GOST 8320.3-83

GOST 27772-2015 GOST P 52927-2015 GOST P 56354-2015 GOST P 56355-2015 GOST 30245-2012 GOST 32603-2012 GOST 24045-2016 GOST 8509-93 GOST 8283-93 GOST 8240-97 GOST 5257-98 GOST 30245-2003 GOST 24045-94 GOST 19772-93 GOST 19771-93 GOST 14635-93 GOST 8319.4-75 GOST 8319.13-75 GOST 8320.6-83 GOST 8320.2-83 GOST 8320.3-83 GOST 5267.8-90 GOST 5267.1-90 GOST 12492.4-90 GOST 12492.1-90 GOST 30565-98 GOST 5422-73 GOST 7511-73 GOST 9234-74 GOST 19425-74 GOST 8319.8-75 GOST 8319.5-75 GOST 8319.0-75 GOST 21026-75 GOST 8319.6-75 GOST 11474-76 GOST 13229-78 GOST 8281-80 GOST 8278-83 GOST 8320.10-83 GOST 8282-83 GOST 8320.9-83 GOST 8320.13-83 GOST 12492.15-90 GOST 5267.6-90 GOST 5267.0-90 GOST 5267.11-90 GOST 8319.12-75 GOST 10551-75 GOST 8319.11-75 GOST 25577-83 GOST 8320.4-83 GOST 8320.12-83 GOST 8320.0-83 GOST 5157-83 GOST 8320.5-83 GOST 26020-83 GOST 8320.11-83 GOST 4781-85 GOST 5267.2-90 GOST 12492.7-90 GOST 5267.9-90 GOST 12492.0-90 GOST 12492.10-90 GOST 12492.12-90 GOST 5267.12-90 GOST 8319.2-75 GOST 8320.7-83 GOST 8320.8-83 GOST 18662-83 GOST 8320.1-83 GOST 8510-86 GOST 8239-89 GOST 17152-89 GOST 12492.6-90 GOST 5267.10-90 GOST 12492.2-90 GOST 5267.4-90 GOST 5267.13-90 GOST 12492.5-90 GOST 12492.3-90 GOST 12492.8-90 GOST 5267.3-90 GOST 12492.14-90 GOST 12492.9-90 GOST 5267.7-90 GOST 12492.11-90 GOST 12492.13-90 GOST 5267.5-90

gost-83203-83.pdf (100.01 KiB)
ГОСТ 8320.3-83

GOST 8320.3−83 periodic sections produced by cross-helical rolling five-speed for electric motor shafts. Assortment

GOST 8320.3−83
Group B22

INTERSTATE STANDARD
PERIODIC SECTIONS
PRODUCED BY CROSS-HELICAL ROLLING FIVE-SPEED
FOR ELECTRIC MOTOR SHAFTS
Assortment
Periodic pentastep sections produced
by cross-helical rolling for electric motor shafts. Dimensions

OKP 09 4400

Date of introduction 1985−01−01

Resolution of the USSR State Committee for standards, dated April 20, 1983 N 1974 date of introduction is established 01.01.85

Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−12−95)

INSTEAD, GOST 8320.3−73

REISSUE

1. This standard applies to hot round periodic five-speed profiles for shaft motors, manufactured helical rolling.

2. Sizes, maximum rejections on them for profiles 1−4 N should match those in hell.1 and in table.1, for profile N 5−12 — on features.2 and table 2, for profiles N 13, 14 — on features.3 and table.3.

ГОСТ 8320.3-83 Профили периодические поперечно-винтовой прокатки пятиступенчатые для валов электродвигателей. Сортамент

Damn.1

Table 1

Dimensions, mm

Profile number
Nomin.	Pred. off.	Nomin.	Pred. off.	Nomin.	Nomin.	Nomin.	Nomin.	Pred. off	Nomin.	Pred. off.	Nomin.	Pred. off.
1	166	±5	992	±5	983	1153	3137	216	+15	74	±5	466	±5
2	166	1047	1038	1208	3302	216	74	521
3	192	1111	1107	1308	2424	225	80	527
4	192	1161	1157	1358	2524	225	80	577

Extension table 1

Dimensions, mm


But — Mer Pro — Phil	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	— Start cutting	The number of periods	The mass of one of the period, kg
1	736	±5	939	+15	71	+1,0 -1,5	76	+1,0 -1,5	100	+1,0 -1,5	91	+1,0 -1,5	86	+1,0 -1,5	9	3	Of 47.00 52,50
2	791	992	71	76	100	91	86	9	3	50,00 55,30
3	847	1088	81	91	115	106	101	9	2	72,10 80,50
4	897	1138	81	91	115	106	101	9	2	75,60 Of 84.00

Damn.2

Table 2

Dimensions, mm


But- measures about — Phil	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	But- min.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.
5	386	±5	967	±5	957	1924	347	+15	207	±5	112	±5	475	±5	565,5	±5
6	326	907	897	1804	347	207	112	415	505,5
7	310	835	825	2495	319	179	105	368	452
8	233	758	748	2264	319	179	105	291	375
9	40	939	933	2811	639	371	278	144	260
10	40	864	858	2586	564	296	203	144	260
11	40	1122	1116	3360	441	224	108	314	407
12	30	708	700	3532	458	235	160	120	215

Extension table 2

Dimensions, mm


But- measures of Pro — Fi- La	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	At the start of the RES- ku	Num- lo periods	The mass of od- tion period, kg
5	610	+15	90	+1,0 -1,5	105	+1,0 -1,5	115	+1,0 -1,5	130	+1,0 -1,5	110	+1,0 -1,5	105	+1,0 -1,5	10	2	Of 79.80
6	550	90	105	115	130	110	105	10	2	73,50
7	506	73	78	88	100	85	78	10	3	40,00
8	429	73	78	88	100	85	78	10	3	35,20
9	294	76	85	92	98	92	86	6	3	42,80
10	294	75	85	92	98	92	86	6	3	38,60
11	675	75	86	92	98	92	85	6	3	Hurdle of 48.70
12	242	55	65	70	77	67	62	8	5	14,80

Damn.3

Table 3

Dimensions, mm


The number of Pro- Phil	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	But- min.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.
13	30	±5	596	±5	588	2972	455	±5	232	±5	150	±5	105	±5
14	86	1334	1328	2662	916	690	600	310

Dimensions, mm


But- measures about — Phil	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	But- min.	Pred. off.	— Start cutting	The number of periods	The mass of one of the period, kg
13	133	±5	55	+1,0 -1,5	65	+1,0 -1,5	70	+1,0 -1,5	77	+1,0 -1,5	65	+1,0 -1,5	8	5	17,7
14	412	90	95	104	110	92	6	2	80,5

The text of the document is verified by:
the official publication of the
Steel. Profiles: Sa. Standards. -
M.: IPK Publishing house of standards, 2003