Rod, bar, wire made of Ti-10V-2Fe-3Al
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| R56410 | Ti-10V-2Fe-3Al | Buy from stock, view availability |
Technical characteristics
Ti-10V-2Fe-3Al beta-alloy is much more complex, in comparison with other titanium alloys. It differs with high strength; it may be additionally hardened by heat treatment. Temperature of hardening must not be lower than 1540 ° C. Mill-products are manufactured in accordance with standards of ASTM and specifications of AMS 4983, AMS 4984. It is used in a wide range of static or dynamic loads. High strength and high impact hardness are combined in European titanium alloy Ti-10V-2Fe-3Al. Mill-products: pipe, flat, long products, forgings.
Percentage composition according to ASTM standard
| Ti | V | Al | Fe | O | C | N | H | Y | Residual elements |
| Basis | 9−11 | 2,6−3,4 | 2.3−2.6 | ≤ 0,13 | ≤ 0,5 | ≤ 0,5 | ≤ 0,15 | ≤ 0,05 | ≤ 0,03 |
European titanium alloy Ti 10−2-3 possesses better workability during hot working pressure than most titanium alloys. Strength properties can be substantially increased by cold deformation. Hardening is achieved by cold deformation. It is particularly high when a degree of deformation is up to 40%. In this case, hardening has inconspicuous strengthening effect.
Welding
Weldability of this alloy is comparable to Ti — 6al-4v. Electron beam with the same parameters as for Ti — 6al-4v alloy can be used there. Though, seam strength is comparable to base metal. Oxygen or nitrogen hungry metal requires inert gas protection not only on a weld zone, but on a reverse side of a seam, and on all those zones of metal that are heated to 400 degrees as well. The most common method of welding is either automatic or hand arc melting welding under argon protection. There is used a non-consumable tungsten electrode (lanthanated tungsten) without filler material or with filler wire of commercially pure titanium. Nowadays, there is also used a new method by Gurevich of consumable electrode. It is a pulse-arc welding, which is based on a management of magnetic or dynamic processes in arc.
Application
Bar section Ti 10−2-3 is used in shipbuilding, construction of an air-frame: pylons, hinges, axles, parts of landing gear, helicopter components, cars.
Supplier
«Auremo» Ti-10V-2Fe-3Al bar, wire supplier proposes to buy goods for the most favorable price. There is a wide range of goods of a high quality in stock. A quality complies with International Standards. You can easily buy Ti-10V-2Fe-3Al bar, wire in supplier. Ti-10V-2Fe-3Al bar, wire price depends on order quantity and additional conditions of supply. Quality complies with GOST (all-Union State Standards) and International Standards. If you buy Ti-10V-2Fe-3Al bar, wire by wholesale, you will be given special discounts. Availability of products and efficiency of delivery are conditioned by a fact that our offices are located in Moscow, St. Petersburg and cities of Central Europe.
Buy at a bargain price
You have to take into account a range of factors when choosing titanium alloys. A wide selection of mill-products for order in advance is presented in stock. «Auremo» company offers to buy titanium products. Ti-10V-2Fe-3Al bar, wire price is conditioned by technological details of production without including additional expenses. Our specialists are always ready to help with selecting required products, which determine capability and reliability of future equipment. We guarantee a high quality of products and fast delivery. You can find all information about goods on company’s web-site. We offer discounts from Ti-10V-2Fe-3Al bar, wire supplier for regular customers.
