GOST 19067-80
GOST 19067−80 replaceable cutting Inserts carbide faceted hexagonal shape with hole. The design and dimensions (with Change No. 1)
GOST 19067−80
Group 56
INTERSTATE STANDARD
CUTTING INSERTS, INDEXABLE MULTI-FACETED
CARBIDE HEXAGONAL SHAPE WITH HOLE
The design and dimensions
Hexagon throw-away (indexable) carbide cutting
inserts with cylindrical holes. Design and dimensions
ISS 25.100
77.160
OKP 19 6000
Date of introduction 1982−01−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from
3. REPLACE GOST 19067−73
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 19042−80 |
3 |
| GOST 19086−80 |
4 |
5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from
6. EDITION with Change No. 1, approved in December 1990 (IUS 4−91)
The requirements of this standard are mandatory.
(Added, Rev. N 1).
1. The design and dimensions of plates shall be as specified in the drawing and in the table.
________________
* Size for reference.
mm
| The marking plates of classes of tolerances |
|||||||||||
| U |
G |
||||||||||
| digital | alpha digital |
When- me- the cost |
digital | alpha digital |
When- me- the cost |
||||||
| 11113−090408 | HNUA-090408 | 11133−090408 | HNGA-090408 | 9,1 | 15,875 | 4,76 | 6.35 mm | 0,8 |
1,106 | ||
| - | - | 11133−090416 | HNGA-090416 | 1,6 |
0,983 | ||||||
| 11113−110412 | HNUA-110412 | 11133−110412 | HNGA-110412 | 11,0 | 19,050 | Of 7.93 | 1,2 | 1,290 | |||
| - | - | 11133−110420 | HNGA-110420 | 2,0 |
1,168 | ||||||
| 11113−110612 | HNUA-110612 | 11133−110612 | HNGA-110612 | 6.35 mm |
1,2 | 1,290 | |||||
| - | - | 11133−110620 | HNGA-110620 | 2,0 |
1,168 | ||||||
| 11113−120612 | HNUA-120612 | - | - | 12,8 |
22,200 | 1,2 | 1,534 | ||||
Example of designation when ordering plates of hard alloy VK6 brand, class of admission U, with cutting edge length =9.1 mm, thickness
=4.76 mm, radius
=0,8 mm:
19 6524
0394 090408
2. Approximate weight plates specified in Appendix 1.
3. The notation of plates according to GOST 19042.
4. Technical requirements — GOST 19086.
5. Applicable grades listed in Appendix 2.
(Added, Rev. N 1).
ANNEX 1
Reference
| Digital signage plates | Approximate weight of plates, g, of a solid alloy grades | |||
| VK6 |
Т5К10 | Т14К8 | T15K6 | |
| 11113−090408 |
13,1 | 11,4 | 10,3 | The 10.1 |
| 11133−090408 |
||||
| 11133−090416 |
13,1 | 11,3 | 10,3 | The 10.1 |
| 11133−110412 |
18,6 | 16,1 | 14,6 | 14,3 |
| 11113−110412 | ||||
| 11133−110420 |
18,6 | 16,1 | 14,6 | 14,3 |
| 11113−110612 |
24,9 | 21,5 | 19,5 | 19,1 |
| 11133−110612 | ||||
| 11133−110620 |
24,8 | 21,4 | 19,4 | 19,1 |
| 11113−120612 |
35,4 | 30,6 | 27,8 | 27,3 |
APPENDIX 1. (Changed edition, Rev. N 1).
APPENDIX 2 (recommended). Applied grades of plates
ANNEX 2
Recommended
| Digital signage plates | The main application |
Application by special order |
| 11113−090408 |
N 5, N 7 | N 3, N 6 |
| 11133−090408 | ||
| 11133−090416 | - | N 3, N 5, N 6, N 7 |
| 11113−110412 | N 5 | N 3, N 6, N 7 |
| 11133−110412 | - | N 3, N 5, N 6, N 7 |
| 11133−110420 |
N 3, N 5, N 6, N 7 | |
| 11113−110612 |
||
| 11133−110612 | ||
| 11133−110620 |
||
| 11113−120612 |
N 3 — VK6; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6.
APPENDIX 2. (Added, Rev. N 1).
