Target made of tungsten
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| VA | EHF | WP | EWP | Buy from stock, view availability |
Technical characteristics
Sputtering tungsten target has unique heat resistance (melting point of tungsten is +3422°C), high resistance to thermal creeping, high module of elasticity, minimum coefficient of thermal expansion in comparison to other metals, resistance to aggressive environment, corrosion resistance, strength, long operational life, reliability.
Physical properties
| Description | Identification |
| Temperature at which are obtained actual characteristics °С | 20°С |
| Coefficient of linear thermal expansion α [1/degree] | 43x10-6 |
| Density [g/cm3] | 19.3 |
| Ultimate tensile strength kg/mm2 | 35 |
| Specific heat at 20 °C [J/(kg/deg)] | 0.134 |
| Heat conductivity K [V/m*K] | 300.173 |
| Specific electric resistance R Оhm-mm2/m | 0.054 |
Tungsten target is not enough malleable and hard at standard temperatures. There are a few demerits:
— difficulty of tungsten obtaining in pure state;
— high volume weight (as gold has);
— brittleness at low temperature. Due to its unique properties, tungsten target can be processed (rolled, drawn, forged) only after heating up.
Manufacture and delivery
Tungsten targets are made in the form of flat disks, plates, and tubes of different configuration with tolerances and gauges according to customer’s drawings. There is used mechanical processing of powdered infiltrated copper billets for tungsten targets of complex shape. Upon completion of processing, copper is burned in vacuum. Powder billet is squeezed up to 90% of density. Tungsten tubes are made with a help of ultrasonic billet molding. Cost is defined by size complexity, configuration and additional requirements that are discussed when making an order. Material purity and rigorous compliance with technologies guarantee high strength and heat resistance. Tungsten targets are applied at filming process on glass of optical devices, solar batteries etc.
Tungsten targets and their grades:
W-PM
WA
CSWD
W-PPM
Maximum sizes of flat target:
Disk-shaped targets with a diameter of 630 mm;
Rectangular targets: 400x1550mm;
Standard sizes of target:
0.710"X 4.75″ X 44.000″
0.710"X 4.75″ X 44.000″ mm
812x127x8 mm
15x133x778 mm
18x248x300 mm
214x1600x11 mm
14x108x1462 mm
Diameter is 322 mm х δ
Diameter is 152XØ, 132.5xL750 mm
Diameter is 152xØ, 125xL800 mm
Diameter is 157XØ, 125L1900 mm
Diameter 168хØ, 144хL1000
Diameter 165, 5XØ, 125xL1650 mm
Buy at a bargain tungsten target price
«Auremo» tungsten target supplier sells rare and refractory metals. All tungsten targets presented in stock are certificated. Quality is guaranteed by rigorous technology compliance of a manufacture. Managers of «Auremo» tungsten target supplier are always ready to answer any questions and to give a knowledgeable assistance. A large assortment will not leave you without a choice. You can easily buy tungsten target for a reasonable tungsten target price. Just connect us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Buy tungsten target right now. Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements.
