Wires, rods and bars made of steels Inconel 600, 601
Equivalent
Grade | analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
XN60YU | EI559A | 2.4816 | N06600 | NiCr15Fe | Buy from stock, view availability |
XN60YU | EI559A | 2.4851 | N06601 | NiCr23Fe15 | Buy from stock, view availability |
Technical characteristics
Inconel 600 ® represents a nickel-chrome alloy that characterizes by a high plasticity and resistance in an aggressive environment at high temperatures. The main special aspect of this grade is its generality. Alloy is widely used in industries due to perfect mechanical characteristics and good workability at hot and cold-working. Marketing general names of alloy: Nickelvac ® 600, Ferrochronin ® 600, Werkstoff Nr.2.4816. An actual alloy is a standard material that possesses a high thermal and corrosive resistance. It also has a great strength and it can satisfactory be taken to a cold deformation. An alloy may be shored up and thermo-hardened. It is used as a backing plate for furnace elements during heat treatment of chutes, baskets. Mill-products are represented with further types: rod, welded, seamless tube, wire, plate, sheet, flange, connecting piece, forging.
Processing
This alloy has a high plasticity. It can satisfactory be taken to molding. But it is disposed to a hammering harden and that is why it must be cut at small speeds with a special tool. A welding is possible only after previous heating details to 100−120°C with further annealing.
Welding:
Type | Description |
limitedly weldable | welding is possible at heating to 100−120°С and last heat treating |
hardly weldable | in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, heat treating (annealing) after welding |
weldable without stint | welding is done without further heat treating or previous heating |
Supplier
«Auremo» company proposes to buy goods on the most favorable terms. There is a wide range of goods of a high quality in stock. If you buy products by wholesale, you will be given special discounts. Inconel 600, 601 wire, rod, bar price depends on order quantity and additional conditions of supply. An availability of products and efficiency of delivery are conditioned by a fact that there are offices in Moscow, St. Petersburg and cities of Central Europe.
Chemical composition of alloy:
Ni | C | Si | S | P | Cr | Cu | Mo | Mn | Co | Ti | Cb+Ta | Fe | Al |
The basis no less than 72,0 | 0.15 | 0.5 | 0.015 | 14−17 | 0.5 | 1.0 | 6,0−10.0 |
Sheet has a thickness 0.5 — 4 mm. Rod is made in a form of forging with a diameter of not more than 230 mm. The bigger sizes can be made to order. A coiled material is made in large-format sizes. Its wideness can constitute up to 610 mm and a widths of a plate is up to 75 mm. Seamless tube can be rolled to a diameter not more than 200 mm. Huge diameters can be made to order in a form of welded tube. All products (with a welding seam) are exposed to a method with the tight tolerances of nondestructive control. Practically, pipes can be manufactured of any diameter and an extent of allowance does not depend on a size of order.
Buy Inconel at a bargain price
«Auremo» supplier is a recognized expert on a market of special steels. Thanks to offices in Eastern Europe, we are able to make a prompt cooperation with business partners. You can easily buy a wire Inconel 600, 601 by wholesale. Experience of our company allows you buy Inconel 600, 601 wire, rod, bar in any amount. «Auremo» company is a reliable Inconel 600, 601 wire, rod, bar supplier of special steels that invites all the wishing to a partnership. We have the best price-quality ratio. Inconel 600, 601 wire, rod, bar price is privileged for wholesale customers. All products are certificated. A delivery service will supply your order in the shortest possible time. Buy Inconel 600, 601 wire, rod, bar right now! There is an affordable price from Inconel 600, 601 wire, rod, bar supplier.