GOST 19047-80
GOST 19047−80 replaceable cutting Inserts carbide faceted hexagonal shape with an angle of 80° and a hole. The design and dimensions (with Change No. 1)
GOST 19047−80
Group 56
INTERSTATE STANDARD
CUTTING INSERTS, REPLACEABLE CARBIDE FACETED
HEXAGONAL SHAPE WITH AN ANGLE OF 80° AND A HOLE
The design and dimensions
Hexagon throw-away (indexable) carbide cutting
inserts with 80° included angle and cylindrical holes.
Design and dimensions
ISS 25.100
77.160
OKP 19 6000
Date of introduction 1982−01−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from
3. REPLACE GOST 19047−73
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 19042−80 |
4 |
| GOST 19086−80 |
5 |
5. The expiration time limit is removed by the Resolution of Gosstandard dated
6. EDITION with Change No. 1, approved in December 1990 (IUS 4−91)
The requirements of this standard are mandatory.
(Added, Rev. N 1).
1. The design and dimensions of plates shall be as specified in the drawing and in the table.
________________
* Size for reference.
mm
| Marking plates class U tolerance |
||||||||
| digital | alphanumeric |
Applicability* |
||||||
| 02113−060304 |
WNUA-060304 |
6,5 | 9,525 | 3,81 | 3,18 | 0,4 | 2,424 | |
| 02113−060308 |
WNUA-060308 |
0,8 | 2,202 | |||||
| 02113−080404 |
WNUA-080404 |
8,7 | 12,700 | 5,16 | 4,76 | 0,4 | 3,306 | |
| 02113−080408 |
WNUA-080408 |
0,8 | 3,084 | |||||
| 02113−100408 |
WNUA-100408 |
10,8 | 15,875 | 6.35 mm | 0,8 | 3,966 | ||
| 02113−100412 |
WNUA-100412 |
1,2 | 3,743 | |||||
| 02113−100608 |
WNUA-100608 |
6.35 mm | 0,8 | 3,966 | ||||
| 02113−100612 |
WNUA-100612 |
1,2 | 3,743 | |||||
| 02113−120612 |
WNUA-120612 |
12,8 | 19,050 | Of 7.93 | 1,2 | 4,625 | ||
Example of designation when ordering plates of hard alloy VK6 brand, with cutting edge length =6.5 mm, thickness
=3.18 mm radius
=0.4 mm:
19 6524
0361 060304
(Changed edition, Rev. N 1).
2. Approximate weight plates specified in Appendix 1.
3. The notation of plates according to GOST 19042.
4. Technical requirements — GOST 19086.
5. Applicable grades listed in Appendix 2.
(Added, Rev. N 1).
ANNEX 1
Reference
Approximate weight plates
| Digital signage plates |
Approximate weight of plates, g | ||||||
| carbide grades |
hard alloy coated | ||||||
| VK6 |
VK8 | Т5К10 | T15K6 | ВП1255 | ВП3115 | ВП3325 | |
| 02113−060304 |
3,84 | 3,79 | 3,32 | 2,96 | 3,52 | 3,84 | 3,79 |
| 02113−060308 |
3,82 | 3,76 | 3,30 | 2,94 | 3,49 | 3,82 | 3,76 |
| 02113−080404 |
10,20 | 10,00 | 8,80 | 7,84 | 9,30 | 10,20 | 10,00 |
| 02113−080408 |
10,10 | 10,00 | 8,77 | 7,81 | 9,30 | 10,10 | 10,00 |
| 02113−100408 |
15,90 | 15,70 | 13,80 | 12,20 | Of 14.60 | 15,90 | 15,70 |
| 02113−100412 |
15,90 | 15,70 | Of 13.70 | 12,20 | Of 14.60 | 15,90 | 15,70 |
| 02113−100608 |
21,30 | 21,00 | 18,40 | 16,40 | 19,53 | 21,30 | 21,00 |
| 02113−100612 |
21,20 | 20,90 | 18,30 | 16,30 | Of 19.43 | 21,20 | 20,90 |
| 02113−120612 |
30,20 | 29,80 | 26,10 | 23,30 | - | - | - |
APPENDIX 1. (Changed edition, Rev. N 1).
APPENDIX 2 (recommended). Applied grades of plates
ANNEX 2
Recommended
| Digital signage plates | The main application | Applies to special order | Additional application |
| 02113−060304 |
N 4, N 7 | N 3, N 5, N 9, N 10, N 11 | - |
| 02113−060308 |
- | N 3, N 4, N 5, N 7, N 9, N 10, N 11 |
|
| 02113−080404 |
N 4, N 7 | N 3, N 5, N 9, N 10, N 11 | |
| 02113−080408 |
N 4, N 5, N 7 | N 3, N 9, N 10, N 11 | |
| 02113−100412 |
N 4 | N 3, N 5, N 9, N 10, N 11 | N 7 |
| 02113−100608 |
N 4, N 5, N 7 | N 3, N 9, N 10, N 11 | - |
| 02113−100612 |
N 4, N 7 | N 3, N 5, N 9, N 10, N 11 | |
| 02113−120612 |
N 5, N 7 | N 3, N 4 | |
| 02113−100408 |
N 4, N 5, N 7 | N 3, N 9, N 10, N 11 |
N 3 — VK6; N 4 — VK8; N 5 — ТК10; N 7 — T15K6; N 9 — ВП3115; N 10 — ВП3325; N 11 — ВП1255.
APPENDIX 2. (Added, Rev. N 1).
