GOST 4029-63
GOST 4029−63 roofing Nails round. The design and dimensions (with Amendments No. 1, 2)
GOST 4029−63
Group В78
INTERSTATE STANDARD
ROOFING NAILS ROUND
The design and dimensions
Round roofing felt nails. Construction and dimensions
ISS 77.140.65
OKP 12 7100
Date of introduction 1964−07−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by the State Committee of standards, measures and measuring instruments of the USSR from
3. REPLACE GOST 4029−48
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
5. Limitation of actions taken by Protocol No. 5−94 of the Interstate Council for standardization, Metrology and certification (ICS 11−12−94)
6. EDITION (February 2009) with Amendments No. 1, 2 approved in November 1980, December 1987 (IUS 2−81, 4−88)
1. Design and dimensions round tolev nails shall be as specified in the drawing and in the table.
;
mm
The symbol of tar paper nails with a stem diameter of 2.0 mm and length 25 mm:
2x25 nails, GOST 4029−63
(Changed edition, Rev. N 1).
2. Technical requirements for nails according to GOST 283.
3. Theoretical mass of nails specified in the application.
(Added, Rev. N 1).
APPLICATION (reference). Theoretical mass of nails
APP
Reference
APP. (Changed edition, Rev. N 2).
The electronic text of the document
prepared by JSC «Code» and checked by:
the official publication of the
Wire nails: Sat. Standards. -
M.: STANDARTINFORM, 2009