Circle, tube, wire 07Х16Н6-ш (EP288-ш)
Equivalent
| Grade | analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 07X16H6 | EI288 | 301 | X12CrNi17-7 | Buy from stock, view availability |
Technical characteristics
Grade 07Х16Н6-sh (EP288-sh) refers to chromium-nickel alloy of austenitic-ferritic class. It is widely used in mechanical engineering. The most popular product out of it is a tube capable of withstanding a temperature of more than 1000 °C in high-temperature installations. 07Х16Н6-sh grade is considered to be highly alloyed. Carefully selected components help to improve physical and chemical resistance. Such steel contains up to 17.5% chromium. Chromium content of more than 24% not only does not increase corrosion resistance, but also reduces the alloy's processability. The composition contains up to 8% nickel and silicon and manganese additives. The purpose of alloying is to increase the technological properties of products: heat and heat resistance, the ability to withstand aggressive environments. Excessive alloying increases the cost of the alloy, so this process is carried out sparingly: the steel must be technologically advanced and its performance indicators must meet the required level.
Percentage composition of 07X16H6-SH (EP288-SH) (GOST 5632-72)
| Cr | C | Mn | S | P | Ni | Si | Fe |
|---|---|---|---|---|---|---|---|
| 15,5-17,5 | 0,05-0,09 | ≤0,8 | ≤0,02 | ≤0,035 | 5-8 | ≤0,6 | Basis |
Production
The steel is melted in an open arc furnace. The tubes are rolled at 1180 °C at the beginning of the process and 900 °C at the end. The steel is cooled after deformation. The first cooling is done in water, oil or air, while the second cooling is done with water, followed by holding for 4-5 hours. Tubes are welded using electrodes TsT-19.
Round is made by hot-rolled method with diameter from 5 to 270 mm, but manufactures subject to customer's requirements extend the limits of the standard. The circle is produced: high, increased and standard accuracy of manufacturing.
Supplier
Supplier "Auremo" offers to buy a circle, wire, pipe 07Х16Н6 (ЭИ288) today on favorable conditions. Rolled metal of this grade are widely demanded in the market of metal products, due to the optimal price-quality ratio.Orders are implemented in the shortest possible time. The quality is guaranteed by the strict observance of the technological norms of production. If you have any questions, you will always help with advice from experienced managers.
Buy, bargain price
Always in stock pipe, round, wire 07Х16Н6 (ЭИ288), the price - the best from the supplier. A large supply of stainless steel products in the warehouse of the company "Auremo" allows you to buy all the necessary products in one place. On bulk orders, the company provides preferential discounts.
