GOST 4034-63

• gost-4034-63.pdf (78.01 KiB)
  ГОСТ 4034-63

Nails GOST 4034−63 container is round. The design and dimensions (with Amendments No. 1, 2)

GOST 4034−63

Group В78

INTERSTATE STANDARD

TARE NAILS OF ROUND

The design and dimensions

Round box nails. Construction and dimensions

ISS 77.140.65
OKP 12 7100

Date of introduction 1964−07−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by the State Committee of standards, measures and measuring instruments of the USSR from 06.08.63 N 572

3. REPLACE GOST 4034−48

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

5. Limitation of actions taken by Protocol No. 5−94 of the Interstate Council for standardization, Metrology and certification (ICS 11−12−94)

6. EDITION (February 2009) with Amendments No. 1, 2 approved in November 1980, December 1987 (IUS 2−81, 4−88)

1. The design and dimensions of container round nails with flat heads shall be as specified in the hell.1 and in table.1.

Damn.1

Table 1

mm

The symbol tare nails with flat head, shaft diameter 2.5 mm and length of 50 mm:

P nails 2,5x50 GOST 4034−63

(Changed edition, Rev. N 1).

2. The design and dimensions of container round nails with tapered head should match those in hell.2 and in table.2.

The design and dimensions of container round nails with tapered head

Damn.2

Table 2

mm

The callout container nails with a conical head, a shank diameter of 2.5 mm and a length of 50 mm:

Nails 2,5x50 GOST 4034−63

(Changed edition, Rev. N 1).

3. Technical requirements for nails according to GOST 283.

4. Theoretical mass of nails specified in the application.

(Added, Rev. N 1).

APPLICATION (reference). Theoretical mass of nails

APP
Reference

APP. (Changed edition, Rev. N 1, 2).