Wire, rod, bar made of X10CrAl24, aisi 446
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 15X25T | EI439 | 1.4762 | 446 | X10CrAl24 | Buy from stock, view availability |
Manufacture
Wire, rod, bar X10CrAl24, aisi 446 relate to stainless bar-section metal-roll. Composition of finished products complies with technical conditions and GOST 5632−72. There are contained: 24−27% of chrome, 0.8% of manganese, up to 1% of silicon, 0.15% of carbon, 0.5−0.9% of titanium and thousand parts of percent of sulfur and phosphorus. Manufacture of steel is done in open arc furnace. This guarantees a minimum quantity of unnecessary residual elements.
Percentage composition (GOST 5632−72)
| Fe | Si | C | Mn | P | Cr | Ti | S | Residual elements |
| Basis | ≤ 1 | ≤ 0,15 | ≤ 0,8 | ≤ 0,035 | 24 — 27 | 0,5 — 0,9 | ≤ 0,025 | ≤ 0,5 |
Processing
Plastic deformation is performed in temperature range of 1100 °C at the beginning and 800 °C at the end. According to a first pattern, there must be done a cooling in water, in oil, or in air. During a second pattern, a cooling is done with a help of water with further holding of products (4 — 4.5 hours). Welding is done by electric-arc method. Manual electric-arc welding requires an application of electrodes of grade OZL-35, OZL-25. Bar is hardened at a temperature of 1050−1150°С in air.
Classification
A rod is a metallic bar that has a circular cross section and length of 2−6 m. There can be tree types of manufacturing accuracy level: high, super, and standard. By method of heat processing, rod can be thermally processed, non-processed, hammer-hardened (exposed to rolling again and again). Wire, bar, rod can be made of single, random or multiple to single length.
Application
Wire, rod, bar X10CrAl24, aisi 446 can withstand thermal loads of 1000 °C for a long period of time without loss of strength characteristics. They are used in a manufacture of slot furnace rollers. They serve for fast firing of ceramic tiles, for flat household ceramics and other ceramic products. Traveling kiln grids are also made out of this wire. These rolled metal products are used in the form of stock material for manufacture of semi-fabricates of special purpose that are applied in industrial building. Bar X10CrAl24, aisi 446 is requested in mechanical engineering. It is also used in manufacture of spindles, bushes, pushers, trucks and other movable part of equipment. Wire is used in manufacture of retard grids, welding electrodes.
Supplier
«Auremo» X10CrAl24 bar, wire, rod supplier offers to buy stainless products by wholesale. A wide range of half-finished goods is presented in stock. The products comply with GOST and International Standards of quality. X10CrAl24 wire, rod, bar are always in stock. You can buy goods for the best price in X10CrAl24 bar, wire, rod supplier. We are waiting for your orders. Buy X10CrAl24 bar, wire, rod right now! X10CrAl24 bar, wire, rod price is privileged for wholesale buyers.
Buy at a bargain price
«Auremo» company offers to buy metal-roll made of heat-resistant chromium alloys for affordable price. A wide range of high-quality goods is presented in stock. X10CrAl24 bar, wire, rod depends on order quantity and additional conditions of supply. If you buy X10CrAl24 bar, wire, rod you will be given special discounts. Our offices located in Moscow, St. Petersburg and cities of Central Europe provide availability of products and efficiency of delivery. We invite you to a partnership.
