By visiting this site, you accept the use of cookies. More about our cookie policy.

Rod made of 32NKD alloy

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
32NKD EI630A Buy from stock, view availability

Characteristics of the alloy

Precision alloy of 32NKD grade with an average index of linear expansion thermal coefficient is intended to be jointed with glass С 72−4, mica, or ceramics. This is alloy with an average index of a linear expansion thermal coefficient (6,0−9,0)·10-6 deg-1 at a temperature range from -70 up to + 470 °C. Such a grade of alloy as 32NKD is not allowed to use from 01.01.1991 in modernizing appliances or equipment that is again manufactured. Melting point of alloy is 1450 °C.

Precision alloy is a metallic alloy, which possesses unique physical and mechanical characteristics (magnetic, elastic, heating, electrical etc.). Precision alloy has a rank of properties that characterize an accuracy of chemical composition, carefulness of manufacture and processing, an absence of various residual elements. Usually, an actual category contains highly-doped alloys. Precision alloys are manufactured on a basis of iron, nickel, copper, niobium, cobalt. This group is used in precision machine tool building, innovative technologies, laser technology, for manufacturing accurate electronic devices, household units, metrological and measuring gauges.

Welding:

Type Description
limitedly weldable — welding is possible at heating to 100−120°С and last heat treating
hardly weldable — in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, heat treating (annealing) after welding
weldable without stint — welding is done without further heat treating or previous heating

Percentage composition:

P S Ni Co Si C Fe Mn
≤0.015 ≤0.015 32.5 — 33.5 16.5 — 17.5 ≤ 0.3 ≤0.05 48.22 — 51 ≤ 0.4

Mechanical features of 32NKD at a temperature 20 °C.

Products Size KCU y d5 sT sv F.e. Heat treatment
- mm kJ/m2 % % MPa MPa - -
GOST 14 080−78 — hammer-hardened strip 930 - - - - - - -

Mechanical characteristics

Description Name
Short resistance to rupture [MPa] sv
Flow limit (proportional limit load) for permanent change of form [MPa] sT
percent elongation at fracture [ % ] d5
Contraction ratio [%] y
impact hardness [ kJ/m2] KCU
Brinell hardness [MPa] HB

Physical characteristics:

kg/m3 V/(m/degree) Ohm-m J/(kg/deg) MPa Degree 1/Deg

Physical characteristics

Description Identification
Modulus of elasticity of first genus [MPa] E
Required temperature for obtaining of actual features [Deg] T
Linear expansion thermal coefficient [1/degree] (range of temperatures 20°С) a
Electrical unit-area resistance [Ohm-m] R
Density of an actual material [kg/m3] r
Heating capacity of material (or coefficient of conductivity for heat) [V/(m/deg)] l
Specific heat of the material [J/(kg/deg)] (range of temperature 20°С) CC

Magnetic characteristics

Description Identification
Coercive field (not higher) [A/m] Hc
Magnetical inductive capacity (not higher) [mH/m] Umax
Specific loss (not higher) 50 hz of frequency, magnetic induction 1.0 Т[ B/kg ] P1.0/50
Magnetic T induction, magnetic field strength no less than 100, in magnetic field, [A/m] B100

Buy 32NKD rod, wire, pipe at a bargain price

Products that are made of 32NKD and which are presented in «Auremo» 32NKD rod, wire, pipe supplier comply with GOST and International Standards. This metal relates to a popular group of metal products due to its real cost and diversity of its types. A quality of metal products is guaranteed by rigorous technology compliance of manufacture. Buy 32NKD rod, wire, pipe for an affordable 32NKD rod, wire, pipe price. If a required type of product is absent or it is neccessary to make another variation of the product, 32NKD rod, wire, pipe supplier can manufacture it in off-standard sizes for individual order for the best 32NKD rod, wire, pipe price.