Circle, wire, tube, sheet, strip of aluminum 5754
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| AMG3 | 5754 | AlMg3 | Buy from stock, view availability |
Advantages
Good weldability and high resistance to corrosion have brought semi-finished aluminum 5754 deserved popularity in the formation of lightweight construction. The alloy's main alloying element is magnesium, which provides the material with excellent machinability. Another advantage that has a European aluminum grade 5754 is its high specific strength. It is higher than that of brands 1050 and 3003.
Technical Characteristics
Aluminum grade 5754 contains up to 3.8% magnesium. It has good corrosion resistance, but is sensitive to high temperatures above 200-250 ° C (392-482 ° F), and stronger heating can lose technical performance. The technology for making rolled sheet metal. is subject to the requirements of EN 485-1,2,4; EN 515 and EN 573-3.
| Fe | Si | Mn | Cr | Ti | Al | Cu | Mg | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.5 | 0.5 - 0.8 | 0.3 - 0.6 | ≤0.05 | ≤0.1 | 93.8 - 96 | ≤0.1 | 3.2 - 3.8 | ≤0.2 | ≤0.1 |
Relevance
Sheet, tape is in high demand by manufacturers of road signs, anodized fittings, heat exchangers. Due to resistance to corrosion in fresh and sea water, such material is suitable for the manufacture of boat frames or ship superstructures.
Application of
Aluminum of this brand is widely used in the manufacture of small yachts, boats, household appliances, gas, electrical and heat exchanger fittings, refrigerator panels and the creation of architectural details. The most demanded aluminum of this aluminum grade is used in soft (annealed) condition and is called H111.
Supplier
Supplier Auremo offers rounds, wires, tubes, sheets, ribbons of European aluminum on favorable terms today. Large selection of semi-finished products in stock. Always available round, wire, tube, sheet, strip of aluminum 5754, the price - the best from the supplier. Sheet comes in thicknesses from 0.5 mm to 10 mm inclusive. The most popular are sheets with a width of 1200 mm - 1500 mm and a length of 3 - 4 meters. Buy today. Semi-finished products of any parameters are delivered to order. the price is the best in this segment of rolled products.
Buy at a reasonable price.
The supplier "Auremo" offers to buy European aluminum on the best conditions. A wide range of semi-finished nonferrous metal products is always in stock. The price depends on the order volume and additional delivery terms. Bulk purchases at substantial discounts. Buy a round, wire, tube, sheet, strip of aluminum 5754, or any other metal products, you can easily contact the nearest office. Book the service "Call Back". Availability of goods and prompt delivery are provided by representative offices located in Moscow, St. Petersburg, Eastern European cities.
