GOST 19062-80
GOST 19062−80 cutting Inserts, replaceable carbide faceted parallelogram shape with an angle of 55° and a chip breaking C-grooves on one side. The design and dimensions (with Change No. 1)
GOST 19062−80
Group 56
INTERSTATE STANDARD
CUTTING INSERTS, REPLACEABLE CARBIDE FACETED
PARALLELOGRAM SHAPE WITH AN ANGLE OF 55° AND A CHIP BREAKING C —
GROOVES ON ONE SIDE
The design and dimensions
Parallelogram throw-away (indexable) carbide cutting inserts with 55° included
angle and chip-breaking flutes on one face only. Design and dimensions
ISS 25.100
77.160
OKP 19 6000
Date of introduction 1982−01−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from
3. REPLACE GOST 19062−73
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 19042−80 |
3 |
| GOST 19086−80 |
4 |
5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from
6. EDITION with Change No. 1, approved in December 1990 (IUS 4−91)
The requirements of this standard are mandatory.
(Added, Rev. N 1).
1. The design and dimensions of plates shall be as specified in the drawing and in the table.
________________
* Size for reference.
mm
| Marking the plastic of the tolerance class of U |
|||||||||||
| right |
left | ||||||||||
| digital | alphanumeric | When- me- believe it- the cost |
digital | alphanumeric | When- me- believe it- the cost |
||||||
| 08116−170405−130 |
KNUX-170405R30 | 08116−170405−230 |
KNUX-170405L30 |
17 | 14 | 10 | 4,8 | 0,5 | 0,3 | ||
| 08116−170410−130 |
KNUX-170410R30 |
08116−170410−230 |
KNUX-170410L30 |
1,0 | |||||||
| 08116−170410−136 |
KNUX-170410R36 | 08116−170410−236 | KNUX-170410L36 |
3,6 | |||||||
| 08116−170415−130 |
KNUX-170415R30 | 08116−170415−230 | KNUX-170415L30 |
1,5 | 3,0 | ||||||
| 08116−170415−136 |
KNUX-170415R36 | 08116−170415−236 | KNUX-170415L36 | 3,6 | |||||||
| 08116−190605−130 |
KNUX-190605R30 | 08116−190605−230 |
KNUX-190605L30 |
19 | 16 | 6,3 | 0,5 | 3,0 | |||
| 08116−190610−130 |
KNUX-190610R30 | 08116−190610−230 |
KNUX-190610L30 |
1,0 | |||||||
| 08116−190610−136 |
KNUX-190610R36 |
08116−190610−236 | KNUX-190610L36 | 3,6 | |||||||
| 08116−190615−130 |
KNUX-190615R30 |
08116−190615−230 |
KNUX-190615L30 | 1,5 | 3,0 | ||||||
| 08116−190615−136 |
KNUX-190615R36 |
08116−190615−236 | KNUX-190615L36 |
3,6 | |||||||
Example of designation when ordering plates of hard alloy VK6 brand, with cutting edge length =17 mm, radius
=0.5 mm, right:
19 6524
0385 170405−130
Same, left:
19 6511
0385 170405−230
2. The shape and dimensions of a chip breaking C-grooves are provided in Annex 1.
3. Approximate weight plates are given in Appendix 2.
4. The notation of plates according to GOST 19042.
5. Technical requirements — GOST 19086.
6. Applied alloys is given in Appendix 3.
(Added, Rev. N 1).
ANNEX 1
Recommended
The shape and dimensions of a chip breaking C-grooves on the front surfaces of the plates.
ANNEX 2 (informative)
ANNEX 2
Reference
| Digital signage plates | Approximate weight of plates, g, of a solid alloy grades | ||||
| VK6 | VK8 | Т5К10 | Т14К8 | T15K6 | |
| 08116−170405−130 |
10,3 | 10,20 | Of 8.94 | 8,11 | 7,97 |
| 08116−170405−230 |
|||||
| 08116−170410−130 |
10,3 | 10,10 | Of 8.87 | 8,04 | 7,90 |
| 08116−170410−230 |
|||||
| 08116−170410−136 |
10,3 | 10,20 | 8,92 | 8,08 | Of 7.94 |
| 08116−170410−236 |
|||||
| 08116−170415−130 |
The 10.1 | Of 9.97 | Is 8.74 | 7,92 | 7,79 |
| 08116−170415−230 |
|||||
| 08116−170415−136 |
10,2 | 10,00 | 8,79 | 7,97 | 7,83 |
| 08116−170415−236 |
|||||
| 08116−190605−130 |
16,1 | 15,90 | 13,90 | 12,60 | Of 12.40 |
| 08116−190605−230 |
|||||
| 08116−190610−130 |
16,0 | 15,70 | 13,80 | 12,50 | 12,30 |
| 08116−190610−230 |
|||||
| 08116−190610−136 |
16,0 | 15,80 | 13,80 | 12,50 | 12,30 |
| 08116−190610−236 |
|||||
| 08116−190615−130 |
15,8 | 15,60 | 13,60 | Of 12.40 | 12,10 |
| 08116−190615−230 |
|||||
| 08116−190615−136 |
15,8 | 15,60 | Of 13.70 | Of 12.40 | 12,20 |
| 08116−190615−236 |
|||||
APPENDIX 2. (Changed edition, Rev. 1).
APPENDIX 3 (recommended). Applied grades of plates
APPENDIX 3
Recommended
| Digital signage plates |
The main application | Application by special order |
| 08116−170405−130 |
- | N 3, N 4, N 5, N 6, N 7 |
| 08116−170405−230 | ||
| 08116−170410−130 |
||
| 08116−170410−230 | ||
| 08116−170410−136 |
||
| 08116−170410−236 | ||
| 08116−170415−130 |
||
| 08116−170415−230 |
||
| 08116−190605−130 |
||
| 08116−190605−230 | ||
| 08116−190610−130 |
N 4, N 5, N 6, N 7 | N 3 |
| 08116−190610−230 |
- | N 3, N 4, N 5, N 6, N 7 |
| 08116−190610−136 |
N 4, N 5, N 6, N 7 | N 3 |
| 08116−190610−236 |
- | N 3, N 4, N 5, N 6, N 7 |
| 08116−190615−130 |
N 3, N 4, N 5, N 6, N 7 | |
| 08116−190615−230 | ||
| 08116−190615−136 |
||
| 08116−190615−236 | ||
| 08116−170415−136 |
N 3, N 4, N 5, N 6, N 7 | |
| 08116−170415−236 |
N 3 — VK6; N 4 — VK8; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6.
APPENDIX 3. (Added, Rev. N 1).
