GOST 13833-77

• gost-13833-77.pdf (121.64 KiB)
  ГОСТ 13833-77

GOST 13833−77 Plates, carbide disc for wood cutting saws. The design and dimensions (with Change No. 1)

GOST 13833−77*

Group 56

STATE STANDARD OF THE USSR

PLATE CARBIDE DISC FOR WOOD CUTTING SAWS

The design and dimensions

Plates of hard alloys for wood cutting disk saws.
Design and dimensions

OKP 19 6520

Date of introduction 1979−01−01

The decision of the State Committee of standards of Ministerial Council of the USSR of January 21, 1977 N 150 introduction installed from 01.01.79

PROVEN in 1983 by the Decree of Gosstandart from 30.06.83 2814 N validity extended to 01.01.94**
________________
** Expiration removed by Protocol No. 3−93 Interstate Council for standardization, Metrology and certification (ICS No. 5/6, 1993). — Note the manufacturer’s database.

REPLACE GOST 13833−68

* REISSUE (December 1983) with amendment No. 1, approved in June 1983 (ICS 11−83).

1. This standard covers carbide insert shape 01 D for disk wood cutting saws GOST 9769−79.

2. (Deleted, Rev. N 1).

3. The design and dimensions of plates shall be as specified in the drawing and in the table.2.

Damn. The design and dimensions of plates

Table 2*

________________
* Table.1 excluded.

mm

Example of designation plate dimensions =3.5 mm and =10 mm:

Plate 3001−0002 GOST 13833−77

(Changed edition, Rev. N 1).

4. Plates shall be made of hard alloys VK6 and ВК15 according to GOST 3882−74.

5. Approximate weight plates provided in the informational Annex.

6. Unspecified limit deviations of linear dimensions ±, angular dimensions ±.

Other technical requirements — GOST 4872−75.

(Changed the wording. Izm. N 1).

APP
Reference

THE APPROXIMATE WEIGHT OF THE CARBIDES OF THE FORM 01D