GOST 5267.13-90
GOST 5267.13−90 Profile for the binding of the door. Assortment
GOST 5267.13−90
Group B22
INTERSTATE STANDARD
PROFILE FOR OBVJAZKI DOORS
Assortment
Section for door binding. Dimensions
OKP 09 3200
Date of introduction 1991−07−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on management of quality and standards from
3. REPLACE GOST 5267.13−78
4. Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−95)
5. REISSUE
This standard applies to hot rolled profile for strapping the doors of the car.
1. Sizes, limit deviations, cross section, weight 1 m of the profile and reference values shall be as given in the drawing and in the table.
The cross-sectional area, cm |
Weight 1 m, kg |
Reference value | |||||||
The bottom |
Top |
Left |
Right |
||||||
cm |
cm |
cm | |||||||
10,4 |
8,16 |
33,046 |
52,796 |
15,27 |
8,63 |
To 19.18 |
15,10 |
3,50 |
3,83 |
2. The curvature of the profile in the horizontal and vertical planes should not exceed 0.4% of length.
3. The twist profile is not allowed.