GOST 19064-80
GOST 19064−80 cutting Inserts, replaceable carbide faceted irregular Pentagon shape with a hole. The design and dimensions (with Amendments No. 1, 2)
GOST 19064−80
Group 56
INTERSTATE STANDARD
CUTTING INSERTS, INDEXABLE MULTI-FACETED
CARBIDE IRREGULAR PENTAGON SHAPE WITH A HOLE
The design and dimensions
Pentagon throw-away (indexable) carbide cutting
inserts with cylindrical holes. Design and dimensions
ISS 25.100
77.160
OKP 19 6000
Date of introduction 1982−01−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of ferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from
3. REPLACE GOST 19064−73
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 19042−80 |
3 |
| GOST 19086−80 |
4 |
5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from
6. EDITION with Amendments No. 1, 2 approved in October 1984, December 1990 (IUS 2−85, 4−91)
The requirements of this standard are mandatory.
(Added, Rev. N 2).
1. The design and dimensions of plates shall be as specified in the drawing and in the table.
________________
* Size for reference.
mm
| Marking plates class U tolerance |
||||||||
| digital | alpha digital |
Applicability |
||||||
| 10113−110408 |
PNUA-110408 | 11,5 | 15,875 | 6.35 mm | 4,76 | 0,8 | 17,562 | |
| - | - |
1,6 | 17,375 | |||||
| 10113−130412 |
PNUA-130412 | 13,8 | 19,050 | Of 7.93 | 1,2 | 21,019 | ||
| - |
- | 2,0 | 20,832 | |||||
| 10113−130612 |
The PNUА-130612 | 6.35 mm | 1,2 | 21,019 | ||||
| - |
- | 16,1 | 22,200 | 2,0 | 20,832 | |||
| 10113−160612 |
PSUA-160612 | 1,2 | 24,541 | |||||
Continued
mm
| The marking plates of class of tolerance M |
||||||||
| digital | alpha digital |
Applicability |
||||||
| 10123−110408 | PNMA-110408 |
11,5 | 15,875 | 6.35 mm | 4,76 | 0,8 | 17,562 | |
| - | - |
1,6 | 17,375 | |||||
| 10123−130412 | PNMA-130412 |
13,8 | 19,050 | Of 7.93 | 1,2 | 21,019 | ||
| - | - |
2,0 | 20,832 | |||||
| 10123−130612 | PNMA-130612 | 6.35 mm | 1,2 | 21,019 | ||||
| - | - | 16,1 |
22,200 | 2,0 | 20,832 | |||
| 10123−160612 | PNMA-160612 |
1,2 | 24,541 | |||||
Continued
mm
| The marking plates of class a tolerance E |
||||||||
| digital | alpha digital |
Applicability |
||||||
| 10153−110408 |
PNEA-110408 | 11,5 | 15,875 | 6.35 mm | 4,76 | 0,8 | 17,562 | |
| 10153−110416 | PNEA-110416 |
1,6 | 17,375 | |||||
| 10153−130412 | PNEA-130412 |
13,8 | 19,050 | Of 7.93 | 1,2 | 21,019 | ||
| 10153−130420 | PNEA-130420 |
2,0 | 20,832 | |||||
| 10153−130612 | PNEA-130612 |
6.35 mm | 1,2 | 21,019 | ||||
| 10153−130620 | PNEA-130620 |
2,0 | 20,832 | |||||
| - | - |
16,1 | 22,200 | 1,2 | 24,541 | |||
Example of designation when ordering plates of hard alloy VK6 brand, class of admission U, with cutting edge length =11.5 mm, thickness
=4.76 mm and radius
=0,8 mm:
19 6524
0388 110408
2. Approximate weight plates specified in Appendix 1.
3. The notation of plates according to GOST 19042.
4. Technical requirements — GOST 19086.
5. Applicable grades listed in Appendix 2.
(Added, Rev. N 2).
ANNEX 1
Reference
Approximate weight plates
| Approximate weight of plates, g | ||||||||||
| Digital signage plates | carbide grades | of tungsten carbide grades |
made of hard alloys coated | |||||||
| VK6 | VK8 | Т5К10 | Т14К8 | T15K6 | КНТ16 | ТН20 | ВП1255 |
ВП3115 | ВП3325 | |
| 10113−110408 | 13,9 | 13,7 | 12,0 | 10,9 | 10,7 | The 5.39 | - | 12,60 |
13,90 | Of 13.70 |
| 10123−110408 |
- | - | ||||||||
| 10153−110408 |
- | The 5.39 | ||||||||
| 10153−110416 |
13,8 | 13,6 | 11,9 | 10,8 | 10,6 | - | 5,36 | 12,64 | 13,80 | 13,60 |
| 10113−130412 |
19,7 | 19,4 | 17,0 | 15,4 | 15,2 | - | - | 18,04 | 19,70 | 19,40 |
| 10123−130412 |
- | - | ||||||||
| 10153−130412 |
- | 7,64 | ||||||||
| 10153−130420 |
19,6 | 19,3 | 17,0 | 15,4 | 15,1 | - | 7,59 | 17,94 | 19,60 | 19,30 |
| 10113−130612 |
26,3 | 25,9 | 22,7 | 20,6 | 20,2 | - | - | 24,08 | Of 26.30 | 25,90 |
| 10123−130612 |
- | - | ||||||||
| 10153−130612 |
- | 10,20 | ||||||||
| 10153−130620 |
26,1 | 25,8 | 22,6 | 20,5 | 20,1 | - | 10,10 | Of 24.07 | 26,10 | 25,80 |
| 10113−160612 |
37,4 | 36,8 | 32,3 | 29,3 | 28,8 | - | - | 34,22 | 37,40 | 36,80 |
| 10123−160612 |
- | - | ||||||||
APPENDIX 1. (Changed edition, Rev. N 2).
APPENDIX 2 (recommended). Applied grades of plates
ANNEX 2
Recommended
| Digital signage plates |
The main application | Addi- tional application |
Application by special order |
| 10113−110408 | N 3, N 4, N 5, N 6, N 7, N 8, N 9, N 11 |
N 10 | - |
| 10123−110408 | N 4, N 5, N 6, N 7 |
- | N 3, N 8, N 9, N 10, N 11 |
| 10153−110408 | N 3, N 4, N 5, N 6, N 7, N 11 |
- | N 8, N 9, N 10 |
| 10153−110416 | N 3, N 4, N 7, N 11 | N 6, N 9, N 10 | N 5, N 8 |
| 10113−130412 | N 4, N 7 |
N 6 | N 3, N 5, N 9, N 10, N 11 |
| 10123−130412 | N 7 | - | N 3, N 4, N 5, N 6, N 9, N 10, N 11 |
| 10153−130412 | - | N 5 | N 3, N 4, N 6, N 7, N 8, N 9, N 10, N 11 |
| 10153−130420 |
N 5, N 7, N 11 | N 6 | N 3, N 4, N 8, N 9, N 10 |
| 10113−130612 |
N 4, N 5, N 6, N 11 | - | N 3, N 7, N 9, N 10 |
| 10123−130612 | N 5, N 7 | - | N 3, N 4, N 6, N 9, N 10, N 11 |
| 10153−130612 |
N 3, N 4, N 5, N 7, N 11 | N 6 | N 8, N 9, N 10 |
| 10153−130620 | - | N 5 | N 3, N 4, N 6, N 7, N 8, N 9, N 10, N 11 |
| 10113−160612 | N 4, N 5, N 10, N 11 | N 6 | N 3, N 7, N 9 |
| 10123−160612 | N 5, N 6, N 7 |
- | N 3, N 4, N 9, N 10, N 11 |
N 3 — VK6; N 4 — VK8; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6; N 8 — КНТ16, ТН20; N 9 — ВП3115; N 10 — ВП3325; N 11 — ВП1255.
APPENDIX 2. (Added, Rev. N 2).
