Rod, wire, pipe made of cupronickel CuNi30Fe1Mn1, Cu19Ni
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| Mnzhmc30-1-1 | CuNi30Fe1Mn | Buy from stock, view availability | |||
| MN19 | CuNi19 | Buy from stock, view availability |
Technical characteristics of cupronickel
Cupronickel relates to a group of copper-nickel alloys. Two types of metal relate to this group of European alloys: Cu19Ni and CuNi30Fe1Mn1. They are alloyed with ferrum and manganese. Semi-fabricates that can be manufactured of these European alloys: pipe, rod, wire, sheet.
CuNi30Fe1Mn1 is copper-nickel alloy, GOST 492- — 2006. Chemical composition of cupronickel CuNi30Fe1Mn1 in percentage: Ni+Co (29−33%), Fe (0.5−1%), C (up to 0.05%), Si (up to 0.15%), Mn (0.5−1%), S (up to 0.01%), P (up to 0.01%), Cu (64.4−70%), Pb (up to 0.05%), Zn (0.5%), other elements (0,6%). Cu is a basis of this metal.
| Cu | Ni+Co | Fe | Mn | Zn | Si | Pb | C | S | P | Residual elements |
| 64,4−70 | 29−33 | 0,5−1 | 0,5−1 | ≤0,5 | ≤0,15 | ≤0.05 | ≤0.05 | ≤0,01 | ≤0,01 | ≤ 0,6 |
This alloy is used in instrument engineering, consumers' sector for manufacture of condenser tubes, lub oil cooler, parts of conditioners. This metal has good workability, resistance to corrosion and erosion. It can be easily exposed to welding.
Casting-processing properties of CuNi30Fe1Mn1
1) Melting point of alloy is +1230 °C;
2) Hot working is done at a temperature of 860 — 950 °C.
3) Annealing is done at a temperature of 750 — 810 °C.
Mechanical properties of CuNi30Fe1Mn1
Hardness: metal is hard HB 10 -1 = 98 MPa.
Cupronickel Cu19Ni
This is copper-nickel alloy (GOST — 492- 2006). It is used for manufacturing cladding elements of medical instruments and details of high-accurate equipment. This alloy is baldy exposed to deformation in cold condition. It is characterized by good weldability and high corrosive resistance.
Chemical composition of metal in percentage: Ni+Co (18−20%), Fe (up to 0.5%), С (up to 0,05), Si (up to 0.15%), Mn (up to 0.3%), S (up to 0.01%), P (up to 0.1%), Cu (78.5−82%), As (up to 0.01%), Pb (up to 0.005%), Mg (up to 0.05%), Zn (up to 0.3%), Sb (up to 0.005%), Bi (up to 0.002%), residual elements (1,5%).
| Cu | Ni+Co | Fe | Mn | Zn | Si | Pb | C | S | P | As | Sb | Bi | Residual elements |
| 78,5−82 | 18−20 | 0,5−1 | ≤0,5 | ≤ 0,3 | ≤0,15 | ≤0,005 | ≤0.05 | ≤0,01 | ≤ 0,1 | ≤0,01 | ≤0,005 | ≤0,002 | ≤ 1,5 |
Casting-processing properties of Cu19Ni
1) Melting point of metal is +1190 °C;
2) Temperature of hot working is 900 — 1030 °C
3) Annealing temperature of material is 600 — 780 °C.
Mechanical properties
Hardness: soft metal HB 10 -1 = 69 MPa.
Hardness: hard metal HB 10 -1 = 117 MPa.
CuNi30Fe1Mn1, Cu19Ni rod, wire supplier
«Auremo» company offers to buy cupronickel of grades CuNi30Fe1Mn1, Cu19Ni for affordable price. CuNi30Fe1Mn1, Cu19Ni rod, wire price forms according to international cost of metal-roll without including other expenses. If you buy CuAl9Fe4Ni4Mn1 sheet, strip wholesale, you will be given special discounts. Supplies are delivered directly from stock. It gives a vivid choice of products for customers and significant saving in storages and premises. Availability of products and efficiency of delivery are conditioned by the fact that we have our offices in Moscow, St. Petersburg and cities of Central Europe. We invite you to a partnership. Buy CuNi30Fe1Mn1, Cu19Ni rod, wire in a moment.
Buy at a bargain price
Huge range of products is presented in stock of «Auremo» CuNi30Fe1Mn1, Cu19Ni rod, wire supplier. All products are certificated. A quality is guaranteed by rigorous technology compliance of a manufacture. You can easily buy CuNi30Fe1Mn1, Cu19Ni rod, wire for reasonable price. Just connect us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are noted in section «Contacts». Order a service «Call-back». Our managers are always ready to lend a knowledgeable assistance. CuNi30Fe1Mn1, Cu19Ni rod, wire are always in stock. CuNi30Fe1Mn1, Cu19Ni rod, wire price is the best in this segment of mill-products. If a required type of product is absent, we can manufacture semi-fabricates in off-standard sizes by individual order.
