Alloy Nmg0,08v
Alloy NK0.2E
Alloy HE1
Alloy NMoPe15-10
Alloy NMC
Alloy HMg0.1
Alloy HMg0.08v
Alloy HMg0.05v
Alloy NMg
Alloy NKoZHKT19-1,9-1,5-0,4
Alloy NKaB0,15-0,5
Alloy NKa0.13 (NIKA-2)
Alloy NKa0.07 (NIKA-1)
Alloy NK0.04
Alloy Nicosi
Alloy NVMg6v
Alloy NVMg3v
Alloy NVMg3-0,08v
Alloy NVMg3-0,05v
Alloy NVJAK5,5-0,8-0,8-1 (NIVO-6)
Alloy HB6V
Alloy HB3v
Alloy HB3
Alloy Alunik 7-1
Designation
Name | The value |
---|---|
Designation GOST Cyrillic | НМг0,08в |
Designation GOST Latin | HMg0,08b |
Transliteration | NMg008v |
The chemical elements | NiMg0,08в |
Description
Alloy Nmg0,08v used: for the production of forged bars for the manufacture of thin-walled tubes and strip thickness of 0.05−2.0 mm, used in electronics and other industries; the cathodes.
Note
Alloy vacuum smelting.
The alloy Nmg0,08v according to ST SEV 1257−78 match the alloy NiMg0,08. The alloy Nmg0,08v toughened silicon content, the standard oxygen content.
Standards
Name | Code | Standards |
---|---|---|
Pipes from non-ferrous metals and alloys | В64 | GOST 13548-77 |
Non-ferrous metals, including rare metals, and their alloys | В51 | GOST 19241-80, GOST 28873-90 |
Tapes | В54 | GOST 2170-73 |
Bars | В55 | TU 48-0814-115-2000 |
Chemical composition
Standard | C | S | P | Mn | Si | Ni | Fe | Cu | As | Al | Zn | Sn | Sb | Pb | Bi | O | Co | Mg | Cd |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GOST 19241-80 | ≤0.04 | ≤0.003 | ≤0.001 | ≤0.01 | ≤0.006 | The rest | ≤0.04 | ≤0.02 | ≤0.001 | ≤0.01 | ≤0.002 | ≤0.001 | ≤0.001 | ≤0.001 | ≤0.001 | ≤0.003 | ≤0.1 | 0.07-0.1 | ≤0.001 |
Ni is the basis.
According to GOST 19241-80 the sum of the mass fractions of nickel and cobalt is ≥ 99.80%. The oxygen content is indicated for the alloy in ingots.
According to GOST 19241-80 the sum of the mass fractions of nickel and cobalt is ≥ 99.80%. The oxygen content is indicated for the alloy in ingots.
Mechanical characteristics
σB, MPa | d5, % | d10 |
---|---|---|
Tape supplied according to GOST 2170-73 (samples) | ||
≥340 | ≥31 | ≥30 |
≥440 | ≥12 | ≥10 |
≥540 | ≥3 | ≥2 |
Description mechanical marks
Name | Description |
---|---|
σB | Limit short-term strength |
d5 | Elongation after rupture |
d10 | Elongation after rupture |