By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy NMG

Alloy NK0.2E Alloy HE1 Alloy NMoPe15-10 Alloy NMC Alloy HMg0.1 Alloy HMg0.08v Alloy HMg0.05v Alloy NMg Alloy NKoZHKT19-1,9-1,5-0,4 Alloy NKaB0,15-0,5 Alloy NKa0.13 (NIKA-2) Alloy NKa0.07 (NIKA-1) Alloy NK0.04 Alloy Nicosi Alloy NVMg6v Alloy NVMg3v Alloy NVMg3-0,08v Alloy NVMg3-0,05v Alloy NVJAK5,5-0,8-0,8-1 (NIVO-6) Alloy HB6V Alloy HB3v Alloy HB3 Alloy Alunik 7-1

Designation

Name The value
Designation GOST Cyrillic НМг
Designation GOST Latin HMg
Transliteration NMg
The chemical elements NiMg

Description

NMG alloy used: for the manufacture of pipes; tape thickness of 0.05−2.0 mm, used in electronics and other industries; the cathodes.

Standards

Name Code Standards
Pipes from non-ferrous metals and alloys В64 GOST 13548-77
Non-ferrous metals, including rare metals, and their alloys В51 GOST 19241-80, GOST 28873-90
Tapes В54 GOST 2170-73

Chemical composition

Standard C S P Mn Si Ni Fe Cu As Zn Sn Sb Bi Mg Cd
GOST 19241-80 ≤0.05 ≤0.005 ≤0.001 ≤0.03 ≤0.02 The rest ≤0.07 ≤0.05 ≤0.001 ≤0.005 ≤0.001 ≤0.001 ≤0.001 0.02-0.07 ≤0.001
Ni is the basis.
According to GOST 19241-80 the sum of the mass fractions of nickel and cobalt is ≥ 99.60%. In the alloy of vacuum smelting, the mass fraction of zinc should be ≤ 0.0040%.

Mechanical characteristics

σB, MPa d5, % d10
Tape supplied according to GOST 2170-73 (samples)
≥390 ≥35 ≥32
≥440 ≥12 ≥10
≥540 ≥3 ≥2

Description mechanical marks

Name Description
σB Limit short-term strength
d5 Elongation after rupture
d10 Elongation after rupture

Our consultant will save your time

+49(1516) 758 59 40
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
Heat-resistant sheet, hn70yu sheet, HN65MV pipe, Inconel, 07h19n10b wire