Alloy Amg4,5
Alloy 01311C
Alloy 1105
Alloy 1151
Alloy 1161
Alloy 1163
Alloy 1201
Alloy 1205
Alloy 1213
Alloy 1215
Alloy 1320
Alloy 1370
Alloy 1420 (01420)
Alloy 1424
Alloy 1430
Alloy 1440
Alloy 1441
Alloy 1450
Alloy 1531
Alloy 1541
Alloy 1541pc
Alloy 1543
Alloy 1577
Alloy 1905
Alloy 1911
Alloy 1915
Alloy 1925
Alloy 1931
Alloy 1933
Alloy 1935
Alloy 1953
Alloy 1955
Alloy 1973
Alloy 1980 (B48-4)
Alloy 1985h
Alloy 8011
Alloy 8011A
Alloy 8111
Alloy A1Mg1M1
Alloy ABT101 (1901)
Alloy ABT102 (1903)
Alloy AB (1340)
Alloy AVD1
Alloy AVD1-1
ABE Alloy
Alloy AD1pl
Alloy AD31 (1310)
Alloy AD31E (1310E)
Alloy AD33 (1330)
Alloy AD35 (1350)
Alloy AW
Alloy AZh0.6
Alloy AZh0.8
Alloy AZh1
Alloy AK10 (SvAK10)
AK12D alloy
Alloy AK4 (1140)
Alloy AK4-1 (1141)
Alloy AK4-2 (1143)
Alloy AK5
Alloy AK6 (1360)
Alloy AK6-1
Alloy AK8 (1380)
AKM Alloy
Alloy AKCM
Alloy AM4
Alloy AMg0.5 (1505)
Alloy AMg0,5pc
Alloy AMg0.7
Alloy AMG1 (1510)
Alloy AMg1.5
Alloy AMg2 (1520)
Alloy AMg2.5
Alloy AMg3 (1530)
Alloy AMg3.5
Alloy AMg3S
Alloy AMg4 (1540)
Alloy AMg4.5
Alloy AMg5 (1550)
Alloy AMg5P (1557)
Alloy AMg6 (1560)
Alloy AMg61 (1561)
Alloy AMg61H (1561H)
Alloy AMg63 (СвАМг63)
Alloy AMg65
Alloy AMSH1
Alloy AMSH2
Alloy AMZ (1400)
Alloy AMTS (1401)
Alloy AMSh1 (AMSh-1)
Alloy APBA-1 (1551)
Alloy ACpl
Alloy B-1341
Alloy B-1461
Alloy B-1469
Alloy B-1963
Alloy B48P
Alloy B65 (1165)
Alloy B91 (1913)
Alloy B92 (1920)
Alloy B93 (B93pch; 1930)
Alloy B94 (1940)
Alloy B95 (1950)
Alloy B95-1
Alloy B95-2
Alloy B95och
Alloy B95P (1957)
Alloy B95pch
Alloy B96C (1960)
Alloy B96C1
Alloy B96C3 (1965-1)
Alloy VD1
Alloy VD17 (1170)
Alloy D1 (1110)
Alloy D12 (1521)
Alloy D16 (1160)
Alloy D16P (1167)
Alloy D18 (1180)
Alloy D19 (1190)
Alloy D19P (1197)
Alloy D19h
Alloy D1P (1117)
Alloy D20 (1200)
Alloy D21 (1210)
Alloy D23 (WAD23; 1230)
Alloy D24 (VAD1; 1191)
Alloy K48-1
Alloy K48-2 (1941)
Alloy K48-2pch (1943)
Alloy K48P
Alloy M40
Alloy MM (1403)
Alloy SAB1
Alloy SAW2
Alloy SAB6
Alloy SAB9
Alloy SIL 1C
Alloy SIL 2S
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | АМг4,5 |
| Designation GOST Latin | AMg4,5 |
| Transliteration | AMg45 |
| The chemical elements | - |
Description
Alloy Amg4,5 is used: for the manufacture of semifinished products by hot or cold deformation; details for aircraft and instrumentation.
Note
The alloy system Al-Mg.
ISO 209−1 alloy brand Amg4,5 is the designation AlMg4,5 and 5083.
Also similar in chemical composition and properties is an alloy AlMg5Cr (5056) chemical composition: Si ≤ 0,30%, Fe ≤ 0,40%, Cu ≤ 0,10%, Mn = 0,50−0,20%, Mg = 4,50−5,60%, Cr = 0.05 to 0.20%, Zn ≤ 0.10%, the mass fraction of each other (not regulated) impurities ≤ 0.05% of the total mass fraction of other impurities ≤ 0.15 percent.
Standards
| Name | Code | Standards |
|---|---|---|
| Non-ferrous metals, including rare metals, and their alloys | В51 | GOST 4784-97 |
| Sectional and shaped rolling | В52 | OST 1 92093-83 |
Chemical composition
| Standard | Mn | Cr | Si | Fe | Cu | Al | Ti | Zn | Mg |
|---|---|---|---|---|---|---|---|---|---|
| GOST 4784-97 | 0.4-1 | 0.05-0.25 | ≤0.4 | ≤0.4 | ≤0.1 | The rest | ≤0.15 | ≤0.25 | 4-4.9 |
Al is the base.
According to GOST 4784-97, the mass fraction of each other impurity (not regulated) is ≤ 0.05%, the total mass fraction of other impurities is ≤ 0.15%.
According to GOST 4784-97, the mass fraction of each other impurity (not regulated) is ≤ 0.05%, the total mass fraction of other impurities is ≤ 0.15%.
Technological properties
| Name | The value |
|---|---|
| Weldability | The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. Weld joint efficiency is 0.9-0.95 % of the strength of the basic material. |
| Pressure treatment | Well-deformed in hot and cold condition. |
| Corrosion resistance | Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum. |
| Machining by cutting | Machinability is good. |
