GOST 8967-75
GOST 8967−75 pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Nipples. Basic dimensions
GOST 8967−75
Group В62
INTERSTATE STANDARD
Pipe STEEL connections WITH CYLINDRICAL THREAD FOR PIPELINES P=1,6 MPa. NIPPLE
Basic dimensions
Pipe steel connections with cylindrical thread for pipelines P=1,6 MPa. Nipples. Basic dimensions
ISS 23.040.40
Date of introduction 1977−01−01
The decision of the State standards Committee of the Council of Ministers of the USSR from
The expiration time limit is removed by the Resolution of Gosstandart of the USSR from
REPLACE GOST 8967−59
REPRINTING. September 2010
1. This standard applies to the steel nipple with zinc coated and uncoated with cylindrical thread serving for the connection of water and gas pipes with application of sealant in heating, plumbing, and gas lines and other systems operating in conditions of aggressive environments (water, saturated steam, combustible gas, etc.) carried out at a temperature environment not higher than 175 °C and pressure P=1.6 MPa.
2. The principal dimensions of nipples shall be as specified in the drawing and in the table.
Drawing. The principal dimensions of the nipples
Conditional pass |
Thread |
Length |
Weight uncoated kg |
| 8 |
|
18 |
0,008 |
| 10 |
|
20 |
0,012 |
| 15 |
|
24 |
0,021 |
| 20 |
|
27 |
0,031 |
| 25 |
|
30 |
0,052 |
| 32 |
|
34 |
0,075 |
| 40 |
|
38 |
0,109 |
| 50 |
|
42 |
0,148 |
| (65) |
|
47 |
0,234 |
| (80) |
|
52 |
0,316 |
| 100 |
|
79 |
0,614 |
Note. Nipple with specified in brackets, are made at the request of the consumer.
Examples of symbols
Nipples without coverage = 50 mm:
The nipple 50 GOST 8967−75
The same zinc-coating:
The nipple 50 C GOST 8967−75
3. Nipples are manufactured in accordance with the requirements of GOST 8965−75 of pipes according to GOST 3262−75 and GOST 10707−80.
