Steel 10ХСНД

VSt6ps VSt5sp VSt3kp VSt4kp VSt6sp VSt2kp Vst4ps St0 VSt2ps VSt3ps VSt5ps VSt2sp VSt3sp 18К 08ps 10ps 15К 18kp 20ps 35 55 05kp 08Ю 15kp 20 (20А) 22К 40 58 (55ПП) 08 10 (Art. 10) 12К 15pc 20К 25 45 60 08kp 10kp 15 16К 20kp 30 50 0cB 60С2 60C2XA 50XFA 60C2A 60C2CHFA 65C2VA 85 55XGR 65 70C3A 55С2 60Г 60C2H2A 65Г 70 75 SHKH15 SHKH15SG SH4 А12 А20 A40G А30 10XNDP 14G2AF 15G2AFDps 17GS 18G2AFps 09Г2 10G2BD 10ХСНД 12GS 15G2SFD 16GS 35GS 14CGS 15ХСНД 20ХГ2Ц 09G2S 10G2S1 14Г2 16G2AF 17G1S 25G2S 10Г2 14X2GMR 15KHF 18CR2N4MA 20Г 20X2H4A 20XGR 20KHN2M (20KHNM) 30Г 30CGS 30CRNI2MA 34CRNI3M 35Х 38CR2N3M 38XA 38CMA 3CR3M3F 40Х 40XFA 45CRN 50Г2 12XH2 15Х 20KHGSA 20XHN3A 25CGSA 30KHGSA 30CRNI2MOVA 33HS 35KHN1M2FA 38CR2NM 40Г 40CR2H2MA 40CRN 45Г 45CRNI2MOVA 50Х 12XH2A 18CGT 20CRNR 20CRNI4FA 25CGT 30Х 30CGSN2A 30KHN3A 34CRNI1M 35Г 36CR2NI2MOVA 38KH2NMF 38CRN 38CRNI3MA 40Г2 40CRNI2MA 45Г2 47GT 50XH 12CR2N4A 12XHN3A 15Г 18CR2N4VA 20Х 20XH 20XNR 30CGT 30ХН3М2ФА 35Г2 35CGSA 38CR2H2MA 38CRNI3MOVA 40HS 45Х 50Г

Description

Steel 10ХСНД

Steel 10KhSND: a brand of steels and alloys. Below is a systematized information on the purpose, chemical composition, types of supplies, substitutes, temperature of critical points, physical, mechanical, technological and casting properties for the grade — Steel 10KhSND.

General information about steel 10HSND

Substitute brand

steel 16G2AF

Delivery type

Sheet 10xsnd, corner 10xsnd, circle 10xsnd, pipe 10xsnd, long products, including shaped: GOST 19281−73, GOST 2590−71, GOST 2591−71, GOST 8239−72, GOST 8240−72, GOST 6713−75, GOST 535−79, GOST 5521−86, GOST 8509−86, GOST 8510−86. Thick sheet GOST 19282−73, GOST 19903−74, GOST 5521−76, GOST 6713−75. Sheet 10khsnd thin GOST 17066−80, GOST 19903−74, GOST 19904−74, GOST 5521−86. Strip GOST 19281−73, GOST 82−70, GOST 103−76, GOST 6713−75, GOST 14637−79, GOST 19282−73, GOST 5521−76. Forgings and forged billets GOST 1133−71. Pipes 10khsnd OST 14−21−77.

Application

elements of welded metal structures and various parts to which the requirements of increased strength and corrosion resistance are imposed with limited weight and operating at temperatures from -70 to 450 ° C.

Chemical composition of steel 10HSND

Chemical element	%
Nitrogen (N), no more	0.008
Silicon (Si)	0.8−1.1
Manganese (Mn)	0.5−0.8
Copper (Cu)	0.4−0.6
Arsenic (As), no more	0.08
Nickel (Ni)	0.5−0.8
Sulfur (S), no more	0.040
Carbon ©, no more	0.12
Phosphorus (P), no more	0.035
Chromium (Cr)	0.6−0.9

Mechanical properties of steel 10ХСНД

Heat treatment, delivery condition	Section, mm	σ _0.2, MPa	σ _B, MPa	δ ₅ ,%
Sections and sections	<15	390	530	19
Sheets 10hsnd and strips as delivered (cross samples)	15−32	390	530	19
Sheets 10hsnd and strips as delivered (cross samples)	32−40	390	530	19
Hot rolled sheets 10hsnd	2−3.9		530

Mechanical properties at elevated temperatures

test t, ° C	σ _0.2, MPa	σ _B, MPa	δ ₅ ,%	ψ,%
Sheets 10xsnd 20 mm thick. Normalization
20	410	540	36	71
100	360	500	33	71
200	330	470	28	70
300	305	480	28
400	295	490
500	265	370	thirty	77
600	195	215	35	87
700	140	160	47	94
800	59	78	71	87
900	59	78	70	95

Technological properties of steel 10ХСНД

Forging temperature

The beginning is 1200, the end is 850.

Weldability

weldable without restrictions. Welding methods: RDS, ADS submerged arc and gas shielded, EShS.

Machinability by cutting

In the normalized and tempered state σ _B = 560 MPa K _{υ tv.spl.} = 1,4, K _{υ b.st.} = 1.12.

Tendency to release ability

not inclined

Flock sensitivity

not sensitive

Impact strength of steel 10ХСНД

Impact strength, KCU, J / cm ²

Delivery status, heat treatment	-40	-40 (KCV)	-70 (KCV)	-70
GOST 19281−73. Sections and shapes with a section of 5−10 mm		49	34
GOST 19281−73. Sections and shapes with a section of 10−15 mm		39	29
GOST 19282−73. Sheets 10xsnd and strips (Cross samples) with a section of 5−10 mm	49			34
GOST 19282−73. Sheets 10xsnd and strips (Cross samples) with a section of 10−15 mm	39			29
GOST 19282−73. Sheets 10xsnd and strips (Cross samples) with a section of 15−32 mm	49			29
GOST 19282−73. Sheets 10xsnd and strips (Cross samples) with a section of 32−40 mm	49			29

Endurance limit of steel 10HSND

σ _-1, MPa	τ _-1, MPa	Heat treatment, steel condition
284	167	Thickness 4−32
274	167	Thickness 33−40

Physical properties of steel 10ХСНД

Test temperature, ° С	20	100	200	300	400	500	600	700	800	900
Normal elastic modulus, E, GPa		197	201	195	188	180	169	156	135	125
Thermal conductivity coefficient W / (m ° С)		40	39	38	36	34	31	29

Steel 10ХСНД

Description