Wire 36NHTJU5M
Technical characteristics
Precision alloy of grade Elinvar +5Mo relates to steels with given level of elasticity. It is used in elastic detector elements and operate at temperatures up to 350 °C. Alloy possesses unique physical and mechanical characteristics (magnetic, elastic, heating, electric etc.) Precision alloys relate to high alloys and are manufactured on a basis of iron, nickel, copper, niobium, cobalt. They are characterized by an accuracy of chemical composition, a preciseness of manufacture, processing, and a minimal existence of residual elements.
Percentage composition of Elinvar +5Mo:
| Ni |
S |
Ti |
Mo |
Cr |
Al |
C |
Fe |
Mn |
P |
residual elements |
| 35 — 37 |
to 0.02 |
2.7 — 3.2 |
4 — 6 |
12.5 — 13.5 |
1 — 1.3 |
≤0.05 |
37.01 — 43.7 |
0.8 — 1.2 |
≤0,02 |
≤0,1 |
Physical features:
| t° |
1/t° |
g/cm3 |
J/(kg/Deg) |
V/(m/Deg) |
MPa |
Ohm-m |
| |
a 10 6 |
8,2 |
1,42 |
20 |
420 |
R 10 9 |
Physical characteristics
| Description |
Identification |
| Modulus of elasticity of first genus [MPa] |
E |
| Heating capacity of material (or coefficient of conductivity for heat) [V/(m/Deg)] |
l |
| Required temperature for obtaining of actual features, [Degree] |
T |
| Linear expansion thermal coefficient [1/deg] (range of temperatures 20°С) |
a |
| Electrical unit-area resistance [Ohm-m] |
R |
| Density of an actual material, [kg/m3] |
r |
| Specific heat of a material [J/(kg/Deg)] (range of temperature 20°С) |
C |
Magnetic characteristics
| Description |
Identification |
| Coercive field (not higher) [A/m] |
Hc |
| Magnetical inductive capacity (not higher) [mH/m] |
Umax |
| Specific loss (not higher) 50 hz of frequency, magnetic induction 1.0 Т[ B/kg ] |
P1.0/50 |
| Magnetic T induction, magnetic field strength no less than 100, in magnetic field, [A/m] |
B100 |
Mechanical characteristics
| Description |
Identification |
| Short resistance to rupture [MPa] |
sv |
| Flow limit (proportional limit load) for permanent change of form [MPa] |
sT |
| Percent elongation at fracture [ % ] |
d5 |
| Contraction ratio |
y |
| Impact hardness [ kJ/m2] |
KCU |
| Brinell hardness [MPa] |
HB |
Elinvar +5Mo wire, rod, pipe supplier
«Auremo» Elinvar +5Mo wire, rod, pipe supplier delivers precision alloys on favorable terms. There is a wide range of goods of a high quality in stock. Elinvar +5Mo wire, rod, pipe price depends on order quantity and additional conditions of supply. If you buy products by wholesale, you will be given special discounts. Buy Elinvar +5Mo wire, rod, pipe right now! An availability of products and efficiency of delivery are conditioned by a fact that we have offices in Moscow, St. Petersburg and cities of Central Europe.
Buy at a bargain price
All products are certificated. A quality is guaranteed by rigorous technology compliance of manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. A large assortment will not leave you without a choice. You can easily buy Elinvar +5Mo wire, rod, pipe. Just connect us with a convenient way to you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. Elinvar +5Mo wire, rod, pipe price is the best today!
