GOST 20996.3-2016
GOST 20996.3−2016 Selenium technical. Method for determination of lead
GOST 20996.3−2016
Group B59
INTERSTATE STANDARD
SELENIUM TECHNICAL
Method for determination of lead
Technical selenium. Method for determination of plumbum
OKS 77.120.99
Date of introduction 2017−01−01
Preface
Goals, basic principles and main procedure of works on interstate standardization have been established in GOST 1.0−2015 «interstate standardization system. Basic provisions» and GOST 1.2−2015 «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. Rules of development, adoption, renewal and cancellation"
Data on standard
1 DEVELOPED by the Technical Committee for standardization TC 368 «Copper"
2 as AMENDED by the Federal Agency for technical regulation and Metrology (Rosstandart)
3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol dated February 29, 2016 N 85-P)
The adoption voted:
Short name of the country on MK (ISO 3166) 004−97 |
Country code MK (ISO 3166) 004−97 | Abbreviated name of the national authority for standardization |
Armenia |
AM | Ministry Of Economy Of The Republic Of Armenia |
Belarus |
BY | Gosstandart Of The Republic Of Belarus |
Kazakhstan |
KZ | Gosstandart Of The Republic Of Kazakhstan |
Kyrgyzstan |
KG | Kyrgyzstandard |
Russia |
EN | Rosstandart |
Tajikistan |
TJ | Tajikstandart |
Uzbekistan |
UZ | Uzstandard |
4 by Order of the Federal Agency for technical regulation and Metrology of 9 June 2016 N 584-St inter-state standard GOST 20996.3−2016 enacted as a national standard of the Russian Federation from 1 January 2017.
5 REPLACE GOST 20996.3−82
Information about the changes to this standard is published in the annual reference index «National standards», and the text changes and amendments — in monthly information index «National standards». In case of revision (replacement) or cancellation of this standard a notification will be published in the monthly information index «National standards». Relevant information, notification and lyrics are also posted in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet
1 Scope
This standard specifies the measurement of mass fraction of lead, by atomic absorption spectroscopy in technical selenium in the range of mass fraction from 0.001% to 0,060% incl.
2 Normative references
The present standard features references to the following international standards:
GOST 1770−74 (1042−83 ISO, ISO 4788−80) Glassware volumetric laboratory glass. Cylinders, beakers, flasks, test tubes. General specifications
GOST 3118−77 Reagents. Hydrochloric acid. Specifications
GOST 3778−98 Lead. Specifications
GOST 4461−77 Reagents. Nitric acid. Specifications
GOST 5457−75 Acetylene, dissolved and gaseous. Specifications
GOST 6709−72 distilled Water. Specifications
GOST 20448−90 liquefied hydrocarbon Gases fuel for household consumption. Specifications
GOST 20996.0−2014 Selenium technical. General requirements for methods of analysis
GOST 24104−2001* laboratory Scales. General technical requirements
________________
* On the territory of the Russian Federation GOST R 53228−2008 «Scales non-automatic actions. Part 1. Metrological and technical requirements. Test».
GOST 25336−82 Glassware and equipment laboratory glass. The types, basic parameters and dimensions
GOST 29169−91 (ISO 648−77) oils. Pipette with one mark
GOST 29227−91 (ISO 835−1-81) oils. Pipettes are graduated. Part 1. General requirements
GOST ISO 5725−6-2003* Accuracy (trueness and precision) of methods and measurement results. Part 6. The use of precision values in practice
________________
* On the territory of the Russian Federation GOST R ISO 5725−6-2002 «Accuracy (trueness and precision) of methods and measurement results. Part 6. The use of precision values in practice».
Note — When using this standard appropriate to test the effect of reference standards in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet or in the annual information index «National standards» published as on January 1 of the current year, and the editions of the monthly information index «National standards» for the current year. If the reference standard is replaced (changed), when using this standard should be guided by replacing (amended) standard. If the reference standard is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.