GOST 8319.4-75
GOST 8319.4−75 Profiles hot-rolled steel periodical lengthwise-rolled for the front axle of buses PAZ-672 and PAZ-3205. Assortment (Change No. 1)
GOST 8319.4−75
Group B22
INTERSTATE STANDARD
PROFILES HOT-ROLLED STEEL PERIODICAL LENGTHWISE-ROLLED
FOR the FRONT AXLE of BUSES PAZ-672 and PAZ-3205
Assortment
Hot-rolled steel periodical lengthwise-rolled sections for front axle
of PAZ-672 and PAZ-3205 bus. Dimensions
OKP 09 3001
Date of introduction 1977−01−01
The decision of the State Committee of standards of Ministerial Council of the USSR from December 29, 1975 N 4063 date of introduction is established 01.01.77
The expiration time limit is removed by the Resolution of Gosstandart from
EDITION with Change No. 1, approved in December 1986 (IUS 3−87)
1. This standard applies to hot-rolled steel periodic profile for the front axle of buses PAZ-672, followed by hot working.
2. Profile manufactured in accordance with the requirements of GOST 8319.0 75 of this standard.
3. Dimensions and limit deviations according to him, the shift circuits, the number of periods and the weight of one period must match the drawing and table.
________________
* Dimensions for reference.
The contour offset, mm |
The number of periods. |
The mass of one of the period, kg | |||
longitudinal |
cross | ||||
mm |
no more | ||||
150−200 |
50−75 |
10 |
1,5 |
4 |
66,0 |
Example of designation of the profile for the front axle of the bus the GROOVE-672 of steel marks 35X:
Profile for autouse PAZ-672
(Changed edition, Rev. N 1).
4. Allow the execution of cross-sections along the contour .
5. Allow the execution of the profile contour .
6. The burrs on the ends of the profile are not allowed.
The text of the document is verified by:
the official publication of the
Steel. Profiles: Sa. Standards. -
M.: IPK Publishing house of standards, 2003
