Duralumin sheet
Equivalent
Grade | analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
ВД1 | 1105 | Buy from stock, view availability | |||
Д16 | 1160 | 3.1355 | AA2024 | AlCuMg2 | Buy from stock, view availability |
Production
Duralumin sheet produced according to GOST 21 631−76 from D16 alloy with the chemical composition normalized GOST 4784−74 or VD1 (chemical composition of GOST 1131−76). Precision manufacturing is normal, the quality of surface finish standard. GOST 24 231−80 standardized sampling for chemical composition control.
The percentage composition of the alloy VD 1
Fe | Al | Ni | Mn | Cu | Zn | Mg | Si | Ti | Impurities |
---|---|---|---|---|---|---|---|---|---|
≤1 | 90−97,3 | ≤0,2 | 0,3−0,8 | 2−5 | ≤0,7 | 0,4−1,6 | ≤1 | ≤0,2 | ≤0,2 |
The percentage composition of the alloy D 16
Fe | Al | Cr | Mn | Cu | Zn | Mg | Si | Ti+Zr | Impurities |
---|---|---|---|---|---|---|---|---|---|
≤0,5 | 91−94,7 | ≤0,1 | 0,3−0,9 | 3,8−4,9 | ≤0,25 | 1,2−1,8 | ≤0,5 | ≤0,2 | ≤0,15 |
Marking
1. Д16АМ and ВД1АМ — annealed sheets with normal plating.
2. VD1 and D16 — leaves replacerange, without heat treatment.
3. Д16АТ and ВД1АТ — hardened and naturally aged with normal plating.
4. D16T — hardened and naturally aged sheets, replacerange.
5. ВД1АН and ВД1АН2 — cold-worked and polunagartovannye with normal plating.
6. Д16БТ and Д16УТ — naturally aged and hardened with technological or thickened plating.
7. ВД1НР — refined and full hard sheet duralumin.
After quenching the microstructure of the products should not have signs of burnout. After heat treatment they are being tested.
Application
Leaves D16 have high plasticity, corrosion resistance perfectly processed by cutting, have satisfactory weldability, strength. They are used as fragments of shells river, sea vessels or aircraft. Often used for decoration of interiors. The VD1 alloy also has high strength and is well welded by spot welding. Used for covering trucks, aircraft fuselage, manufacturing of building structures.
Duralumin sheet General purpose
No. | Mark | UNIT | THICKNESS, mm | CUTTING, mm | PRICE |
---|---|---|---|---|---|
1. | D16 | pounds | 0,5 — 10 | 1200x4000 1200x3000 1500x3000 1500x4000 |
negotiable |
2. | Д16АМ | pounds | 0,5 — 10 | The same | negotiable |
3. | D16T | pounds | 0,5 — 10 | The same | negotiable |
4. | Д16УТ, Д16АТ Д16БТ |
pounds | 0,5 — 10 | 1200x4000 1200x3000 1500x3000 1500x4000 |
negotiable |
5. | ВД1АН2, VD1, ВД1АМ, ВД1АТ |
pounds | 0,5 — 8 | The same | negotiable |
Supplier
Supplier"Auremo" offers to buy duralumin sheet, price today best. The warehouse contains a large selection of high quality products. Compliance with GOST and international standards. Product availability and prompt delivery ensure that representative offices located in the cities of Eastern Europe. You can always buy duralumin sheet, the price depends on order volume and additional conditions of delivery. On wholesale purchase price — reduced.
To buy, best price
Products from «Auremo» is certified. Always in the presence of duralumin sheet, price is the best in this segment of the rental. Our managers are ready to provide expert assistance on the best choice. Buy duralumin sheet is easy by contacting the nearest office. Order the service «call Back» and the Manager of the company will help You choose the products that best fits individual requirements. Full compliance with GOST and international quality standards. Buy today. Waiting for your orders.