GOST 3845-2017
GOST 3845−2017 Pipe metal. Test method internal hydrostatic pressure
GOST 3845−2017
Group В69
INTERSTATE STANDARD
PIPE METAL
Test method internal hydrostatic pressure
Metallic pipes. Internal hydrostatic pressure testing method
ISS 23.040.10
Date of introduction 2017−09−01
Preface
Goals, basic principles and main procedure of works on interstate standardization established in GOST 1.0−2015 «interstate standardization system. Basic provisions» and GOST 1.2−2015 «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. Rules of development, adoption, renewal and cancellation"
Data on standard
1 DEVELOPED by the Open joint stock company «Russian scientific research Institute of pipe industry» (JSC «RosNITI»)
2 SUBMITTED by the Technical Committee for standardization TC 357 «Steel and cast iron pipes and cylinders"
3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol dated 28 February 2017 N 96-P)
The adoption voted:
Short name of the country on MK (ISO 3166) 004−97 |
Country code, pomc (ISO 3166) 004−97 | Abbreviated name of the national authority for standardization |
Armenia |
AM | Ministry Of Economy Of The Republic Of Armenia |
Belarus | BY | Gosstandart Of The Republic Of Belarus |
Kyrgyzstan | KG | Kyrgyzstandard |
Kazakhstan | KZ | Gosstandart Of The Republic Of Kazakhstan |
Russia | EN | Rosstandart |
Ukraine | UA | The Ministry Of Economic Development Of Ukraine |
4 by Order of the Federal Agency for technical regulation and Metrology dated March 21, 2017 N 165th St interstate standard GOST 3845−2017 introduced as a national standard of the Russian Federation from 1 September 2017
5 REPLACE GOST 3845−75
Information about the changes to this standard is published in the annual reference index «National standards» (as of January 1 of the current year), and the text changes and amendments — in monthly information index «National standards». In case of revision (replacement) or cancellation of this standard a notification will be published in the monthly information index «National standards». Relevant information, notification and lyrics are also posted in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet (www.gost.ru)
1 Scope
This standard specifies the test method of metallic seamless, welded, certapay pipes, including a bimetallic pipe, made of steel, cast iron, alloys and non-ferrous metals, an internal hydrostatic pressure to confirm their ability to withstand the test pressure. Test method internal hydrostatic pressure is the impact on stationary test tube environment under pressure.
2 Normative references
This standard uses the regulatory references to the following international standards: