GOST 5017-2006

• gost-5017-2006.pdf (209.21 KiB)
  ГОСТ 5017-2006

GOST 5017−2006 Bronze tin pressure treated. Brand

GOST 5017−2006

Group W51

INTERSTATE STANDARD

BRONZE TIN PRESSURE TREATED

Brand

Wrought tin bronzes. Grades

ISS 77.120.30
GST 17 3620
17 3630

Date of introduction 2008−01−01

Preface

Goals, basic principles and main procedure of works on interstate standardization have been established in GOST 1.0−92 «interstate standardization system. Basic provisions» and GOST 1.2−97* «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. The procedure of development, adoption, application, renewal and cancellation"
_______________
* On the territory of the Russian Federation the document is not valid. Valid GOST 1.2−2009. — Note the manufacturer’s database.

Data on standard

1 DEVELOPED by the Technical Committee for standardization TC 106 «Tsvetmetprokat», Scientific-research, project and design Institute for alloys and processing of nonferrous metals «joint-stock company «Institute tsvetmetobrabotka» (JSC «Institute tsvetmetobrabotka»)

2 SUBMITTED by the Technical Secretariat of the Interstate Council for standardization, Metrology and certification

3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol No. 29 of June 24, 2006)

The standard was accepted by voting:

4 by Order of the Federal Agency for technical regulation and Metrology dated December 27, 2006 No. 497-St inter-state standard GOST 5017−2006 introduced as a national standard of the Russian Federation from January 1, 2008

5 REPLACE GOST 5017−74

6 REISSUE. January 2008

Information about introduction in action (termination) of this standard is published in the index «National standards».

Information about the amendments to this standard is published in the index «National standards», and the text changes — in the information sign «National standards». In case of revision or cancellation of this standard the appropriate information will be published in the information index «National standards»

1 Scope

This standard applies to the tin bronze, pressure treated, intended for the manufacture of semi-finished products used in various industries.

When referring to the tin bronzes should indicate the brand in accordance with this standard.

2 Normative references

This standard uses the regulatory references to the following international standards:

GOST 1953.1−79 Bronze tin. Methods for determination of copper

GOST 1953.2−79 Bronze tin. Methods for determination of lead

GOST 1953.3−79 Bronze tin. Methods for determination of tin

GOST 1953.4−79 Bronze tin. Methods for determination of phosphorus

GOST 1953.5−79 Bronze tin. Methods for determination of Nickel

GOST 1953.6−79 Bronze tin. Methods for determination of zinc

GOST 1953.7−79 Bronze tin. Methods of iron determination

GOST 1953.8−79 Bronze tin. Methods for determination of aluminium

GOST 1953.9−79 Bronze tin. Methods for determination of silicon

GOST 1953.10−79 Bronze tin. Methods for determination of antimony

GOST 1953.11−79 Bronze tin. Methods for determination of bismuth

GOST 1953.12−79 Bronze tin. Methods of determining sulphur

GOST 1953.13−79 Bronze tin. Method of determination of manganese

GOST 1953.14−79 Bronze tin. Method for determination of magnesium

GOST 1953.15−79 Bronze tin. Methods for determination of arsenic

GOST 1953.16−79 Bronze tin. Method of determining titanium

GOST 30608−98 of Bronze tin. XRF technology

ST SEV 543−77 Number. Record rules and rounding

Note — When using this standard appropriate to test the effect of reference standards for the sign «National standards» drawn up as of January 1 of the current year and related information signs, published in the current year. If the reference document is replaced (modified), then the use of this standard should be guided by the replaced (modified) document. If the reference document is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.

3 Stamps

3.1 Brand, chemical composition and sample designation tin bronzes shall be as given in table 1.

Table 1 — Chemical composition of the tin bronzes

3.2 Chemical composition of tin bronze depending on the grades determined according to GOST 1953.1−1953.16 GOST, GOST 30608.

Allowed the use of other methods of analysis, accuracy is not inferior to the above.

Arbitration methods of analysis point in the standards for specific types of products.

3.3 the analysis Results of each element are rounded according to the rounding rules established ST SEV 543, with the precision provided by table 1.

In disputable cases the results of the analysis is determined with the accuracy specified in the arbitration method of measurements.