By visiting this site, you accept the use of cookies. More about our cookie policy.

Welded wire 07X19N10b, Sv-07X19N10B, aisi 347

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
07X19N10B H-64 347 Buy from stock, view availability

Relevance

Sv-07h19N10b (Sv-07h19N10b-e) welding wire is produced according to RD 03-613-03, GOST 2246-70 and technical specifications. 1220-005-84 823 540-2010. This wire is used for welding of corrosion-resistant chromium-nickel steel of 08X18H12B, 08X18H10T, 08X18H12T and analogous types, which operate in aggressive conditions if the metal weld is not subject to stringent requirements for resistance to intergranular corrosion. This wire is also used for welding critical structures made of austenitic steels 12X18N12T, X16N13B, X20N12T-L, 12X18N9T and similar types at working temperatures of 570-650°C under high pressure. Sv-07Cr19Ni10b welding wire is used for surfacing (welding), as well as for production of different types of electrodes (OZL-7, TsN-12M, TsT-15, TsL-11).

Percentage composition (GOST 2246-70)
C Si Mn Ni S P Cr Nb
0.05 - 0.09 ≤ 0.7 1.5 - 2 9 - 10.5 ≤ 0.018 ≤ 0.025 18.5 - 20.5 1.2 - 1.5

In the wire, the components of the ferrite phase are regulated by agreement.

Supply

In coils of 85-100 kg, metal frame coil K415, K300, plastic coils D200, 300. Wire diameters: 0.8mm; 1.2mm; 1mm; 1.6mm, 2mm and 3mm (custom sizes are possible).

Mechanical characteristics

Tensile strength of high-alloyed, alloyed wire fully complies with all standards.

Diameter, in millimeters Breaking strength ofelectrodes, in kgf/mm2 (MPa), Tensile strength at breakage, in kgf/mm2 (MPa) of the wire for cladding
Sv. 2.0 637-931 (65-95) 686-1029 (70-105)
2,0 686-980 (70-100) 784-1176 (80-120)
1,6 686-980 (70-100) 882-1274 (90-130)
0,8-1,5 - 882-1323 (90-135)

Limit deviations, relative to the wire diameter are as follows:

Wire. Diameter, in millimeters cladding (welding) of cladding (welding) to
0,8 -0,07
1,2-1,5 - -0,09
4,0; 5,0; 6,0 -0,12 -0,16
1,6; 2,0 -0,06 -0,12
2,5; 3,0 -0,09 -0,12

Position during welding

N45, C1, D, N1, 2, P1, 2.

Welding process characteristics

Hardfacing of metal with welding wire is carried out in argon (inert gas). This improves the quality of formation of filling, root, facing layers of the weld and also stabilizes the burning of the arc.

Mechanical characteristics of the deposited metal (submerged arc welding)

Welding wire brand Tensile strength σ B, in MPa Elongation relative, in % Tensile strength, in σ T, MPa Impact toughness, in J/cm2 KCU
Св-07Х19Н10Б 620,5 34 389,8 112,5 - 122,4

The weld metal is not prone to intergranular corrosion.

Buy, bargain price

Supplier "Auremo" offers to buy welding wire wholesale or retail. The wide use of this welding wire is due to its high quality and affordable price. The absolute control of all stages of the technological process allows the company "Auremo" to supply high quality metal products. Buy welding wire 07Х19Н10б, Sv-07Х19Н10Б, aisi 347 today. The introduction of modern technology makes it possible in addition to a wide basic range of metal products to take orders for custom-made products of non-standard parameters. We have the best price-quality ratio.