GOST 5267.9-90

• gost-52679-90.pdf (36.54 KiB)
  ГОСТ 5267.9-90

GOST 5267.9−90 Profile for the wedge of the coupler. Assortment

GOST 5267.9−90
Group B22

INTERSTATE STANDARD

PROFILE FOR WEDGE COUPLER

Assortment

Section for automatic coupling wedge. Dimensions

OKP 09 3200

Date of introduction 1991−07−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on management of quality and standards from 25.06.90 N 1763

3. REPLACE GOST 5267.9−78

4. Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−95)

5. REISSUE

This standard applies to hot rolled profile for wedge coupler.

1. Sizes, limit deviations, cross section, weight 1 m of the profile and reference values shall be as given in the drawing and in the table.

2. The curvature of the profile in the horizontal and vertical planes should not exceed 0.5% of the length.

3. The twist profile is not allowed.