GOST 12492.1-90

GOST 27772-2015 GOST P 52927-2015 GOST P 56354-2015 GOST P 56355-2015 GOST 30245-2012 GOST 32603-2012 GOST 24045-2016 GOST 8509-93 GOST 8283-93 GOST 8240-97 GOST 5257-98 GOST 30245-2003 GOST 24045-94 GOST 19772-93 GOST 19771-93 GOST 14635-93 GOST 8319.4-75 GOST 8319.13-75 GOST 8320.6-83 GOST 8320.2-83 GOST 8320.3-83 GOST 5267.8-90 GOST 5267.1-90 GOST 12492.4-90 GOST 12492.1-90 GOST 30565-98 GOST 5422-73 GOST 7511-73 GOST 9234-74 GOST 19425-74 GOST 8319.8-75 GOST 8319.5-75 GOST 8319.0-75 GOST 21026-75 GOST 8319.6-75 GOST 11474-76 GOST 13229-78 GOST 8281-80 GOST 8278-83 GOST 8320.10-83 GOST 8282-83 GOST 8320.9-83 GOST 8320.13-83 GOST 12492.15-90 GOST 5267.6-90 GOST 5267.0-90 GOST 5267.11-90 GOST 8319.12-75 GOST 10551-75 GOST 8319.11-75 GOST 25577-83 GOST 8320.4-83 GOST 8320.12-83 GOST 8320.0-83 GOST 5157-83 GOST 8320.5-83 GOST 26020-83 GOST 8320.11-83 GOST 4781-85 GOST 5267.2-90 GOST 12492.7-90 GOST 5267.9-90 GOST 12492.0-90 GOST 12492.10-90 GOST 12492.12-90 GOST 5267.12-90 GOST 8319.2-75 GOST 8320.7-83 GOST 8320.8-83 GOST 18662-83 GOST 8320.1-83 GOST 8510-86 GOST 8239-89 GOST 17152-89 GOST 12492.6-90 GOST 5267.10-90 GOST 12492.2-90 GOST 5267.4-90 GOST 5267.13-90 GOST 12492.5-90 GOST 12492.3-90 GOST 12492.8-90 GOST 5267.3-90 GOST 12492.14-90 GOST 12492.9-90 GOST 5267.7-90 GOST 12492.11-90 GOST 12492.13-90 GOST 5267.5-90

gost-124921-90.pdf (50.41 KiB)
ГОСТ 12492.1-90

GOST 12492.1−90 Profile hat with agricultural machinery. Assortment

GOST 12492.1−90
Group B22

INTERSTATE STANDARD

PROFILE HAT
FOR AGRICULTURAL MACHINERY

Assortment

Agricultural machinery. Channel section. Dimensions

OKP 09 4113

Date of introduction 1991−01−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on management of quality and standards from 30.03.90 N 752

3. INSTEAD, GOST 12492.4−72

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

The designation of the reference document referenced	Item number
GOST 535−88	1
GOST 19281−89	1

5. Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−95)

6. REISSUE
This standard applies to hot pan profile.

1. Shape, dimensions, limit deviations according to him, the cross-sectional area, weight of 1 m of the profile and reference values relative to the axes must meet: profile pan 1 — PL.1, hell.1; profile hat 2 — table.2, hell.2.

Table 1

Steel grade	The cross-sectional area, cm	Weight of 1 m of section, kg	The moment of inertia, cm

Ст3сп2 and Ст5сп2 according to GOST 535	2,07	1,62	0,493	1,49
For 09G2S GOST 19281

Damn.1. Profile pan 1

Profile pan 1

ГОСТ 12492.1-90 Профиль корытный для сельскохозяйственных машин. Сортамент

Damn.1

Damn.2. Profile hat 2

Profile hat 2

ГОСТ 12492.1-90 Профиль корытный для сельскохозяйственных машин. Сортамент

Damn.2

Table 2

Steel grade	The cross-sectional area, cm	Weight of 1 m of section, kg	The moment of inertia, cm

St3kp 1	2,2	1,73	0,291	2,036
3 st3ps
2 st3ps by GOST 535

2. The curvature of the profile in the vertical and horizontal planes should not exceed 0.4% of length. At the request of the consumer profiles are produced with a curvature of no more than 0.2% of the length.

The text of the document is verified by:
the official publication of the
Steel. Profiles: Sa. Standards. -
M.: IPK Publishing house of standards, 2003