GOST 21996-76

• gost-21996-76.pdf (594.23 KiB)
  ГОСТ 21996-76

INTERSTATE STANDARD

THE COLD-ROLLED STRIP STEEL HEAT-TREATED Specifications Steel cold-rolled heat-treated strip. Specifications

GOST 21996−76

Date of introduction 01.01.78

This standard applies to cold rolled strip of heat-treated steels, tool and spring steel for the manufacture of spring details and springs, with the exception of clockwork.

(Changed edition, Rev. No. 2, 3).

1. CLASSIFICATION AND ASSORTMENT

1.1. The tape is divided into:

a) strength (ultimate tensile strength or hardness) into groups:

first — 1P,

second — 2P,

third — 3P;

b) for precision manufacturing:

thickness:

normal exactly

increased accuracy — FRI,

high precision W

width:

normal exactly

increased accuracy — PH

high — precision HS;

C) at sight surface:

setlocaleinfo,

setlocale with the colors of a tint — TS,

polished,

colorsound,

dark — H;

g) according to edges:

with cut edges,

with finished edges — D.

Table 1

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	11	12	13	14	15	16	18	20	22	23	24	25	26	28	30	32	35	36	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,11	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,12	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,13	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,14	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,15	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,16	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,18	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,24	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,32	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,35	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,36	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,40	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,45	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,50	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,55	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,60	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,63	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,65	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,70	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,80	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,90	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,0	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,1	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,2	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,3	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+

Notes:

1. The sign «+" means that the tape is of specified dimensions is made, the sign «-" means that the specified tape size is not manufactured.

2. (Deleted, Rev. No. 2).

1.2. Tape made sizes specified in table. 1. Tapes of various types are made of the amounts specified in the reference Appendix 1.

1.3. Limit deviations of the dimensions of the tape shall be as specified in table. 2 and 3.

Table 2

mm

The thickness of the strip	Maximum deviations in thickness of the tape-precision manufacturing
	normal	high	high
0,05 — 0,08	-0,015	-0,010	-0,008
0,09 — 0,15	-0,020	-0,015	-0,008
0,16 — 0,25	-0,03	-0,02	-0,01
0,26 — 0,40	-0,04	-0,03	-0,02
0,45 — 0,70	-0,05	-0,04	-0,02
0,80 — 0,90	-0,07	-0,05	-0,03
1,00 — 1,30	-0,09	-0,06	-0,04

Table 3

mm

The thickness of the strip	Tolerances for the width of the tape width
	up to 80	over 80	up to 80	over 80	up to 80
	normal precision manufacturing		manufacturing high precision		high-precision manufacturing
To 0.5	-0,3	-0,4	-0,2	-0,3	-0,1
SV. 0.5 to 1.3	-0,4	-0,5	-0,3	-0,4	-0,2

Note. Tapes for non-critical assignments at the request of the consumer allowed the increase of the maximum deviations of 1.5 times compared with the deviations of the tape normal to the accuracy, dened in tab. 3.

(Changed edition, Rev. No. 2, 3).

Examples of symbols

Tape strength group 1P, manufacturing high precision on the thickness, normal accuracy in width, cvetlicarna with the colors of a tint, with finished edges, size 0,720 mm:

Tape 1P-PT-TS-D-0,720 GOST 21996−76

Tape strength group 3P, manufacturing high precision thickness and width, cvetlicarna, cut edges, size 0,315 mm:

Tape 3P-PT-PN-0,315 GOST 21996−76

Ribbon of steel 65G, group strength 2P, normal accuracy in thickness and width, polished with finished edges size 0,2512 mm:

Tape 65G-2P-S-D-0,2512 GOST 21996−76.

(Changed edition, Rev. No. 2).

2. TECHNICAL REQUIREMENTS

2.1. Tape shall be manufactured in accordance with the requirements of this standard for technological regulations approved in the prescribed manner, of steel grades 50, 60 according to GOST 1050; U7A, U8A, U9A, U10A, U12A according to GOST 1435, 65G, 60S2A, 70, 70S2KHA according to GOST 14959; 13KH according to GOST 5950.

(Changed edition, Rev. No. 2).

2.2. Rupture strength or hardness of the tape shall be as specified in table. 4.

Table 4

Group strength tape	The tensile strength σIn N/mm2 (kgf/mm2)	The Vickers hardness, H
1P	1270 — 1570 (130 — 60)	375 — 485
2P	1580 — 1860 (161 — 190)	486 — 600
3P	SV. 1860 (190)	SV. 600

Note. The tape with thickness less than 0.25 mm hardness do not.

Fabrication tape is one of the indicators of strength (temporary resistance or hardness). The other indicator is not controlled.

Tape high quality production run values of temporary resistance in the party should not exceed 200 N/mm² (20 kgf/mm²) or run-up values of hardness Vickers should not exceed 66 HV. For strength group 3P temporary resistance must not exceed 2160 N/mm² (220 kgf/mm²) and the Vickers hardness is 670 HV.

(Changed edition, Rev. No. 1, 2, 3).

2.3. At customer’s request, the tape must withstand the test of inflection. The number of bends should conform to the standards specified in table. 5. Tape 1P and 2P groups of thickness greater than 1.0 mm and the tape 3P group with thickness more than 0.8 mm at the inflection are not experiencing.

Table 5

Nominal tape thickness, mm	The radius of the rollers of the device, mm	The number of kinks, not less, for the ribbon group
		1P		2P		3P
		50, 60, 70, 65G, U7A, U8A	U9A, U10A, U12A, БОС2А, 70S2KHA	50, 60, 70, 65G, U7A, U8A	U9A, U10A, U12A, 60S2A, 70S2KHA	50, 60, 70, 65G, U7A, U8A	U9A, U10A, U12A, 60S2A, 70S2KHA
0,08	1	29	26	25	20	20	16
0,09	1	27	25	24	19	19	15
0,10	1	26	24	22	18	18	14
0,11	1	23	20	20	16	16	13
0,12	1	20	17	17	14	15	12
0,13	1	18	16	15	12	11	9
0,14	1	17	15	13	11	9	7
0,15	2	31	22	22	18	18	15
0,16	2	28	21	21	16	17	14
0,18	2	25	19	19	15	15	12
0,20	2	23	18	17	14	13	10
0,22	2	20	17	15	12	11	9
0,24	2	18	16	13	11	9	7
0,25	2	17	15	12	10	7	6
0,26	2	14	13	10	9	6	3
0,28	4	37	30	26	21	21	17
0,30	4	35	29	26	20	19	16
0,32	4	33	27	24	19	18	15
0,35	4	31	26	22	18	16	13
0,36	4	30	25	21	17	15	12
0,40	4	26	24	19	15	12	10
0,45	4	22	20	15	13	8	6
0,50	6	31	25	22	18	19	15
0,55	6	29	23	20	16	16	12
0,60	6	25	21	17	14	11	7
0,63	6	22	20	14	11	9	6
0,65	6	21	18	13	10	7	5
0,70	6	20	16	12	9	5	3
0,80	8	17	14	11	9	3	2
0,90	8	14	12	7	4	-	-
1,0	8	12	10	2	1	-	-

(Changed edition, Rev. No. 1).

2.4. On the surface of the tape should not be sunsets, bundles, scratches and rust. Not allowed longitudinal scratches, sinks and risks, the prints from the rolls, the depth or height for setlocale, setlocale with the colors of a tint, polished, colorsound strips exceeds half of the maximum deviations in thickness, for dark strips — limit deviation on thickness.

(Changed edition, Rev. No. 3).

2.5. Setlocalint tape should have a surface from light gray to dark gray color.

Setlocalint ribbon with the colors of tint may have a surface with non-uniform colors of tint from pale yellow to dark blue.

Polished tape should have a shiny surface. Colonized the tape shall have a pre-polished surface.

The colorization color from light yellow to dark blue. One roll is allowed at the same time different hues of the colorization.

The dark ribbon is not regulated. The surface of the dark tape can be covered with a layer of burned grease and oxide film.

2.6. The parameters of surface roughness setlocale, setlocale with the colors of a tint, polished and calaritanus tape according to GOST 2789 must be: Ra no more than 0.63 microns, or Rz is not more than 3.2 µm.

2.7. Decarburization of the surface of the tape to the pure ferrite is not allowed. Depth unilateral, partial decarburization shall not exceed for the ribbon of steel 60S2A, 70S2KHA — 3% of the nominal thickness of the tape, for tapes from other brands of steel — 2% of the nominal thickness of the tape.

2.8. By agreement between the consumer and the manufacturer tape is produced by determining the value of flatness.

2.7; 2.8. (Changed edition, Rev. No. 2).

2.9. On the edges of the belt should be free of flaws and cracks. Allowed burrs with the size not more than half of the maximum deviations in thickness of the tape and uneven cutting with the size not more than half of the maximum deviations in width.

Machined edges should be blunted. On the treated edges are allowed traces of processing, nesochetanie place not more than 10% of the entire surface of the edges in a roll.

2.10. At the request of the manufactured tape:

a) from a specific grade of steel listed in clause 2.1. By agreement between manufacturer and consumer tape can be manufactured of other steel grades;

b) strength group 3P for temporary tear resistance of not more than 2160 N/mm² (220 kgf/mm²);

b) with the parameters of surface roughness Ra of not more than 0,32 µm or Rz is not more than 1.6 µm according to GOST 2789, by agreement with the consumer — with the parameters of surface roughness Ra is not more than 0.16 µm or Rz is not more than 0.8 µm according to GOST 2789;

g) regulated globcast not exceeding 0.5% of the width of the tape. By agreement between the consumer and the manufacturer tape may be provided with globcast less than 0.5% of the total width;

d) controlled camber not to exceed 2 mm per 1 m length tape, measuring tool — not more than 1 mm per 1 m length of the tape;

e) with controlled elasticity and microstructure, the provisions of the characteristics are determined by agreement between the consumer and the manufacturer.

2.11. The tape is produced in rolls with internal diameter not less than 50 mm for strips of thickness less than 0.15 mm and not less than 400-fold thickness for the tape remaining thicknesses.

(Changed edition, Rev. No. 1, 2)

2.12. The coil should consist of one segment. Allowed in one roll no more than three pieces of tape, one bottoms, one group of strength and precision manufacturing, one type of surface and edges. The length of each segment must be at least 20 m. Locations of the winding must be checked. The number of such rolls should not exceed 100% of the party.

(Changed edition, Rev. No. 2).

2.13. The minimum weight of a roll consisting of one segment, is set at the rate of 0.6 kg per 1 mm² cross-section of the tape thickness up to 0.5 mm and at the rate of 0.3 kg per 1 mm² cross-section of the tape with the thickness more than 0.5 mm.

3. ACCEPTANCE RULES

3.1. The ribbon take parties. The party must consist of one of the tape melting, the steel grade, strength group, precision manufacturing, one type of surface and edges, size, and be accompanied by a document about quality that contains:

the name or trademark of the manufacturer;

the symbol of the tape;

grade of steel;

the melting number indicating the line type chemical analysis;

the results of the control tests;

the number of coils and the weight of the party;

batch number.

By agreement between manufacturer and consumer in the document as it is allowed to omit the results of all tests, and indicate: «Products correspond to GOST 21996−76».

(Changed edition, Rev. No. 1, 2, 3).

3.2. Check the external view and dimensions is carried out on each roll of party tape.

(Changed edition, Rev. No. 1).

3.3. From party ribbon, adopted in section 3.2, should be selected:

to check the temporary tear resistance or hardness, the number of excesses of 10% of the coils, but at least two rolls;

to check camber, parameters of surface roughness, decarburization, globcast — 5% rolls, but at least two rolls;

to check the chemical composition of steel — 2% rolls, but at least two rolls.

(Changed edition, Rev. No. 1, 2).

3.4. If unsatisfactory test results of at least one of the indicators it is carried out re-tests on twice the number of rolls of the number does not pass the test. The results of repeated tests apply to the entire party.

(Changed edition, Rev. No. 2).

4. TEST METHODS

4.1. The quality of the surface and the edges of the belt should be inspected visually without the use of magnifying devices. If necessary, the size of the surface defects of the tape is determined by the profilers-profiling according to GOST 19300 and other measuring instruments of appropriate accuracy.

4.2. The thickness of the tape measure with micrometers (GOST 6507 or GOST 4381) and other means of measuring the respective accuracy.

The width of the tape measure with micrometers (GOST 6507 or GOST 4381) or caliper (GOST 166) and other means of measuring the respective accuracy.

4.1, 4.2. (Changed edition, Rev. No. 2).

4.3. The test strip in tension shall be carried out according to GOST 11701. The tape of any thickness, width 20 mm and less experience in the delivery condition; tape width more than 20 mm is cut out a sample width of 20 mm (type 2, short-GOST 11701). The edges of the ribbon samples before testing should be thoroughly sanded.

4.4. Hardness Vickers should be carried out according to GOST 2999.

Tape thickness of 0.25 to 0.40 mm was tested at a load of 49 N (5 kgf), tape thickness more than 0.40 mm at a load of 98 N (10 kgf)

The test shall be carried out in the middle of the sample at three points. The final result should be the arithmetic mean of the results of the three trials.

(Changed edition, Rev. No. 2).

4.5. The test tape at the bend shall be carried out according to GOST 13813. The radius of the rollers of the device must match that specified in the table. 5. The lever arm of the device shall meet the following requirements:

Tape thickness, mm lever arm of the actuator, mm

0,08 — 0,14…

0,15 — 0,26… 6

0,28 — 0,45… 12

0,50 — 0,70… 18

0,80 — 1,00… 24

The edges of the ribbon samples before testing should be thoroughly sanded.

4.6. The parameters of surface roughness of the tape should be determined by using profilers-profiling according to GOST 19300 and other devices of the appropriate accuracy.

(Changed edition, Rev. No. 2).

4.7. Camber strips shall be checked by the overlapping edges of tape sample length of 1 m with a straight line. The measurement is performed in the place of the greatest curvature of the ruler according to GOST 427, a set of probes on the other 2−034−225−87 or other measurement means appropriate accuracy.

(Changed edition, Rev. 2, 3).

4.8. Globcast tape measure on the device design engineer Fedorov N. M. according to the method specified in reference Appendix 2, and other measuring instruments of appropriate accuracy.

Allowed globcast tape with a thickness of 0.25 mm or more and a minimum width of 50 mm to measure calibration lines according to GOST 8026 and a set of probes on the other 2−034−225−87.

(Changed edition, Rev. No. 2, 4).

4.9. Control of the magnitude of decarburization of the tape must be carried out according to GOST 1763. With the consent of the customer is possible to supply the tape without checking bezoperatsionnogo layer.

4.10. Test the tape on the elasticity conducted by the method agreed between the manufacturer and the customer.

4.11. Test tape on the microstructure is carried out according to the procedure agreed between the manufacturer and the consumer.

4.12. The chemical composition of the metal tape is certified by a document of the manufacturer of the metal. If necessary, the chemical composition of the metal strip is determined according to GOST 22536.0 to GOST 22536.9.

For each type of test should be taken one sample from each selected bale.

(Changed edition, Rev. No. 1).

4.13. Weight of packages and, if necessary, rolls of tape, is determined by weights according to GOST 29329, or other scales, providing weighing accuracy to 1%.

(Added, Rev. No. 2).

5. MARKING, PACKAGING, TRANSPORTATION AND STORAGE

5.1. Each roll of ribbon should be tied in at least three places soft metal ribbon or wire according to GOST 3560, GOST 3282 or other regulatory-technical documentation.

The outer end of the tape must be securely fastened.

(Changed edition, Rev. No. 1).

5.2. The tape shall be coated with a corrosion-resistant liquid lubricant type GSD-11, a mixture consisting of a lubricant НГ203 (OST 38.01436) and the spindle oil (GOST 20799) at a ratio of 1:1 or spindle oil (GOST 20799) +15% additive AKOR-1, and other compounds with protective properties equivalent to those listed.

(Changed edition, Rev. No. 3).

5.3. Rolls of tape with a thickness of 0.30 mm and less shall be wrapped with a layer of paper and Packed in tight wooden boxes of the type II according to GOST 18617 or other normative and technical documentation, tins, containers according to normative-technical documentation. When packaging rolls of tape in boxes is permitted to replace wrapping rolls of paper vestiarium boxes of paper. Thus, between the ends of the rolls should be laid strips of paper.

Tape with a thickness of more than 0.30 mm shall be Packed as specified below.

(Changed edition, Rev. No. 1, 4).

5.3. The tape is sent to the far North and remote areas shall be in accordance with the requirements of this standard.

(Added, Rev. No. 4).

5.3.1. Rolls or pile rolls (packs) the tape must be wrapped with a layer of paper, then a layer of polymeric film or fabric and stitched in at least three places soft metal ribbon or wire according to GOST 3560, GOST 3282 or other regulatory-technical documentation.

(Added, Rev. No. 1).

5.3.2. Mechanized packaging

5.3.2.1. The rolls of tape must be wrapped with a layer of cable crepe paper according to GOST or other 10896 crepe paper, equal in protective properties, according to normative-technical documentation, simultaneous recording paper wire according to GOST 3282 or other regulatory-technical documentation.

(Added, Rev. No. 1).

5.3.2.2. The rolls of tape must be covered with a removable inhibited polymer coating made according to normative-technical documentation.

(Changed edition, Rev. No. 1, 2).

5.3.3. The packaging method chosen by the manufacturer.

The quality of packaging materials used:

the waxed paper according to GOST 9569;

paper double-layered wrapping according to GOST 8828;

the waxed paper according to GOST 8273 and the other that provides protection from corrosion — according to normative-technical documentation;

film, the polymer according to GOST 10354, 16272 GOST and other normative and technical documentation;

container holstoproshivny canvas — according to normative-technical documentation and other types of packing fabrics that do not deteriorate the quality of the packaging (except for cotton and linen fabrics), — according to normative-technical documentation, as well as stitched flap from the waste of the textile industry.

(Changed edition, Rev. No. 2).

5.4. Tape transporterowych by all kinds of transport in covered vehicles in accordance with the rules of cargo transportation applicable to the transportation of this type, or in universal containers according to GOST 15102, 20435 GOST, GOST 22225. Consolidation packages in overpacks shall be carried out according to GOST 21650, GOST 24597.

The formation of the transport packet is performed according to GOST 26663. Allowed the formation of packages without the use of pallets.

If you package on pallets rolls or rolls of the foot must be wrapped with a layer of paper and attached to the pallet in at least three places soft metal ribbon or wire according to GOST 3560, GOST 3282 or other regulatory-technical documentation.

For transportation in universal containers allowed packaging tape, paper (except oil) that protects the tape against corrosion.

(Changed edition, Rev. No. 1, 2, 4).

5.5. The gross mass of the Packed tape should be no more than 200 kg, upon the customer’s request gross weight should not exceed 80 kg.

During transportation of packages gross mass — GOST 24597.

(Changed edition, Rev. No. 1, 4).

5.6. To each coil and the cargo should be attached label, which indicate:

trademark or the name and trademark of manufacturer;

the symbol of the tape;

grade of steel;

batch number;

stamp of technical control.

(Changed edition, Rev. No. 2).

5.6. Transport marking under GOST 14192.

While in transport the marking is allowed gross mass and net of each package (roll, box, etc.) to the gross weight of the party.

(Changed edition, Rev. No. 4).

5.7. (Deleted, Rev. No. 1).

5.8. Storage tape should be conducted in accordance with conditions 2 GOST 15150.

(Changed edition, Rev. No. 4).

ANNEX 1
Reference

Table 1

Setlocalint tape

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	11	12	13	14	15	16	18	20	22	23	24	25	23	28	30	32	35	36	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,11	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,12	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,13	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,14	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,15	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,16	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,18	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,24	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,32	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,35	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,36	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,40	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,45	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,50	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,55	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,60	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,63	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,65	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,70	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,80	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,90	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1,0	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1,1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1,2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Table 2

Setlocalint ribbon with the colors of a tint

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	Eleven	12	13	14	15	16	18	20	52	23	24	25	26	28	30	32	35	36	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,11	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,12	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,13	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,14	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,15	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,16	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,18	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,24	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,32	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,35	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,36	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,40	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,45	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,50	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,55	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,60	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,63	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,65	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,70	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,80	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,90	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,0	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,1	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,2	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
1,3	-	-	-	-	-	-	-	-	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+

Table 3

Polished and khlorisana tape

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	11	12	13	14	15	16	18	20	22	23	24	25	26	28	30	32	35	35	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,11	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,12	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,13	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,14	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,15	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,16	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,18	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,24	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,32	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,35	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,36	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,40	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,45	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,50	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,55	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,60	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+
0,63	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,65	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,70	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,80	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,90	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+			-	-	-	-	-	-	-	-
1,0	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-
1,1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1,2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
1,3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Table 4

Dark tape

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	11	12	13	14	15	Sixteen	18	20	22	23	24	25	26	28	30	32	35	36	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,11	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,12	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,13	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,14	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,15	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,16	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,18	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,21	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,32	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,35	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,36	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,40	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,45	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,50	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,55	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,60	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,63	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,65	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,70	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,80	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
0,90	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
1,0	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
1,1	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
1,2	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-
1,3	-	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-

Table 5

Ribbon with finished edges

Tape thickness, mm	Tape width, mm
	5	6	7	8	9	10	11	12	13	14	15	16	18	20	22	23	24	25	26	28	30	32	35	36	38	40	45	50	55	60	65	70	74	75	76	80	83	85	90	100
0,05	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,055	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,06	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,07	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,08	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,09	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,10	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,11	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,12	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,13	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,14	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,15	-	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,16	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,18	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,20	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,22	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,24	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,25	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+			-	-	-	-	-	-	-	-	-	-	-	-	-	-
0,26	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,28	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-	-
0,30	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,32	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,35	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,36	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,40	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,45	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,50	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,55	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,60	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,63	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,65	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,70	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,80	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
0,90	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
1,0	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-
1,1	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-
1,2	-	-	-	-	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	+	-	-	-	-	-	-	-	-	-	-	-
1,3	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

ANNEX 2
Reference

THE METHOD OF MEASURING GLOBCAST HEAT-TREATED RIBBON
THE INSTRUMENT DESIGN ENGINEER FEDOROV N. M.

1. Sample preparation of the tape

Samples of the tape cut off with sharp scissors perpendicular to the edges of the belt. Length samples of 200 ± 5 mm. Burrs on the edges of the belt in the middle of the sample (at the point of contact with the range of the instrument) should be removed with sandpaper. Samples setlocale and sweetlovelybunny tape needs to be degreased, samples setlocale with the colors of a tint, colorsound and black ribbon needs to be sanded in contact with the measuring tip and a ruler.

2. Measurement of globcast

The prepared sample of the ribbon is fixed in the clamp of the suspension, so the tape was based on a radial line edges, the edge tip is supplied through movement microvita to the contact of the tip with the top of the trough (position A). Thus the measured value of the trough together with the thickness of the tape. The moment of contact of the tip of the fixed lighting of lamps. Then the sample on the suspension turns 180° and is applied to the top of the chute to the line (position B). In this measured sample thickness of the tape. Measuring tip must be pointed and positioned precisely flush with the edge of the circle line.

Globcast sample is determined by the difference of the measurements in positions A and B.

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR

2. APPROVED AND promulgated by the Decree of the State Committee of standards of Ministerial Council of the USSR from 12.07.76 No. 1694

3. INSTEAD, GOST 2614−65 in part of the cold strip

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

The designation of the reference document referenced	The number of the paragraph, subparagraph, enumeration, applications	The designation of the reference document referenced	The number of the paragraph, subparagraph, enumeration, applications
GOST 166−89	4.2	GOST 15171−78	5.2
GOST 427−75	4.7	GOST 16272−79	5.3.3
GOST 1050−88	2.1	GOST 18617−83	5.3
GOST 1435−99	2.1	GOST 19300−86	4.1, 4.6
GOST 1763−68	4.9	GOST 20435−75	5.4
GOST 2789−73	2.6, 2.10	GOST 20799−88	5.2
GOST 2999−75	4.4	GOST 21650−76	5.4
GOST 3282−74	5.1, 5.3.1, 5.3.2.1, 5.4	GOST 22225−76	5.4
GOST 3560−73	5.1, 5.3.1, 5.4	GOST 22536.0−87	4.12
GOST 4381−87	4.2	GOST 22536.1−88	4.12
GOST 5950−2000	2.1	GOST 22536.2−87	4.12
GOST 6507−90	4.2	GOST 22536.3−88	4.12
GOST 8026−92	4.8	GOST 22536.4−88	4.12
GOST 8273−75	5.3.3	GOST 22536.5−87	4.12
GOST 8828−89	5.3.3	GOST 22536.6−88	4.12
GOST 9569−79	5.3.3	GOST 22536.7−88	4.12
GOST 10354−82	5.3.3	GOST 22536.8−87	4.12
GOST 10396−84	5.3.2.1	GOST 22536.9−88	4.12
GOST 11701−84	4.3	GOST 24597−81	5.4, 5.5
GOST 13813−68	4.5	GOST 26663−85	5.4
GOST 14192−96	5.6	GOST 29329−92	4.13
GOST 14959−79	2.1	THAT 2−034−225−87	4.7, 4.8
GOST 15102−75	5.4	OST 38.01436−87	5.2
GOST 15150−69	5.8

5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from 29.12.91 No. 2369

6. EDITION with Amendments No. 1, 2, 3, 4, approved in December 1982, June 1987, August 1989, December 1991 (IUS 3−83, 10−87, 12−89, 5−92)