GOST R 53383-2009

• gost-r-53383-2009.pdf (828.13 KiB)
  ГОСТ Р 53383-2009

GOST R 53383−2009 of seamless hot deformed steel Pipes. Specifications (with Change No. 1)

GOST R 53383−2009

Group В62

NATIONAL STANDARD OF THE RUSSIAN FEDERATION

PIPES STEEL SEAMLESS HOT-DEFORMED

Specifications

Hot-deformed seamless steel pipes. Specifications

OKS 23.040.10
OKP 13 1700
13 1900

Date of introduction 2010−03−01

Preface

The objectives and principles of standardization in the Russian Federation established by the Federal law of 27 December 2002 N 184-FZ «On technical regulation», and rules for the application of national standards of the Russian Federation — GOST R 1.0−2004 «Standardization in the Russian Federation. The main provisions"

Data on standard

1 DEVELOPED by the Open joint stock company «Russian scientific research Institute of pipe industry» (JSC «RosNITI»)

2 SUBMITTED by the Technical Committee for standardization TC 357 «Steel and cast iron pipes and cylinders"

3 APPROVED AND put INTO EFFECT by the Federal Agency for technical regulation and Metrology from September 1, 2009 N 312-St

4 INTRODUCED FOR THE FIRST TIME


Information about the changes to this standard is published in the annually issued reference index «National standards», and the text changes and amendments — in monthly indexes published information «National standards». In case of revision (replacement) or cancellation of this standard a notification will be published in a monthly information index «National standards». Relevant information, notification and lyrics are also posted in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet

The Change N 1, approved and promulgated by the Order of Rosstandart from 28.11.2011 № 606-St c 01.09.2012

Change No. 1 made by the manufacturer of the database in the text IUS N 2, 2012

1 Scope

This standard applies to hot seamless pipes of General purpose carbon steel and alloy steel for pipelines, structures, machine parts and other technical purposes.

For manufacture of pipes to be used rolled, forged and continuously cast billets.

2 Normative references

This standard uses the regulatory references to the following standards:

GOST R 53364−2009 (ISO 10474:1991) steel Pipes and products from pipes. Documents on acceptance inspection

GOST 380−2005 carbon Steel of ordinary quality. Brand

GOST 1050−88 hire gauged bars with special surface finishing of carbon structural quality steel. General specifications

GOST 3728−78 Pipe. Test method for bend

GOST 3845−75 Pipe metal. Test method hydraulic pressure

GOST 4543−71 rolled alloy structural steel. Specifications

GOST 6507−90 Micrometers. Specifications

GOST 7502−98 metallic measuring tape. Specifications

GOST 8026−92 Line calibration. Specifications

GOST 8693−80 (ISO 8494−86) of the Pipe metal. Test method turn-up cuffs

GOST 8694−75 Pipe. The test method for distribution

GOST 8695−75 Pipe. Test method for flattening

GOST 9012−59 (ISO 410−82, ISO 6506−81) Metals. Method of measuring hardness Brinell hardness

GOST 9454−78 Metals. Test method for impact strength at low, room and elevated temperatures

GOST 10006−80 (ISO 6892−84) of the Pipe metal. Test method tensile

GOST 10243−75 Steel. Test method and evaluation of the macrostructure

GOST 10692−80 Pipe steel, cast iron and fittings to them. Acceptance, marking, packing, transportation and storage

GOST 11358−89 Thickness and stenkomer indicator with a scale division of 0.01 and 0.1 mm. specifications

GOST 12344−2003 Steel alloyed and high alloy. Methods for determination of carbon

GOST 12345−2001 (ISO 671−82, ISO 4935−89) Steel alloyed and high alloy. Methods of determining sulphur

GOST 12346−78 (ISO 439−82, ISO 4829−1-86) Steel alloyed and high alloy. Methods for determination of silicon

GOST 12347−77 Steel alloyed and high alloy. Methods for determination of phosphorus

GOST 12348−78 (ISO 629−82) Steel alloyed and high alloy. Methods for determination of manganese

GOST 12349−83 Steel alloyed and high alloy. Methods for determination of tungsten

GOST 12350−78 Steel alloyed and high alloy. Methods for determination of chromium

GOST 12351−2003 (ISO 4942:1988, ISO 9647:1989) Steel alloyed and high alloy. Methods for determination of vanadium

GOST 12352−81 Steel alloyed and high alloy. Methods for determination of Nickel

GOST 12353−78 Steel alloyed and high alloy. Methods for determination of cobalt

GOST 12354−81 Steel alloyed and high alloy. Methods for determination of molybdenum

GOST 12355−78 Steel alloyed and high alloy. Methods for determination of copper

GOST 12356−81 Steel alloyed and high alloy. Method of determining titanium

GOST 12357−84 Steel alloyed and high alloy. Methods for determination of aluminium

GOST 12358−2002 Steel alloyed and high alloy. Methods for determination of arsenic

GOST 12359−99 (ISO 4945−77) Steels carbon, alloyed and high alloy. Methods for determination of nitrogen

GOST 12360−82 Steel alloyed and high alloy. Methods of boron determination

GOST 12361−2002 Steel alloyed and high alloy. Methods for determination of niobium

GOST 12362−79 Steel alloyed and high alloy. Methods for determination of trace antimony, lead, tin, zinc and cadmium

GOST 12363−79 Steel alloyed and high alloy. Methods for determination of selenium

GOST 12364−84 Steel alloyed and high alloy. Methods for the determination of cerium

GOST 12365−84 Steel alloyed and high alloy. Methods for determination of zirconium

GOST 18895−97 Steel. Method of photoelectric spectral analysis

GOST 19281−89 rolled steel with increased strength. General specifications

GOST 22536.0−87 carbon Steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1−88 carbon Steel and unalloyed cast iron. Methods for determination of total carbon and graphite

GOST 22536.2−87 carbon Steel and unalloyed cast iron. Methods of determining sulphur

GOST 22536.3−88 carbon Steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4−88 carbon Steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5−87 (ISO 629−82) carbon Steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6−88 carbon Steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7−88 carbon Steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8−87 carbon Steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9−88 carbon Steel and unalloyed cast iron. Methods for determination of Nickel

GOST 22536.10−88 carbon Steel and unalloyed cast iron. Methods for determination of aluminium

GOST 22536.11−87 carbon Steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12−88 carbon Steel and unalloyed cast iron. Methods for determination of vanadium

GOST 28473−90 Iron, steel, ferroalloys, chromium and manganese metal. General requirements for methods of analysis

Note — When using this standard appropriate to test the effect of reference standards in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet or published annually by the information sign «National standards» published as on January 1 of the current year and related information published monthly indexes published in the current year. If the reference standard is replaced (changed), when using this standard should be guided by replacing (amended) standard. If the reference standard is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.


(Changed edition, Rev. N 1).

3 Requirements when ordering

3.1 When ordering the customer must provide the information listed in table 1.


Table 1

(Changed edition, Rev. N 1).

3.2 Examples of symbols:

Pipe outer diameter 70 mm, wall thickness of 3.5 mm, a length in multiples of 1250 mm, regular accuracy of manufacturing, from steel grade 10, made group B a GOST R 53383−2009:

Pipe 703,51250 cu — B — 10 GOST R 53383−2009

Pipe outer diameter 70 mm, wall thickness 3.5 mm, length 6000 mm (measuring length), high precision manufacturing, of steel grade 40X, made by the group In GOST R 53383−2009:

Pipe 703,56000 P — 40X GOST R 53383−2009

The same random length, made by group D GOST R 53383−2009:

Pipe 703.5 P — D GOST R 53383−2009

Pipe inner diameter of 70 mm, a wall thickness of 3.5 mm, length 6000 mm (measuring length), regular accuracy of manufacturing, from steel grade 10, made group B a GOST R 53383−2009:

Pipe EXT.703,56000 — B — 10 GOST R 53383−2009

Pipe an outer diameter of 95 mm, an inner diameter of 76 mm, permitted by raznostnogo of random length, regular accuracy of manufacturing, from steel grade 10, made group B a GOST R 53383−2009:

Pipe 95EXT.76 — B — 10 GOST R 53383−2009

Pipe outer diameter 70 mm manufacturing high precision in outside diameter, a wall thickness of 3.5 mm, regular accuracy of manufacturing of the wall thickness of random length, of steel grade 10, made group B a GOST R 53383−2009:

Pipe 70 nW, 5 — B — 10 GOST R 53383−2009

4 Assortment

4.1 Dimensions and weight of 1 m of pipes shall be as given in table 2.


Table 2 — Dimensions and weight of 1 m pipe

Continuation of table 2

Continuation of table 2

End of table 2