GOST 19063-80

• gost-19063-80.pdf (94.85 KiB)
  ГОСТ 19063-80

GOST 19063−80 cutting Inserts, indexable carbide multi-faceted five-sided shape. The design and dimensions (with Change No. 1)

GOST 19063−80

Group 56

INTERSTATE STANDARD

CUTTING INSERTS, INDEXABLE MULTI-FACETED
CARBIDE PENTAGONAL SHAPE

The design and dimensions

Pentagon throw-away (indexable) carbide cutting inserts.
Design and dimensions

ISS 25.100
77.160
OKP 19 6000

Date of introduction 1982−01−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from 19.06.80 N 2909

3. REPLACE GOST 19063−73

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from 29.12.90 N 3614

6. EDITION with Change No. 1, approved in December 1990 (IUS 4−91)


The requirements of this standard are mandatory.

(Added, Rev. N 1).

1. The design and dimensions of plates shall be as specified in the drawing and in the table.

________________
* Size for reference.

mm

________________
* See Appendix 3.


Example of designation when ordering plates of hard alloy VK6 brand, class of admission U, with cutting edge length =6.9 mm, thickness =3.18 mm, radius =0,8 mm:

19 6524

0386 060308

2. Approximate weight plates specified in Appendix 1.

3. The notation of plates according to GOST 19042.

4. Technical requirements — GOST 19086.

5. Applicable grades listed in Appendix 2.

(Added, Rev. N 1).

ANNEX 1
Reference

APPENDIX 1. (Changed edition, Rev. N 1).

APPENDIX 2 (recommended). Applied grades of plates

ANNEX 2
Recommended

N 3 — VK6; N 4 — VK8; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6; N 9 — ВП3115; N 11 — ВП1255.


APPENDIX 2. (Added, Rev. N 1).