Strip, sheet made of HN60WT
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| XH60VT | VZh98 | Buy from stock, view availability | |||
| XH60VT | EI868 | Buy from stock, view availability | |||
| KhN60VT-p | EI868 | Buy from stock, view availability |
HN60WT sheet, strip supplier
«Auremo» supplier offers to buy HN60WT sheet, strip by wholesale. There is a wide range of half-finished goods in stock. They comply with GOST and International quality Standards. Sheet, strip HN60WT are always in stock. You can buy them for an affordable price from a supplier. Buy these goods right now! HN60WT sheet, strip price is privileged for wholesale customers.
Relevance
Modern industrial equipment is often forced to work in the hardest conditions. It is exposed to influences of aggressive gasses, temperatures, solutions. They can resist significant mechanical loads. The sheets made of an actual stainless alloy can be exploited for a long time under loads and in aggressive environment at a working temperature <1050ºС.
Percentage composition
| Ni | Cr | Fe | W | Ti | Mn | Si | Al | Ca | C | S | P |
| 59- 63.2 | 24−26.5 | ≤4 | 13−16 | 0.3−0.7 | ≤0,5 | ≤0,8 | ≤0,5 | ≤0,05 | ≤0,1 | ≤0,013 | ≤0,013 |
Advantages
It has a huge sizes range of manufactured sheets. Sheet surface does not oxidize at durable exploitation or at a high temperature. Lineal expansion coefficient of such sheet is13,7 (1/deg. K) and specific mass is 8,16g/cm³. Its mechanical properties vary according to a working temperature. Bending strength constitutes 60 — 520 N/sk.mm in a range of 20 — 1000ºС. Heat conduction coefficient is 16,9 — 13,4 V/(m•deg. K). Steel has a high weldability. This allows making the most complicated constructions without use of special equipment and without additional heat treatment at the end of welding.
Thermohardening
Sheet should be thermohardened at a temperature of 1200ºС with further cooling in water or in the air if there are some additional requirements to constructions. Such heat treatment conduces tonormalization of inherent stress in alloy and to increasing of strength characteristics of details.
| Dimension | sв MPa |
sT MPa |
d5% |
y % | Thermohardening in air |
| Cold-rolled sheet | 750 | 40 | 52 | 1200o C | |
| Strip | 700 | 30 | 1150 — 1170o C |
Application
Sheet made of this alloy finds wide and various applications due to corrosive resistance, high strength, heat-resistance. There are a lot of goods that can be made of this alloy: sheet details, pressure relief pipes of high-temperature installations. It is also used in petrochemical mechanical engineering, in manufacture of ammonia. Such sheets are widely used for manufacturing constructions, details that are intended to have a large mechanical assurance coefficient and be durably and reliably exploited at a temperature of <1050ºС. High workability allows using all modern techniques of metal working: grinding, cutting, polishing, and any types of welding.
Buy at a bargain price
«Auremo» is a supplier of heat-resisting mill-products to countries of Eastern and Central Europe. An experience of our company allows you easily buy products. A quality complies with GOST (all-Union State Standards) and International Standards. A wide selection of products is presented in catalog. HN60WT strip, sheet are always in stock. Their price depends on order quantity and additional conditions of supply. HN60WT sheet, strip price is privileged for wholesale customers. We are working with experienced managers who can quickly help to buy products by wholesale. We have the best price-quality ratio. We invite you to a partnership. Buy HN60WT sheet, strip right now. There is an affordable price from HN60WT sheet, strip supplier.
