By visiting this site, you accept the use of cookies. More about our cookie policy.

Sheet made of stainless steel


Grade analogue W. Nr. Aisi Uns En Order
12Х18Н10Т EP2 1.4541 321 X12CrNiTi18-10 Buy from stock, view availability
12Х18Н10Т-Н EP2 ~~~1.4541 ~~~321 ~~X12CrNiTi18-10 Buy from stock, view availability
12Х18Н10Т-М EP2 ~~~~1.4541 ~~~~321 ~~~X12CrNiTi18-10 Buy from stock, view availability
12Х18Н10Т-В EP2 ~~~~~1.4541 ~~~~~321 ~~~~X12CrNiTi18-10 Buy from stock, view availability
12Х18Н10Т-ТС Buy from stock, view availability
10Х17Н13М2Т EI448 1.4571 ~316Ti X10CrNiMoTi18-12 Buy from stock, view availability
20Х23Н18 EI417 1.4845 310S X12CrNi25-21 Buy from stock, view availability


Stainless steel differs with high corrosion resistance. This distinguishes it from ferrous metal-roll. High workability and attractive appearance are the real advantages of such sheet. It is easy to install and to operate. It does not require much time for repair or removal. This sheet also possesses super-high wear resistance. It is widely used almost in all sphere of national economy: in building industry, medicine, pharmaceutics, agriculture, manufacture of chemical and food capacities, at construction of welded structures, for inside and outside finishing etc. It is indispensable in conditions of high-temperature atmosphere and aggressive environment. In comparison to ferrous mill-products, stainless steel has a lower weight at the equal strength.


Thin sheet is made according to GOST 19 904−74, 5582−75. Thick sheet is made according to GOST 19 904−74, 19 903−74, 7350−77. Both of them undergo the special processing steps that are intended to increase long operational life and strength of material. They are manufactured by hot-rolling and cold-rolling. Thickness of hot-rolled sheet constitutes 2 — 50 mm. Cold-rolled has a thickness of 0.4 — 50 mm. Depending on quality class of material surface and composition, there are distinguished such types of sheets: pickled (decorative), polished (speculum), brushed, oxidized, skinpass etc. By accuracy level of rolling, it can be divided into standard, high, and super-high. Be evenness: super-high, high, and standard. There are two types of drawing: deep and standard; and three classes of surface quality. Steel cold-rolled sheet that intended to cold stamping has four quality classes. Checkered or perforated sheet is the most requested type of stainless flat metal-roll. It is delivered in flat sheets or in bobbins with a thickness of not more than 4 mm.

Steel cold-rolled sheets can be brushed, polished, speculum, decorative, food-grade.

DIN ASTM EN Surface Type
n (IIIc) 2B 2B Heat processed, cold-rolled, pickled Skinpass surface
c2 (IIa) 1 1 D Heat processed, hot-rolled, pickled Hot-rolled
M (IIId) BA 2 R with an annealing in vertical furnace, cold-rolled, with ammonia solution Speculum


It is widely utilized in different spheres of national economy: food industry at manufacture of capacities, chemical industry, welding constructions, outside and inside finishing, agriculture, medicine, building industry (making constructions and fencings, cladding of elevations etc). Perfect quality allows using it for manufacture of pharmaceutical and food equipment. Grade X12CrNiTi18−10 complies with the most severe standards. It is manufactured out of high-quality steel. It is resistant to corrosion effect at a temperature of 600 °C. This sheet can operate in extreme conditions and aggressive environment. Thereby, it is indispensable in chemical industry.

Percentage composition GOST 5632−72

Grade C Si Cr Cu Mn Ni Ti S P Fe
X12CrNiTi18−10 ≤ 0,12 ≤ 0,8 17 — 19 ≤ 0,3 ≤ 2 9 — 11 ≤ 0,8 0.02 0.035 the rest

X10CrNiMoTi18−12 grade has the same properties. It is utilized in manufacture of units and machines that are going to work at a high temperature and aggressive environment.

Percentage composition GOST 5632−72

Grade C Si Mo Cr Cu Mn Ni Ti S P Fe
X10CrNiMoTi18−12 ≤ 0,1 ≤ 0,8 2 — 3 16 — 18 ≤ 0,3 ≤ 2 12 — 14 ≤ 0,7 0.02 0.035 the rest

X12CrNi25−21 alloy has all advantages of high-alloyed steel — heat resistance, corrosion resistance. It can be rolled into thin or thick sheet, depending on application sphere and standards. It is much requested everywhere, including sector of industry. The customer is attracted by its perfect weldability above all as long as it does not have any limits.

Percentage composition GOST 5632−72

Grade C Si Cr Cu Mn Ni Ti S P Fe
X12CrNi25−21 ≤ 0,2 ≤ 1 22 — 25 --- ≤ 2 17 — 20 --- 0.02 0.035 the rest

Buy at a bargain stainless sheet price

You can buy stainless sheet in bobbins (thickness is up to 4 mm). Thickness of hot-rolled sheet constitutes 0.4 — 50 mm. Cold-rolled has a thickness of 2 — 50 mm. Buy stainless sheet right now. Surface can be rough or skinpass uniform. You can buy stainless sheet in «Auremo» stainless sheet supplier. A huge selection of products for the best stainless sheet price is presented in stock of «Auremo» stainless sheet supplier. There is the most affordable stainless sheet price from «Auremo» stainless sheet supplier.