Rod, bar, wire, tube, sheet made of titanium gost VT23 alloy
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| BT23 | Buy from stock, view availability |
Technical characteristics
Titanium gost VT23 relates to alloys of a type Ti-Al-V-Mo-Cr-Fe. It is medium-doped α+β-alloy of martensitic class. It turns from β-format into α-martensitic form after thermohardening. This alloy differs from other alloys with high workable plasticity. This allows using rolling, expansion roll, drawing, forging, stamping, flanges and other operations associated with pressure treatment during manufacture.
Percentage composition according to IS 1 -90013 — 81
| C | Fe | Si | Cr | Mo | V | N | Ti | Al | Zr | O | H | Residual elements |
| ≤0.1 | 0.4 — 0.1 | ≤0,15 | 0.8 — 1.4 | 41.5 — 43.5 | 4 — 5 | ≤0.05 | 84.1 — 89.3 | 4 — 6.3 | ≤ 0.3 | ≤0,15 | ≤0.015 | ≤ 0.3 |
Welding and heat treatment
This titanium alloy is well welded. Strength of welded joints is much higher than in VT-14, VT-16 alloys. It should be noted that seams can maintain satisfactory plasticity at high strength. This alloy can be used at annealed or thermally hardened condition. Annealing at a temperature range of 750−800°C with further cooling in air is recommended for industrial processing. As a result, mill-products reach a maximum plasticity at a minimal strength. This alloy has only 30% of β-phase in an annealed condition. Hardening of mill-products with a help of thermohardening begins in a temperature range of 780−800 ° C. It passes into age-hardening at temperature of 450−550 ° C with 6−10 hours of holding. This provides to reach rupture strength of about 1500 MPa. Such mill-products can be hardened in water or in air.
Mechanical strength (t° 20° С)
| Range of sizes | sв |
d5 |
y | Heat treatment |
| - | MPa | % | % | - |
| Sheet of titanium gost VТ23 | 1450−1600 | 4−6 | Thermohardening and age-hardening | |
| Sheet of titanium gost VТ23 | 1100−1200 | 10−13 | Annealing |
sv — Short-time strength limit
d5 — Elongation on failure
Titanium gost VT23 alloy supplier
«Auremo» titanium gost VT23 alloy supplier proposes to buy titanium goods for the most favorable price. A wide choice of qualitative products that complies with GOST and International Standards of quality is presented in stock. An availability of products and efficiency of delivery are conditioned by a fact that our offices are in Moscow, St. Petersburg and cities of Central Europe. Titanium gost VT23 alloy price depends on order quantity and additional conditions of supply. If you buy titanium gost VT23 alloy by wholesale, you will be given special discounts.
Buy at a bargain price
All products are certificated. A quality is guaranteed by rigorous technology compliance of a manufacturing. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy titanium gost VT23 alloy by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. Titanium gost VT23 rod, bar, wire, tube, sheet are always in stock. There is the best titanium gost VT23 alloy price in this segment of mill-products. They comply with TC 1−90013 — 81 and International standards of quality.
