GOST 25445-82

• gost-25445-82.pdf (122.64 KiB)
  ГОСТ 25445-82

GOST 25445−82 (ST SEV 2735−80) Drums, reels and cores for welding wire. Basic dimensions

GOST 25445−82
(ST CMEA 2735−80)

Group В05

STATE STANDARD OF THE USSR

DRUMS, REELS AND CORES FOR WELDING WIRE

Basic dimensions

Drums, reels and cores for welding wire. Basic dimensions

OKP 34 4193

Valid from 01.07.83
prior to 01.01.88*
_______________________________
* Expiration removed by Protocol No. 3−93
The interstate Council for standardization,
Metrology and certification (ICS No. 5/6, 1993). -
Note the manufacturer’s database.

DEVELOPED by the Academy of Sciences of the Ukrainian SSR

PERFORMERS

A. A. Kazimirov, PhD. tech. Sciences; A. I. Chvertko, d-R tekhn. D. (leader); G. M. Golosovsky

INTRODUCED by the Academy of Sciences of the Ukrainian SSR

Member of the Presidium of the Academy of Sciences of the Ukrainian SSR Acad. G. E. Pukhov

APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on standards of 9 September 1982 N 3578

1. This standard applies to drums, reels and cores for welding wire used in arc welding.

The standard fully complies ST SEV 2735−80.

2. The principal dimensions of drums shall be as specified in the hell.1 and in table.1.

_____________
* For drums with 100 mm.

Damn.1

Table 1

mm

______________
* Is not recommended.

3. The principal dimensions of coils shall be as specified in the hell.2 and in table.2.

Damn.2

Table 2

mm

______________
* Is not recommended.

4. Principal dimensions of the cores should match those in hell.3 and in table.3.

1 — core;  — the diameter of the contour of the coil wire

Damn.3

Table 3

mm