GOST 1761-2016

• gost-1761-2016.pdf (1.52 MiB)
  ГОСТ 1761-2016

GOST 1761−2016 the and Strips, of tin-phosphorus and tin-zinc bronze. Technical specifications (with Amendment)

GOST 1761−2016

Group В53

INTERSTATE STANDARD

THE AND STRIPS, OF TIN-PHOSPHORUS AND TIN-ZINC BRONZE

Specifications

The Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

ISS 77.150.99
GST 18 4600

Date of introduction 2017−04−01

Preface

Goals, basic principles and main procedure of works on interstate standardization have been established in GOST 1.0−2015 «interstate standardization system. Basic provisions» and GOST 1.2−2015 «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. Rules of development, adoption, renewal and cancellation"

Data on standard

1 DEVELOPED by the Technical Committee for standardization TC 106 «Tsvetmetprokat», Scientific-research, project and design Institute for alloys and processing of nonferrous metals «Joint-stock company «Institute tsvetmetobrabotka» (JSC «Institute tsvetmetobrabotka»)

2 as AMENDED by the Federal Agency for technical regulation and Metrology (Rosstandart)

3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol dated February 29, 2016 N 85-P)

The adoption voted:

4 by Order of the Federal Agency for technical regulation and Metrology, dated 22 August 2016 N 928-St inter-state standard GOST 1761−2016 introduced as a national standard of the Russian Federation from April 1, 2017

5 REPLACE GOST 1761−92

Information about the changes to this standard is published in the annual reference index «National standards», and the text changes and amendments — in monthly information index «National standards». In case of revision (replacement) or cancellation of this standard a notification will be published in the monthly information index «National standards». Relevant information, notification and lyrics are also posted in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet (www.gost.ru)

AMENDED, published in the IUS N 1, 2017

An amendment made by the manufacturer of the database

1 Scope

This standard applies to cold rolled strips and tapes used for the manufacture of elastic elements, parts, appliances, machines and devices.

2 Normative references

This standard uses the regulatory references to the following international standards:

GOST 166−89 (ISO 3599−76) Calipers. Specifications

(Amendment. ICS N 1−2017).

GOST 427−75 Rulers measuring metal. Specifications

GOST 1497−84 (ISO 6892−84) Metals. Test methods tensile

GOST 1953.1−79 Bronze tin. Methods for determination of copper

GOST 1953.2−79 Bronze tin. Methods for determination of lead

GOST 1953.3−79 Bronze tin. Methods for determination of tin

GOST 1953.4−79 Bronze tin. Methods for determination of phosphorus

GOST 1953.5−79 Bronze tin. Methods for determination of Nickel

GOST 1953.6−79 Bronze tin. Methods for determination of zinc

GOST 1953.7−79 Bronze tin. Methods of iron determination

GOST 1953.8−79 Bronze tin. Methods for determination of aluminium

GOST 1953.9−79 Bronze tin. Methods for determination of silicon

GOST 1953.10−79 Bronze tin. Methods for determination of antimony

GOST 1953.11−79 Bronze tin. Methods for determination of bismuth

GOST 1953.12−79 Bronze tin. Methods of determining sulphur

GOST 2991−85 wooden disposable Boxes for loads up to 500 kg. General specifications

The Wire GOST 3282−74 General purpose low carbon steel. Specifications

GOST 3560−73 package steel Strip. Specifications

GOST 5017−2006 Bronze tin pressure treated. Brand

GOST 6507−90 Micrometers. Specifications

GOST 7502−98 metallic measuring tape. Specifications

GOST 9557−87 flat wooden Pallet size 800x1200 mm. specifications

GOST 9569−2006 waxed Paper. Specifications

GOST 9696−82 multi-turn Indicators with a scale division of 0.001 and 0.002 mm. specifications

GOST 10198−91 wooden Boxes for goods of mass over 200 up to 20000 kg. General specifications

GOST 11701−84 Metals. Methods tensile tests of thin sheets and strips

GOST 14192−96 Marking of cargo

GOST 15102−75 the universal metal closed Container of nominal gross mass 5,0 t Technical specifications

GOST 15846−2002 Products that are sent to the far North regions and equated areas. Packing, marking, transportation and storage

GOST 18242−72Statistical acceptance inspection by alternative feature. Plans control

________________

On the territory of the Russian Federation GOST R ISO 2859−1-2007"Statistical methods. Procedure sampling on alternative grounds. Part 1. Sampling plans consistent parties on the basis of an acceptable level of quality."


GOST 18321−73 Statistical quality control. Methods of random selection of piece products

GOST 18477−79 Containers are universal. The types, basic parameters and dimensions

GOST 20435−75 the universal metal closed Container of nominal gross mass 3,0 t specifications

GOST 21140−88 Tara. System sizes

GOST 21650−76 means of fastening of package cargoes in transport packages. General requirements

GOST 22225−76 universal Containers with a gross weight 0,625 and 1,25 t. specifications

GOST 24047−80 Semi-finished products from nonferrous metals and their alloys. Sampling for tensile test

GOST 24231−80 non-ferrous metals and alloys. General requirements to selection and preparation of samples for chemical analysis

GOST 25086−2011 non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 26663−85 transport Packs. Formation with the use of packaging. General technical requirements

GOST 26877−2008 metal Products. Methods of measuring form deviations of

GOST 32597−2013 Copper and copper alloys. Types of defects of billets and semi-finished

ST SEV 543−77 Number. Record rules and rounding

Note — When using this standard appropriate to test the effect of reference standards in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet or in the annual information index «National standards» published as on January 1 of the current year, and the editions of the monthly information index «National standards» for the current year. If the reference standard is replaced (changed), when using this standard should be guided by replacing (amended) standard. If the reference standard is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.

3 Terms and definitions

3.1 this standard applies the terminology according to GOST 32597.

4 Assortment

4.1 thickness of the strips and limit deviations on thickness shall be as specified in table 1.

Table 1

In millimeters

4.2 line widths and tolerances for the width should correspond to those in table 2.

Table 2

In millimeters

4.3 Band made:

— bronze brand Brof6,5−0,15 — in length from 800 to 2000 mm;

— bronze brand Broc4−3 — length from 800 to 1600 mm.

Stripes are made with variable length, measuring with an interval of 100 mm and multiple of gauging length within off-gage.

Maximum deviation for the length of the strip dimensional and multiple lengths shall not exceed plus of 10.0 mm.

At the request of the consumer strip gauging and multiple of gauging length with a thickness of more than 3.00 mm produce extreme deviations in length plus not more than 6.0 mm.

By agreement between manufacturer and the consumer bands are made with a length from 400 to 800 mm.

4.4 the thickness of the tapes and tolerances for thickness shall be as specified in table 3.

Table 3

In millimeters

4.5 Width of the strips and limit deviations on width shall be as specified in table 4.

Table 4

In millimeters