A rod, a sheet, a casting made of titanium gost AT3
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| AT3 | Buy from stock, view availability |
Technical characteristics
| Description | Identification |
| A grade of titanium alloy: | AT3 |
| Alloy classification: | Titanium deformable alloy |
| Industrial usage of alloy: | Manufacture of semi-finished products (sheets, strips, foils, plates, bars, pipes, ingots, forgings, sections, stamping bars) by a deformation method |
Percentage composition of alloy according to GOST 19807 -91
| Al | N | H | Ti | Si | C | Fe | Cr | O | Residual elements |
| 2 — 3.5 | ≤0.05 | ≤0,008 | 94.65 — 97.1 | 0.2 — 0.4 | ≤0.1 | 0.2 — 0.5 | 0.2 — 0.5 | up to 0.15 | others 0,3 |
Alloying increases strength characteristics and corrosion resistance of titanium 2−3 times as much. One of the main alloying elements is aluminium. It is present in almost all types of titanium.
Mechanical characteristics of grade AT3 (temperature is 20°С)
| Range of sizes | Thickness | sв |
d5 |
y | KCU | Heat treatment |
| - | mm | MPa | % | % | kJ/m2 | - |
| Bar, GOST 26492−85 | ≤ 10 | 590 | 15 | 35 | 400 | Annealing |
| Plate, GOST 23755−79 | 11 — 60 | 590 | 8 | 12 | 450 | Condition of supply |
Welding of titanium mill-products is possible without pre-heating or further heat treatment.
Description of mechanical characteristics
| Description | Identification |
| Flow limit at permanent change of form (proportional limit) [MPa] | sT |
| Brinell hardness [MPa] | HB |
| Contraction ratio (%) | y |
| Short resistance to rupture [MPa] | sv |
| Percent elongation at fracture [ % ] | d5 |
| Impact hardness [ kJ/m2] | KCU |
Physical characteristics of titanium gost AT3
| Description | Identification |
| Temperature at which are obtained actual characteristics: | 20°С |
| Heat conduction coefficient t° 200 °C [1/ °С] | 10.5 |
| Density g/cm3 |
4.5 |
| Elasticity module of 1 sort Е [MPa] x 10-5 | 1.12 |
| Short-term strength limit sв [MPa] Sheet | 590 |
| Short-term strength limit sв [MPa] Plate | 590 |
| Specific electric resistance Оhm-mm2/m | 1.08 |
Weldability
| Identification | Description |
| weldable without imits | welding is done without final heat treating or previous heating; |
| limitedly weldable | welding is possible at heating to 100−120°С and last heat treating; |
| hardly weldable | in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, to do a heat treating (annealing) after welding; |
Advantages
Titanium and its alloys are not inferior to steel by strength, but they are twice lighter. They differ with heat resistance and low heat conduction. Advantages of titanium are very promising in technical fields that require high strength-to-density ratio, heat resistance in combination with high corrosion resistance. Food, chemical industries, aviation, rocket-building, shipbuilding, motor vehicle mechanical engineering cannot do without titanium. Extraordinary characteristics of this metal in the capacity of a structural material are of the utmost interest in spacecraft engineering.
Titanium gost AT3 alloy supplier
Where to buy titanium mill-products by wholesale? «Auremo» company proposes to buy titanium mill-products on favorable terms. There is a wide range of half-finished goods in stock. They comply with GOST 19807−91 and International Standards of quality. Titanium gost AT3 rod, sheet are always in stock. You can buy them for the best price from a supplier. Buy titanium gost AT3 alloy right now! Titanium gost AT3 alloy price is privileged for wholesale customers.
Buy at a bargain price
«Auremo» company proposes to buy goods on favorable terms. A wide range of goods for scaled-up fabrications is in stock. Rod, sheet of titanium gost AT3 are always in stock. A price is conditioned by technological details of production without including additional expenses. You can find a price-list, a catalog of production and all information about it on company’s web-site. Titanium gost AT3 alloy price depends on order quantity and additional conditions of supply. You can easily find us through the Internet. «Auremo» supplier offers to buy titanium mill-products by wholesale. «Auremo» company is a profitable titanium gost AT3 alloy supplier in this segment of mill-products. Buy titanium gost AT3 alloy in a moment. A quality complies with GOST 19807−91 and International Standards. There is an affordable price from a supplier. We are waiting for your orders.
