GOST 3092-80
GOST 3092−80 rope flat design 8х4х9 (0+9)+32 O. S. Assortment (with Amendments No. 1, 2)
GOST 3092−80
The Group Of 75
INTERSTATE STANDARD
ROPE FLAT DESIGN 8х4х9 (0+9)+32 o C.
Assortment
Flat rope construction 8х4х9 (0+9)+32 o C. Dimensions
ISS 77.140.65
OKP 12 5100, 12 5200
Date of introduction 1982−01−01
Resolution of the USSR State Committee for standards of 23 April 1980, N 1835 date of introduction is established 01.01.82
The expiration time limit is removed by the Resolution of Gosstandart from
REPLACE GOST 3092−69
Edition (may 2011) with Amendments No. 1, 2 approved in November 1986, November 1992 (IUS 2−87, 2−92)
1. This standard applies to flat steel ropes with thirty-two organic cores.
2. The ropes are classified by signs
for the purpose:
gruzolyudskie — GL,
freight — G;
mechanical properties grades: VC, V, 1;
by coating the surface of wire rope:
from wire without coating,
galvanized wire depending on the surface density of zinc: C, W, coolant;
by way of lay:
prosrochena — N;
for precision manufacturing:
normal
high — T;
according to the degree of balance:
ratowanie — R,
neritani.
Examples of symbols
Flat rope with a width of 139 mm, cargo destination, from wire without coating, of the brand, prescripcialis, Neradovsky, high precision, marking groups 1370 N/mm(140 kgf/mm
):
Rope 139-G-h-N-T-1370 GOST 3092−80
The same, of a width of 170 mm, cargo destination, marks I, galvanized by the group W, prescripcialis, Neradovsky, high precision, marking groups 1370 N/mm(140 kgf/mm
):
Rope 170-G-I-W-N-T-1370 GOST 3092−80
3. The size of ropes and basic parameters shall be as specified in the table.
_______________
* The text of the document matches the original. — Note the manufacturer’s database.
Note. The ropes, breaking strength of which is given to the left of the bold line are made of wire without coating and galvanized. The ropes of galvanized wire groups W coolant and width 233 mm marking group 1470 N/mm(150 kgf/mm
), 170−233 mm marking groups 1570 N/mm
(160 kgf/mm
), 170−217 mm marking group 1670 N/mm
(170 kgf/mm
), 124−186 mm marking group 1770 N/mm
(180 kgf/mm
) are made by agreement between manufacturer and consumer.
The ropes, breaking strength of which is given to the right of the bold line are made of wire without coating. Allowed in coordination with the consumer manufacturing of ropes, galvanized wire.
2, 3. (Changed edition, Rev. N 1, 2).
4. Technical requirements, acceptance rules, test methods, packaging, marking, transportation and storage GOST 3241−91.
