GOST 2205-2016

• gost-2205-2016.pdf (954.80 KiB)
  ГОСТ 2205-2016

GOST 2205−2016 Tape tompakova for plating. Specifications

GOST 2205−2016

Group B54

INTERSTATE STANDARD

TAPES AND STRIPS FOR PLATING TOMPAKOVA

Specifications

L-90 tapes and strips for plating. Specifications

ISS 77.150.99
GST 18 4520
18 4530

Date of introduction 2017−04−01

Preface

Goals, basic principles and main procedure of works on interstate standardization established in GOST 1.0−2015 «interstate standardization system. Basic provisions» and GOST 1.2−2015 «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. Rules of development, adoption, renewal and cancellation"

Data on standard

1 DEVELOPED by the Technical Committee for standardization TC 106 «Tsvetmetprokat», Scientific-research, project and design Institute for alloys and processing of nonferrous metals «Joint-stock company «Institute tsvetmetobrabotka» (JSC «Institute tsvetmetobrabotka»)

2 as AMENDED by the Federal Agency for technical regulation and Metrology

3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol dated February 29, 2016 N 85-P)

The adoption voted:

4 by Order of the Federal Agency for technical regulation and Metrology, dated 22 August 2016 N 929-St inter-state standard GOST 2205−2016 introduced as a national standard of the Russian Federation from April 1, 2017

5 REPLACE GOST 2205−71

6 REISSUE. March 2017


Information about the changes to this standard is published in the annual reference index «National standards», and the text changes and amendments — in monthly information index «National standards». In case of revision (replacement) or cancellation of this standard a notification will be published in the monthly information index «National standards». Relevant information, notification and lyrics are also posted in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet (wwww.gost.ru)

1 Scope

This standard applies to tompakova (brass brand L90) cold-rolled strips and strips used for plating.

2 Normative references

This standard uses the regulatory references to the following international standards:

GOST 166−89 (ISO 3599−76) Calipers. Specifications

GOST 427−75 Rulers measuring metal. Specifications

GOST 1497−84 (ISO 6892−84) Metals. Test methods tensile

GOST 1652.1−77 (ISO 1554−76) Alloys copper-zinc. Methods for determination of copper

GOST 1652.2−77 (ISO 4749−84) Alloys copper-zinc. Methods for determination of lead

GOST 1652.3−77 (ISO 1812−76, ISO 4748−84) Alloys copper-zinc. Methods of iron determination

GOST 1652.4−77 Alloys copper-zinc. Methods for determination of manganese

GOST 1652.5−77 (ISO 4751−84) Alloys copper-zinc. Methods for determination of tin

GOST 1652.6−77 Alloys copper-zinc. Methods for determination of antimony

GOST 1652.7−77 Alloys copper-zinc. Methods for determination of bismuth

GOST 1652.8−77 Alloys copper-zinc. Methods for determination of arsenic

GOST 1652.9−77 (ISO 7266−84) Alloys copper-zinc. Method for the determination of sulfur

GOST 1652.10−77 Alloys copper-zinc. Methods for determination of aluminium

GOST 1652.11−77 (ISO 4742−84) Alloys copper-zinc. Methods for determination of Nickel

GOST 1652.12−77 Alloys copper-zinc. Methods for determination of silicon

GOST 1652.13−77 Alloys copper-zinc. Methods for determination of phosphorus

The Wire GOST 3282−74 General purpose low carbon steel. Specifications

GOST 3560−73 package steel Strip. Specifications

GOST 6507−90 Micrometers. Specifications

GOST 7502−98 metallic measuring tape. Specifications

GOST 9716.1−79 Alloy copper and zinc. Method of spectral analysis on a metal standard samples with photographic registration of spectrum

GOST 9716.2−79 Alloy copper and zinc. Method of spectral analysis of metal standard specimens with spectrum fotoelektricheskie registration

GOST 9716.3−79 Alloy copper and zinc. Method of spectral analysis on the oxide samples with photographic registration of spectrum

GOST 10510−80 (ISO 8490−86) Metals. Test method for the extrusion of sheets and strips for Eriksen

GOST 11701−84 Metals. Methods tensile tests of thin sheets and strips

GOST 14192−96 Marking of cargo

GOST 15527−2004 Alloys copper-zinc (brass) pressure treated. Brand

GOST 15846−2002 Products that are sent to the far North regions and equated areas. Packing, marking, transportation and storage

GOST 24047−80 Semi-finished products from nonferrous metals and their alloys. Sampling for tensile test

GOST 24231−80 non-ferrous metals and alloys. General requirements to selection and preparation of samples for chemical analysis

GOST 25086−2011 non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 26877−2008 metal Products. Methods of measuring form deviations of

GOST 32597−2013 Copper and copper alloys. Types of defects of billets and semi-finished

ST SEV 543−77 Number. Record rules and rounding

Note — When using this standard appropriate to test the effect of reference standards in the information system of General use — on the official website of the Federal Agency for technical regulation and Metrology on the Internet or in the annual information index «National standards» published as on January 1 of the current year, and the editions of the monthly information index «National standards» for the current year. If the reference standard is replaced (changed), when using this standard should be guided by replacing (amended) standard. If the reference standard is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.

3 Terms and definitions

3.1 this standard applies the terminology according to GOST 32597.

4 Assortment

4.1 the thickness of the tapes and tolerances for thickness shall be as specified in table 1.


Table 1