industrial sector and civil-mechanical engineering. It is a semi-fabricate that is going to be processed into long products (for example into profiled metal-roll: beams, channel beams, skid bars).
Stainless blanket is cogged down by hot method on blooming-mill. Rolling mill cogs a product in one sitting up to 120 mm. There are needed 15−20 passes for final forming of product. At first, an ingot is heated up to 1200−1250°С. After this, it is put on blooming-mill. If necessary, the blanket is cut and horizontal and vertical rollers cog the blanket in sequence. After finishing of rolling, there are performed a grooving and final step of processing. Grooving can have high, extra and standard level of accuracy. Standard bar section made of stainless steel has a section up to 200 mm. If the section of product is bigger, it is marked as a special order. Final processing of stainless square bar can have skin-pass, speculum, brushed, or super-speculum surface. Standard length of final products usually constitutes 2000 mm. If there is a need, enterprises can make a cutting with another dimension. There can be also done an additional perforation of flat metal-roll and welding. Final step is packing in polyethylene protective film. Stainless products are stored under cover or in covered accommodation.
Percentage composition GOST 5632−72
|X12CrNiTi18−10||≤ 0,12||basis||9 — 11||≤ 2||≤ 0,8||≤ 0,8||17 — 19||≤ 0,035||≤ 0,02||≤ 0,3||0.2|
|X6CrNiTi18−10||≤ 0,08||basis||9 — 11||≤ 2||≤ 0,5||≤ 0,8||17 — 19||≤ 0,035||≤ 0,02||≤ 0,3||0.2|
|X5CrNiMo17−12−2||≤ 0,1||basis||2 — 3||12 — 14||≤ 2||≤ 0,8||16 — 18||≤ 0,035||≤ 0,02||≤ 0,3||0.3|
|X12CrN13||0. 09−0.15||basis||≤ 0,6||≤ 0,8||12 — 14||≤ 0,035||≤ 0,025||0.5|
|X46Cr13||0,35 — 0,45||basis||≤ 0,8||≤ 0,8||≤ 0,03||≤ 0,025||0.5|
|X6Cr17||≤ 0,12||basis||≤ 1||16 -18||≤ 0,04||≤ 0,03||≤ 1||0.5|
|X8Cr17||≤ 0,12||basis||≤ 0,8||16 -18||≤ 0,035||≤ 0,025||0.5|
|X12CrNi25−21||≤ 0,2||basis||17 -20||≤ 2||≤ 1||22 -25||≤ 0,035||≤ 0,02||0.3|
Would you like to buy goods by wholesale? «Auremo» stainless square bar supplier proposes to buy goods on favourable terms. A wide range of grades is presented in stock. They comply with GOST and International Standards of quality. Stainless square bar is always in stock. You can buy goods for affordable price from stainless square bar supplier. Buy stainless square bar right now! Stainless square bar price is privileged for wholesale buyers.
Buy at a bargain price
«Auremo» company proposes to buy goods on favourable terms. We offer to buy products from the special purpose stock. A delivery can be implemented in any city. A huge selection of products with different dimensions and surface quality is presented in stock. Our specialists will pack, complete, and mark your order. All production is certificated and commercially available. Stainless square bar price depends on order quantity and additional conditions of supply. The supplies are implemented within the shortest possible time. If you buy stainless square bar by wholesale, you will be given special discounts.