GOST 5267.2-90

GOST 27772-2015 GOST P 52927-2015 GOST P 56354-2015 GOST P 56355-2015 GOST 30245-2012 GOST 32603-2012 GOST 24045-2016 GOST 8509-93 GOST 8283-93 GOST 8240-97 GOST 5257-98 GOST 30245-2003 GOST 24045-94 GOST 19772-93 GOST 19771-93 GOST 14635-93 GOST 8319.4-75 GOST 8319.13-75 GOST 8320.6-83 GOST 8320.2-83 GOST 8320.3-83 GOST 5267.8-90 GOST 5267.1-90 GOST 12492.4-90 GOST 12492.1-90 GOST 30565-98 GOST 5422-73 GOST 7511-73 GOST 9234-74 GOST 19425-74 GOST 8319.8-75 GOST 8319.5-75 GOST 8319.0-75 GOST 21026-75 GOST 8319.6-75 GOST 11474-76 GOST 13229-78 GOST 8281-80 GOST 8278-83 GOST 8320.10-83 GOST 8282-83 GOST 8320.9-83 GOST 8320.13-83 GOST 12492.15-90 GOST 5267.6-90 GOST 5267.0-90 GOST 5267.11-90 GOST 8319.12-75 GOST 10551-75 GOST 8319.11-75 GOST 25577-83 GOST 8320.4-83 GOST 8320.12-83 GOST 8320.0-83 GOST 5157-83 GOST 8320.5-83 GOST 26020-83 GOST 8320.11-83 GOST 4781-85 GOST 5267.2-90 GOST 12492.7-90 GOST 5267.9-90 GOST 12492.0-90 GOST 12492.10-90 GOST 12492.12-90 GOST 5267.12-90 GOST 8319.2-75 GOST 8320.7-83 GOST 8320.8-83 GOST 18662-83 GOST 8320.1-83 GOST 8510-86 GOST 8239-89 GOST 17152-89 GOST 12492.6-90 GOST 5267.10-90 GOST 12492.2-90 GOST 5267.4-90 GOST 5267.13-90 GOST 12492.5-90 GOST 12492.3-90 GOST 12492.8-90 GOST 5267.3-90 GOST 12492.14-90 GOST 12492.9-90 GOST 5267.7-90 GOST 12492.11-90 GOST 12492.13-90 GOST 5267.5-90

gost-52672-90.pdf (44.26 KiB)
ГОСТ 5267.2-90

Profile of zet. Assortment

GOST 5267.2−90

Group B22

STATE STANDARD OF THE UNION OF SSR

PROFILE ZETOVY

Assortment

Z-section. Dimensions

OKP 09 3200

Valid from 01/07/91
before 01.07.2001

INFORMATION DATA

1. DEVELOPED AND IMPLEMENTED by the Ministry of Metallurgy of the USSR

DEVELOPERS

S. I. Rudiuk, Cand. tech. sciences; EL Orlov, Cand. tech. sciences; V. I. Grigoriev; I.G.Kurando, Cand. tech. sciences; VVBiller, Cand. tech. sciences; VAAna, Cand. tech. sciences; K.F. Peretyatko; R.V. Volkov; Zh.M.Roeva, Cand. economy. sciences; V. Yu. Yukhnov

2. APPROVED AND ENTRY INTO ACTION By the decision of the State Committee of the USSR for the management of product quality and standards dated 25.06.90 No. 1762

3. The period of the first audit is 1996. The frequency of verification is 5 years

4. REPLACEMENT GOST 5267.2−78

This standard applies to hot rolled zet profiles for car building.

1. Dimensions, limit deviations, cross-sectional area, mass of 1 m profile and reference values shall be as shown in the drawing and in the table.

Profile of zet. Assortment


Profile number	Dimensions and limit deviations, mm

	nom.	before. off	nom.	before. off	nom.	before. off	nom.	before. off
4	40	± 1.2	40	± 1.8	4,5	+0.3	6.5	+0.3	6.5
						-1.0		-1.0
8	80	± 2.4	65	± 2.0	6.0	+0.4	6.0	+0.4	6.0
						-1.0		-1.0
10	100	± 3.0	75	± 2.3	6.5	+0.5	6.5	+0.5	6.5
						-1.0		-1.0


Profile number	Cross-sectional area section, cm	Weight 1 m, kg	Reference Values of Values

			cm		cm		cm
4	6.56	5.15	15.70	22.83	7.85	6.05	3.78	2.0
8	12.00	9.42	123,92	94.04	30.98	15.17	6.20	4.0
10	15.55	12.20	251.56	158.37	50.31	22.07	7.18	5.0