GOST 4032-63
GOST 4032−63 finishing Nails round. The design and dimensions (with Amendments No. 1, 2)
GOST 4032−63
Group В78
INTERSTATE STANDARD
FINISHING NAILS ROUND
The design and dimensions
Round finishing nails. Construction and dimensions
ISS 77.140.65
OKP 12 7100
Date of introduction 1964−07−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by the State Committee of standards, measures and measuring instruments of the USSR from
3. REPLACE GOST 4032−48
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 283−75 |
2 |
5. Limitation of actions taken by Protocol No. 5−94 of the Interstate Council for standardization, Metrology and certification (ICS 11−12−94)
6. EDITION (February 2009) with Amendments No. 1, 2 approved in November 1980, December 1987 (IUS 2−81, 4−88)
1. Design and dimensions round finishing nails shall be as specified in the drawing and in the table.
mm
The diameter of the rod |
The length of a nail |
Head diameter |
| 0,8 |
10 | 1,4 |
| 1,0 |
16 | 1,8 |
| 1,2 | 20 |
2,2 |
| 1,6 | 25 |
2,8 |
| 32 | ||
| 2,0 |
40 | 3,6 |
The symbol of the finishing nails with a shank diameter of 1.2 mm and a length of 20 mm:
Nails 1,2x20 GOST 4032−63
(Changed edition, Rev. N 1).
2. Technical requirements for nails according to GOST 283.
3. Theoretical mass of nails specified in the application.
(Added, Rev. N 1).
APPLICATION (reference). Theoretical mass of nails
APP
Reference
The size of the nails |
The mass of 1000 nails, kg |
| 0,8x10 |
0,027 |
| 1,0х16 |
Of 0.085 |
| 1,2x20 |
0,167 |
| 1,6x25 |
0,360 |
| 1,6х32 |
0,471 |
| 2,0h40 |
0,935 |
APP. (Changed edition, Rev. N 1, 2).
