By visiting this site, you accept the use of cookies. More about our cookie policy.

Sheet, strip, foil 20X13, aisi 420, ЭЖ2

Sheet, strip (foil)

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
20Х13 EJ2 1.4021 420 X20Cr13 Buy from stock, view availability

Supply

Supplier «Auremo» offers to buy a sheet, tape, foil 20X13, aisi 420, ЭЖ2 on favorable terms. In stock always in stock a large assortment of the highest quality. The price depends on order volume and additional conditions of delivery. When wholesale purchases enjoy significant discounts. Product availability and prompt delivery ensure that representative offices located in Moscow, Saint-Petersburg, the cities of Eastern Europe. Mark 20X13 — is heat-resistant stainless steel alloy of the martensitic class. Used lightly in production of parts that operate at temperatures of 900−1000°C. the composition includes chromium, 12−14% Nickel, manganese and silicon at 0.6%, carbon 0,16 — 0,25%, thousandths of a percent of sulfur and phosphorus. The balance is iron.

The percentage composition of (GOST 5632−72)

Alloy Si C Mn P Cr Ni S Fe
20X13 ≤0,6 0,16−0,25 ≤0,6 ≤0,035 12−14 0,6 ≤0,025 Basis

Production

Plastic deformation is carried out in the temperature range from 1100 °C to 900 °C. the Finished rolled steel in sheet and strip 20X13 cooled in air. Hot rolled flat products (4−160 mm) is made according to the following GOST: 19 903−74 and 1577−93. Thin sheets (0.5 to 3.9 mm) produced hot-rolled method (GOST 16 and 19 903−74 523−89). Thin hot-rolled sheet is heat-treated method, and its surface is netravlenoy and etched. The standard width of the steel sheet is 710−1800 mm, thickness 0.5 — 2.5 mm.

Marking

Sheet metal can be: N — normal, D — deep, HS — very deep drawing. The designation H. P. — means the cold forming, IT is General purpose for painting (PC, a trained).

Use

Sheet and strip stamps 20X13 have the widest scope of products high temperature installations that are operated in mechanical engineering and petrochemical industries. These dumplings are indispensable in the production of discs, flat springs, fasteners, capable of operating over a wide temperature range. They are used for parts of steam generators, pumps, cracking plants. This steel is widely used in petroleum, chemical industry, medical and food industries, as well as in the creation of architectural decorative elements.

Corrugated sheet and expanded metal is indispensable in the form of a non-slip coating for through-bridges, stairs, service platforms. Such designs are required at facilities petrochemical oil, gas industry, power engineering, shipbuilding and construction.

To buy, best price

When selecting stainless steel alloys it is necessary to consider a number of factors are decisive individual tests for corrosion resistance with temperature, the load in contact with the process media. Among similar products of «Auremo» the greatest demand is for tape, sheet and ribbon 20X13 Constant stock and the most affordable prices make it easy to buy these products. When wholesale purchases are offered preferential discounts. We invite you to partnership.