GOST 4035-63
GOST 4035−63 Nails forming round. The design and dimensions (with Amendments No. 1, 2)
GOST 4035−63
Group В78
INTERSTATE STANDARD
THE NAILS FORMING ROUND
The design and dimensions
Round moulding nails. Construction and dimensions
ISS 77.140.65
OKP 12 7100
Date of introduction 1964−07−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR
2. APPROVED AND promulgated by the Decree of the State Committee of standards, measures and measuring instruments of the USSR from
3. REPLACE GOST 4035−48
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 283−75 | 2 |
5. Limitation of actions taken by Protocol No. 5−94 of the Interstate Council for standardization, Metrology and certification. (ICS 11−12−94)
6. EDITION (February 1990) with Amendments No. 1, 2 approved in November 1980, December 1987 (IUS 2−81, 4−88)
1. Design and dimensions round moulding nails shall be as specified in the drawing and in the table.
mm
The diameter of the rod |
The length of a nail |
The smallest head diameter |
| 1,2 |
50 | 2,0 |
| 1,4 |
60 70 |
2,5 |
| 1,6 |
80 100 |
2,8 |
| 1,8 | 120 150 |
3,2 |
The symbol of the molding nails with a shank diameter of 1.6 mm and a length of 100 mm:
Nails 1,6x100 GOST 4035−63
(Changed edition, Rev. N 1).
2. Technical requirements for nails according to GOST 283.
3. Theoretical mass of nails specified in the application.
(Added, Rev. N 1).
APPLICATION (reference). Theoretical mass of nails
APP
Reference
The size of nails |
The mass of 1000 nails, kg |
| 1,2х50 |
0,442 |
| 1,4х60 |
0,722 |
| 1,4х70 |
0,843 |
| 1,6x80 |
1,290 |
| 1,6x100 |
1,590 |
| 1,8х120 |
2,370 |
| 1,8х150 |
3,170 |
APP. (Changed edition, Rev. N 1, 2).
The electronic text of the document
prepared by JSC «Code» and checked by:
the official publication of the
Wire nails: Sat. Standards. -
M.: STANDARTINFORM, 2009
