Rod, wire, tube, sheet, strip Jethete M152
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| S64152 | Buy from stock, view availability |
Jethete® M152
This alloy consists of nickel, chrome. This alloy covers with a red-brown oxide film under an influence of high temperature in air. Available forms of mill-products: rod, seamless and welded tube, wire, plate, sheet, connecting piece, flange, forging. A high wearing quality, an immunity to aggressive environment effect, and a heat resistance allow using Jethete® M152 alloy for welded chemical equipment. Unique operation factors give a possibility to use it for manufacturing heat-exchange equipment, thermal screen, details of heat-treatment furnaces, combustion chambers. Corrosion resistance makes it relevant in industrial chemistry.
Chemical composition of alloy
| P | Mn | C | S | Ni | Cr | Si | Mo | V | Co | Cu | Ti | N | Fe | Al | B |
| 0,0013 | 0,7 | 0,12 | 0,0013 | 2,5 | 16,8 | 0,18 | 1,8 | 0,33 | 0,03 |
Mechanical properties
| Ultimate stress limit | Flow limit | Elongation | Hardness HB | Cut-crossing |
| 1100−1300 MPa | 900 MPa | 8% | 321−388 | 50 mm |
This alloy has a good workability. It can satisfactory be taken to molding. However, it is disposed to a hammer hardening. That is why it must be cut at small speeds with a special tool. It differs with an excellent weldability by dint of well-balanced composition. Welding is done without further heat treating or previous heating.
Welding
| Type | Description |
| weldable without stint |
welding is done without further heat treating or previous heating |
| hardly weldable | in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, to do a heat treating (annealing) after welding |
| limitedly weldable | welding is possible at heating to 100−120°С and last heat treating |
Supplier
«Auremo» Jethete M152 alloy supplier delivers stainless metal-roll on the most favorable terms. Rod, pipe, bar Inconel 330 are always in stock. Jethete M152 alloy price depends on order quantity and additional conditions of supply. If you buy goods by wholesale, you will be given special discounts. An availability of products and efficiency of delivery are conditioned by a fact that we have offices in Moscow, St. Petersburg and cities of Central Europe.
Buy at a bargain price
«Auremo» company specializes in a supply of European special steels. All products are certificated. «Auremo» company is a profitable Jethete M152 alloy supplier in this segment of metal-roll. You can easily buy Jethete M152 alloy by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. Buy Jethete M152 alloy in a moment for an affordable Jethete M152 alloy price. We are waiting for your orders.
