GOST 4030-63

• gost-4030-63.pdf (45.74 KiB)
  ГОСТ 4030-63

GOST 4030−63 roofing Nails. The design and dimensions (with Amendments No. 1, 2)

GOST 4030−63
Group В78

INTERSTATE STANDARD

ROOFING NAILS

The design and dimensions

Roofing nails. Construction and dimensions

ISS 77.140.65
OKP 12 7100

Date of introduction 1964−07−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by the State Committee of standards, measures and measuring instruments of the USSR from 06.08.63 N 569

3. REPLACE GOST 4030−48

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

5. Limitation of actions taken by Protocol No. 5−94 of the Interstate Council for standardization, Metrology and certification (ICS 11−12−94)

6. EDITION (February 2009) with Amendments No. 1, 2 approved in November 1980, December 1987 (IUS 2−81, 4−88)

1. The design and size of roofing nails shall be as specified in the drawing.

mm;

The symbol of the roofing nails with a shank diameter of 3.5 mm and a length of 40 mm:

Nail 3,5x40 GOST 4030−63

(Changed edition, Rev. N 1).

2. Technical requirements for nails according to GOST 283.

3. Theoretical weight of 1000 pieces nail size (3,5x40) mm equal to 2.67 kg.

(Changed edition, Rev. N 1, 2).

The electronic text of the document
prepared by JSC «Code» and checked by:
the official publication of the
Wire nails: Sat. Standards. -
M.: STANDARTINFORM, 2009